• Energy Research
• Restricted close
• 12. Responsible consumption close
• 2. Zero hunger close

This paper compares the quantity and quality of solid waste obtained from traditional ponds and recirculating aquaculture systems (RAS) for striped catfish and evaluates methane and compost production from these wastes. Striped catfish sludge was collected from four commercial ponds along the Mekong river and from three indoor RAS. The amount of sludge dry matter produced per kilogram of fish in ponds was 6 times higher than that in RAS. However, the concentration of nutrients in solid waste from RAS was much higher, with better compost quality and higher methane yield than that of sludge from ponds. Out of the collected 381 L biogas, the methane yield of striped catfish's solid waste in RAS systems was 201 L per kg chemical oxygen demand (COD). In ponds, the collected 267 L biogas yielded 125 L CH4 per kg COD. The higher methane production from RAS sludge concurred with higher digestibility of COD: 58% for RAS versus 38% for ponds. The quality and quantity of methane from striped catfish sludge were lower than that for other animal manures, and the resulting electricity yield was low. Considering the higher nutrient concentration in RAS-sludge, we recommend the combination RAS and composting in reusing sludge, which is presently the best option for a more sustainable and cleaner striped catfish production system.

Abstract In recent years, the overall energy consumption is increasing significantly and the energy consumption in the building sector represents over 30% of the global ones in developed countries. Thermal energy storage (TES) using phase change materials (PCM), which are materials able to store high amounts of energy as latent heat, is suggested as a possible solution to decrease the energy consumption. The authors of this paper developed materials able to encapsulate/stabilize PCM in addition to isolate an industrial residue from the steel recycling process: electrical arc furnace dust (EAFD). This waste is a hazardous dust, and when it is combined with a polymeric matrix produce dense sheet materials suitable for multilayered constructive systems. In this paper the physical, mechanical, thermal and acoustical characterization of two new materials with EAFD and PCM in a polymeric matrix for constructive system is presented. The results are compared with those obtained for one commercial dense sheet material available in the market, Texsound commercialized by TEXSA (Spain). The new dense sheet materials developed in this paper have similar acoustic properties compared to the results obtained for the commercial material and are competitive with it, even better because the new material incorporates PCM which increases the thermal inertia of final constructive system.

Several dairy farms in the Netherlands aim at reducing their environmental impact by improving the internal nutrient cycle (INC) at farm level. Practices to improve nutrient cycling at these INC farms, however, might not only reduce the environmental impact on-farm, but alter also the off-farm environmental impact associated with supply chain processes (production and transport) related to inputs entering the farm, such as purchased feed or fertilizer or the economic or societal performance of these farms. We compared, therefore, a set of sustainability indicators of nine INC farms with a group of benchmark farms, comparable in terms of farm size, intensity and site-specific circumstances. This benchmark group was composed using statistical matching to exclude the effect of these characteristics on economic, environmental and societal performance. Economic indicators used were: farm income per unpaid annual working unit and the costs to revenues ratio. Environmental indicators used were derived from a cradle-to-farm-gate life cycle assessment: land occupation (LO), non-renewable energy use (NREU), global warming potential (GWP), acidification potential (AP) and eutrophication potential (EP), expressed per kg fat-and-protein-corrected milk (FPCM). In addition, we quantified the soil content of organic carbon and phosphorus, and the soil nitrogen supply. Societal indicators used were: payments for agri-environmental measures, grazing hours and penalties for aberrant milk composition. Results showed that INC farms had a lower non-renewable energy use per kg FPCM, higher soil organic carbon content and received higher annual payments for agri-environmental measures, whereas economic and other environmental, societal indicators did not differed. Furthermore, we demonstrated the need for a sound benchmark to assess the effect of INC-farming on the economic, environmental and societal performance. Statistical matching enabled us to define, for each INC farm, a benchmark group with similar farm characteristics, which are known to affect sustainability indicators. Observed differences in sustainability indicators between both farm groups, therefore, truly resulted from aiming at internal nutrient cycling, and not from differences in other farm characteristics.

Stories play an exceptionally important role in how people assign value to a place. Taken together, all those stories essentially give a place an identity. The aim of placemaking is to ensure that the people using a place can appreciate that place. Placemaking approaches are focussed on strategic interventions in a place and aimed at changing the meaning and value of that place for local people, thus creating a qualitative place for enhanced storytelling. Using greenery is a common approach in place-making. Urban greenery has gone through a process of emancipation in the past 15 years. This emancipation has led to awareness that urban greenery is about more than just ecology and biodiversity, but also has social and economic consequences for a city’s fortunes. It is clear that green spaces do not stand alone: they are part of a complex urban system, and the use of green spaces in this complex system has immediate repercussions for how the city functions. With the changing role of green spaces within cities, the need to manage these spaces is emphasized. In this sense, the place-making approach, along with the storytelling approach could provide valuable insight on the planning and management of green spaces within the urban environment, with the aim to enhance quality of life by means of the social connection between people, the users of the space, and the qualitative place provided. This research illustrated that green space managers would need more social and organizational skills to manage modern urban green spaces in an attempt to create qualitative, usable spaces for citizens, spaces that are built upon stories and spaces that would further enable future stories of citizen life. The Story Behind the Place: Creating Urban Spaces That Enhance Quality of Life (PDF Download Available). Available from: https://www.researchgate.net/publication/271918395_The_Story_Behind_the_Place_Creating_Urban_Spaces_That_Enhance_Quality_of_Life [accessed Dec 21, 2015].

