• Energy Research
• 2021-2025close
• 7. Clean energy close
• 6. Clean water close
• 1. No poverty close

This dataset includes input data to estimate learning-by-doing (LbD) and learning-by-researching (LbR) rates for onshore wind and solar PV in the United States. Using different learning curve approaches the simulated technology cost developments are also presented. Coefficient of determination (R square) and Root Mean Square Error (RMSE) were applied for quantification of the agreement between simulated and observed technology costs.

This data corresponds to the manuscript titled: Sustainable sugarcane vinasse biorefinement toward biobased chemicals and bioenergy generation

Cities are progressively heightening their climate aspirations to curtail urban carbon emis- sions and establish a future where economies and communities can flourish within the Earth’s eco- logical limits. Consequently, numerous climate initiatives are being launched to control urban car- bon emissions, targeting various sectors, including transport, residential, agricultural, and energy. However, recent scientific literature underscores the disproportionate distribution of climate poli- cies. While cities in the Global North have witnessed several initiatives to combat climate change, cities in the Global South remain uncovered and highly vulnerable to climate hazards. To address this disparity, we employed the Balanced Iterative Reducing and Clustering using the Hierarchies (BRICH) algorithm to cluster cities from diverse geographical areas that exhibit comparable socio- economic profiles. This clustering strives to foster enhanced cooperation and collaboration among cities globally, with the goal of addressing climate change in a comprehensive manner. In summary, we identified similarities, pa􏰀erns, and clusters among peer cities, enabling mutual and generaliza- ble learning among worldwide peer-cities regarding urban climate policy exchange. This exchange occurs through three approaches: (i) inner-mutual learning, (ii) cross-mutual learning, and (iii) outer-mutual learning. Our findings mark a pivotal stride towards a􏰀aining worldwide climate ob- jectives through a shared responsibility approach. Furthermore, they provide preliminary insights into the implementation of “urban climate policy exchange” among peer cities on a global scale.

Near continuous methane and CO2 fluxes measured along a transect on an ombrotrophic fen in Southern Sweden from August 2017-September 2019 using an automated greenhouse gas flux platform SkyLine2D. The impacts of drought (in 2018 the mire experienced drought conditions) and different vegetation types (sedge, heather, sphagnum or open water; 6 replicated for each) on the fluxes were determined. Fluxes were measured within collars of 20-cm diameter, 4-min at each collar. CH4 and CO2 fluxes were detected using a Licor infrared gas analyser (IRGA, LI-8100, Licor, NE, USA) to measure CO2 and a cavity ringdown laser (CRD, LGR U-GGA-91, Los Gatos Research, CA USA) to measure both CO2 and CH4. Fluxes of CO2 and CH4 were calculated using linear regression; a deadband of at least 20 seconds was allowed for the chamber headspace to mix and a window of 90 seconds was used for CO2 and 240 seconds used for CH4. Fluxes were adjusted for area, air temperature and gas volume. Further adjustment was made to the CO2 fluxes during daylight hours based upon the light response curve to account for attenuation of light by the chamber material, after. All data manipulation and analyses were carried out using SAS 9.4 (SAS Institute, CA 161 USA). GHG flux data (for both CO2 and CH4) were quality controlled in the first instance using the R2 statistic of the CO2 flux measurement, with values < 0.9 discarded. Measurements passing this threshold were then assessed using the output statistics from the regression calculation of CH4 fluxes, where regressions with a P value < 0.05 were accepted, while those that did not were treated as zero flux. Data outliers were defined as those ± 1.96 standard errors of the mean flux value for each collar and were excluded from the analyses. Data were further filtered to account for overestimation of fluxes during still atmospheric night-time conditions. Using the procedure fluxes where the mean CO2 concentration for the 20 second period before and after chamber closure dropped by more than 25 ppm where discounted. Net ecosystem exchange and methane fluxes were measured from a hemi-boreal ombrotrophic fen in Southern Sweden. An automated chamber system, SkyLine2D, was used to measure the fluxes near-continuously from August 2017 to September 2019. Four ecotypes were identified: sphagnum (Sphagnum spp), eriophorum, heather and water, to assess how these different ecotypes would respond to drought. The 2018 drought allowed comparison of fluxes between drought and non-drought years (May to September), and their recovery the following year.

