• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• 7. Clean energy close
• 12. Responsible consumption close
• 6. Clean water close

Abstract In recent years living walls have increasingly spread, thus becoming a diffuse architectural envelope cladding technology. Consequently, a more precise understanding of their thermal behavior and impact on the building energy balance are needed. One of the most important effects provided by the use of living walls is the shading of the building envelope, with clear benefits during the cooling period. Furthermore, many features characterize the thermal behavior of living walls, namely plant species, leaf area index (LAI), evapotranspiration, emissivity and air cavity type. All these particular characteristics have been accounted in the mathematical model developed in the frame of the presented research, whose aim is to provide a tool for the prediction of the thermal behavior of living walls. Two kinds of living walls, one with grass and closed air cavity and the other one with vertical garden and open air cavity were considered. The results achieved by means of the developed model show a good agreement with the measurements also supported by model efficiency indexes such as Nash–Sutcliffe efficiency index (NSEC). Values of around 0.7 were obtained for the NSEC index for both the investigated living walls.

AbstractA reactor for catalytically oxidizing liquid methanol has been developed for supplying heat to an automotive reformer. In the tests presented in this paper we show that it is possible to catalytically combust liquid methanol by dispersing the methanol and air by a nebulizer over the catalysts. In the experiments we tested several base and noble metals and found that either platinum or palladium was required at the ignition zone. The tests also showed that it was possible to achieve complete combustion when only 25 % of the catalyst bed contained a noble metal.

Abstract This paper analyzes the impact of government procurement of reserve electricity generation capacity on the long-run equilibrium in the electricity market. The approach here is to model the electricity market in a context where the supply companies have market power. The model is then used to analyze the impact of government direct supply of peak capacity on the market. We find that the firms build less peak-generation capacity when the government procures peak generating capacity. The long-run equilibrium with N firms and government capacity of K G results in an increase of total peak generation capacity of K G /( N +1) compared to the long-run equilibrium with no government capacity. Supply disruptions of baseline capacity during the peak time period are also considered. It is found that peak prices do not go up any further with (anticipated) supply disruptions. Instead the entire cost of the extra peakers is borne by customers on traditional meters and off-peak customers who face real-time pricing.

Abstract A new formulation for the evaporation, flashing, condensation processes taking place in the effects of thermal desalination systems which simulates the operation of both forward and parallel/cross configurations is coupled with an exergo-economic model based on the SPECO method. The thermo-economic model uses accurate properties for the seawater, brine, pure water and vapour and is solved with an equation solver which does not require the development of a specific solution algorithm as in most previous studies. This flexible model is used to analyze the influence of the number of effects N and the temperature difference ΔT e between effects on the technical and economic performance of multi-effect desalination systems with ejector vapour compression. In particular, it is shown that the performance calculated by an earlier black-box approach is not attainable by technically and economically realistic systems. It is also shown that for each feed configuration and a given number of effects there exists an optimum value of ΔT e which minimizes the cost of the produced potable water. This last result forms the basis of a procedure that combines black-box results with the optimum value of ΔT e and can be used to select the appropriate system for any specific application.

Abstract: The dynamics of reformation and replacement of gas hydrates were studied under nonequilibrium conditions. It was found that the reformation of gas hydrates is largely affected by the state of the gas‐water system and the restarting temperature. This suggests that the effects are caused by changes in the structure of the aqueous solution at a molecular level. Pure samples of CH4 gas hydrate were synthesized from ice crystals and the dissociated solution using the reformation method. Replacement of CO2 gas hydrate is achieved within a short duration in the solid‐phase sample of CH4 gas hydrate, if the pressure and temperature is precisely controlled in a pressure vessel.

Abstract The commonly used transmutation rate of minor actinides in nuclear reactors is decomposed into four components, overall fission rate, Pu production rate, MA production rate, and element production rate. The physical meanings of these factors are described. The transmutation rates of minor actinides in two types of highly-moderated PWRs, a MOX fueled Na cooled fast reactor, and a metal fueled Pb cooled fast reactor are interpreted using the four components. The metal fueled Pb cooled fast reactor can incinerate minor actinides most (79kg/GWth/year), and this amount is about 4 times larger than the thermal reactors. The thermal reactors have large relative overall fission rates for 241 Am and have a potential for the incineration of 241 Am.

Following the environmental crises of recent decades, a turning point in the awareness of the fragility of ecosystems has been marked, i.e., environmental awareness. This has contributed to the development of various environmental laws and regulations such as the “Waste Electrical and Electronic Equipment,” the “Restriction of Hazardous Substances,” and the “Registration, Evaluation, Authorization and Restriction of Chemicals” regulations and the “Energy Using Products” Directives. Our work contributes to the development of eco-friendly product manufacturing processes. In order to estimate and optimize the environmental impacts of a product, most of the methodologies, concepts, and tools that integrate computer-aided design (CAD) and life cycle assessment systems generally exploit the feature technology at the level of each feature independently of the others, i.e., “microplanning.” The feature interaction technology (FIT) is treated only in few studies, but it is pivotal in the eco-manufacturing process. In this paper, we propose a new manufacturing-scenarios-based methodology by using FIT and a Multi-criteria Decision Support Method (MCDSM), which helps manufacturers maintain their marketplaces by producing goods in an eco-friendly way. In fact, this methodology helps designers choose from the CAD design phase the most ecological manufacturing process from possible existent scenarios in real time.

In this study, a comprehensive exergy analysis was applied to a solar power system (SPS) located in the city of Van, Turkey. Van was always known as a sun city throughout history with the name of TUSBA. It has an average of 300 sunny days a year, an altitude of 1727 m, and an average daily temperature of 9.85°C. Considering how the need for sustainable and renewable energy sources - and knowledge over them - constantly increases, this SPS was built to reveal the true solar potential of the campus area of Yuzuncu Yil University of the city of Van, hopefully as a precursor for further large-scale SPS constructions in the region. A daily analysis considering energy production and global radiation was applied to the system in 2013 for 365 days. It was found that the yearly exergy efficiency of the system was 10% and total electrical energy production was 31,038.95 kWh, averaging 1763.5 kWh/kWp yearly.

Interconnectivity and interoperability are very important features in the development of integrated energy management systems for industrial facilities. A simple and common strategy for exchanging energy-related information among the entities in a facility is currently lacking. To this end, the purpose of this study is to present an IoT-based communication framework with a common information model to facilitate the development of a demand response (DR) energy management system for industrial customers. Additionally, we developed and implemented an IoT-based energy-management platform based on a common information model and open communication protocols, which takes advantage of integrated energy supply networks to deploy DR energy management in an industrial facility. The experimental results of this study demonstrate that the proposed platform can not only improve the interconnectivity of the entities in industrial energy management systems but also reduce the energy costs of industrial facilities.