Need for reduction of energy use in greenhouse production has increased. First objective was to develop and validate a dynamic air temperature model. Second objective was to minimize total energy input to the greenhouse, for pre-set temperature boundaries. Optimal control techniques were used to minimize total energy input (cooling and heating). Results confirm that air temperature is on the upper boundary when cooling is applied and on the lower boundary when heating is applied. This work is a first step toward optimal deployment of a large array of possible options for the grower to optimally satisfy heat or cooling.

In themediumtolongterm,lowfossilfuelavailabilitywillmakeitnecessarytofindalternatives.Mass productionofbiofuelswillnotbeapracticalsolutionbecauseitrequiresstrongcompetitionforland that isusedforgrowingfood.Therefore,itwillbenecessarytorevisetheframeoftransportation energy sources.Thenumberofpurelight-andheavy-dutyelectricvehiclescouldincreaseinurban areas.Instead,itwillbehardtofindaviablealternativetotheinternalcombustionengineforextra- urban transportvehicles,thereforealternativesyntheticfuelscouldbeusedtocompensateforfossil fuel depletion.Asidefromasmallshareobtainablefrombiomass,mostsyntheticfuelsareexpectedto be obtainedfromcoal.Amongthese,syntheticnaturalgasrepresentsaverygoodsolution.Infact, syntheticnaturalgaswillbeadvantageouswithrespecttohydrogen,whoseon-boardstoragewillbean unsolvedprobleminthemediumterm,andwithrespecttosyntheticliquidfuels,whichrequiremore energy intheproductionphase.Moreover,thecarboncontentofliquidfuels,whichishigherthanthat of gaseousfuels,willberesponsibleforhigherCO2 emissionsfromvehicles.Currently,naturalgashas poor diffusioninthetransportsector,andthispaperhighlightsthemotivationsforfavouringapolicy aimedatincreasingtheshareofgaseousfuel-poweredvehicles.Inadditiontothelowenvironmental impact,syntheticnaturalgasalsooffersthepossibilityofoptimisingtheutilisationoffutureresources

Capítulos en libros The smart city is a sustainable and efficient urban center that provides high quality of life to its inhabitants with an optimal management of its resources, where clean and cost effective energy generation is a key issue. Under this setting, distributed generation can provide an adequate tool to deal with energy reliability and to successfully implement renewable sources; nevertheless, selection and scaling of energy systems, considering location, is not a trivial task. Frequently, the stakeholders analyze only one or two "popular" generation systems, and then calculate the output and return of investment in a simplified and approximated approach. This practice could lead the stakeholder to an inadequate technology mix. To tackle this problem, this paper reviews and models most common energy sources for distributed generation in a smart city context. Then, a technical economic analysis is developed for 2 cases, a household and a district, considering not only renewable sources but also efficient non-renewable technologies. The results of the numerical analysis help to assess the more adequate generation systems for a given application, energetic demand, and geographical characteristics. A well-developed analysis is essential for a better understanding of the available technologies and their synergies; as a result, the investors can choose the appropriate solutions, maximizing overall benefits. info:eu-repo/semantics/publishedVersion

Abstract An augmented measurement uncertainty approach for CO 2 emissions from coal-fired power plants with a focus on the often forgotten contributions from sampling errors occurring over the entire fuel-to-emission pathway is presented. Current methods for CO 2 emission determination are evaluated in detail, from which a general matrix scheme is developed that includes all factors and stages needed for total CO 2 determination, which is applied to the monitoring plan of a representative medium-sized coal-fired power plant. In particular sampling involved significant potential errors, as identified and assessed by the Theory of Sampling (TOS), which also shows how these can be eliminated and/or minimised. Since coal-related CO 2 emission calculations not only require analytical results of the carbon content of coal itself but also of the by-products fly ash and bottom ash, sampling procedures of these three materials were also given full attention. A systematic error (bias) is present in the current sampling approach, which increases the present uncertainty estimate unnecessarily. For both primary sampling and analytical sample extraction steps, random variations, which hitherto only have been considered to a minor extent, have now also been fully quantified and included in the overall uncertainty. Elimination of all identified sampling errors lead to modified CO 2 determination procedures, which indicate that the actual CO 2 emission is approximately 20,000 t higher than the present estimate. Based on extensive empirical sampling experiments, a fully comprehensive uncertainty estimate procedure has been devised. Even though uncertainties increased (indeed one particular factor is substantially higher, the so-called “emission factor”), the revised CO 2 emission budget for the case plant complies with the official pre-determined uncertainty levels maxima in the EU guidelines.