Building energy simulation is an analytical process to help building owners and designers evaluate the energy performance of the building. Uncertainty in the building energy modelling influences the building renovation from two perspectives: 1) calculating as-built energy consumption, 2) analysing the energy performance of renovation alternatives. Energy models can enhance by incorporating contextual and surrounding data. To this aim, we conducted a systematic study to investigate the effect of surrounding buildings in different distances, heights, and directions in studying the as-built energy consumption of an example building. The research also investigates the impact of a specific surrounding building on the energy performance of three different renovation alternatives, namely the modification of windows, external walls, and roofs. The results demonstrate that a higher height to distance ratio of the surrounding buildings often causes a decrease in energy consumption. In addition, a surrounding building located in the south direction causes more effect on the energy result than other directions when the building is in the northern hemisphere. For renovation scenarios, if there is a specific building in the south of the building under renovation, the window modification leads to less energy consumption than other renovation scenarios. The paper discusses that for renovation projects, an initial examination of surrounding buildings before selecting the renovation alternative is crucial; since different placements of surrounding buildings can affect the performance of renovation scenarios differently, which can cause a variation in the cost of renovation.

This dataset, in the context of the MultiPACK Project, describes the development of a CO2 air/water reversible heat pump, specifically investigating the domestic hot water (DHW) production operating mode. A dynamic model of the heat pump is developed with the software Simcenter Amesim. After validation against experimental data, the numerical model is utilized to predict the performance of the heat pump to varying hot water demand, evaporator air inlet conditions and high-pressure value, leading to the discussion of the optimal control strategy. A paper, based on this dataset, "Experimental and numerical investigation of a transcritical CO2 air/water reversible heat pump: analysis of domestic hot water production (14th Gustav Lorentzen Conference, Kyoto, Japan, 6th- 9th December 2020, DOI:10.18462/iir.gl.2020.1160).

Abstract The metropolitan area of La Plata, Argentina, represents 1.6% of households in Argentina. Based on the analysis of the energy retrofit of a house, we provide indicators in order to propose a methodology that facilitates the extrapolation, at regional level, of the impact of a general energy retrofit in homes. The results obtained are presented from micro to macro level, in context of energy shortage and recurrent crisis in the supply of fuels and electricity in Argentina. The improved thermal resistance of walls and ceilings throughout the residential park of La Plata lead to a reduction of 12% of the energy consumed in heating, and a saving of 30,000 TEP / year. We conclude that the incidence of additional insulation on the cost of building justifies its use, partially solving the lack of fuel in our country, reducing fixed costs in housing, providing thermal comfort to users and generating economic reactivation of the construction sector.

This data release contains the boundaries of assessment units and input data for the assessment of undiscovered oil and gas resources in the Mowry formation of the Wind River Basin Province in Wyoming. The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary. Methodology of assessments are documented in USGS Data Series 547 for continuous assessments (https://pubs.usgs.gov/ds/547) and USGS DDS69-D, Chapter 21 for conventional assessments (https://pubs.usgs.gov/dds/dds-069/dds-069-d/REPORTS/69_D_CH_21.pdf). See supplemental information for a detailed list of files included this data release.

ABSTRACT Context: reflecting the call being made by the United Nations to solve our current climate challenges and reduce companies’ CO2 emissions, there is a strong need for large corporations to not only employ the terminology of sustainable transitions, but to implement strategies and select new alternative sustainable solutions. Objective: this study fills a gap in the literature by developing and validating a model that helps researchers understand the factors that enable a large corporation undergoing a sustainable transition to select its new sustainable practices. The developed model used theories of sustainability transition and institutional theory with three pillars (regulative, normative, and cognitive) in order to help understand the nature of the company’s innovation selection criteria. Method: survey-based research was carried out among an oil and gas company’s employees, and structural equation modeling was used to test the model fit, validate the survey, and test the hypotheses. Results: the results showed that normative and regulative pillars play the main role in selecting renewable energy activities as a first step toward the company’s sustainable future. Conclusion: the findings provide researchers with a valuable model for understanding the main criteria for selecting new sustainable projects in established companies.