• Energy Research
• Open Access close
• Open Source close
• Embargo close
• 7. Clean energy close
• 11. Sustainability close
• 12. Responsible consumption close

Abstract The Seed-and-Blanket (SB it is few percent higher than that of the 2-stage PWR-ABR system. Approximately 7% of the thorium fed to the blanket is converted into energy, which makes the thorium fuel utilization approximately 12 times the utilization of natural uranium in PWRs. A comprehensive fuel cycle evaluation performed with the methodology developed by the recent U.S Department of Energy’s Nuclear Fuel Cycle Evaluation and Screening campaign concludes that the PWR-S&B system has similar fuel cycle performance characteristics as the PWR-ABR system. The S&B concept may potentially feature improved economics and resource utilization relative to the ABR.

We present the first calculations to follow the evolution of all stable isotopes (and their abundant radioactive progenitors) in a finely zoned stellar model computed from the onset of central hydrogen burning through explosion as a Type II supernova. The calculations were performed for a 15 solar mass Pop I star using the most recently available set of experimental and theoretical nuclear data, revised opacity tables, and taking into account mass loss due to stellar winds. We find the approximately solar production of proton-rich isotopes above a mass number of A=120 due to the gamma-process. We also find a weak s-process, which along with the gamma-process and explosive helium and carbon burning, produces nearly solar abundances of almost all nuclei from A=60 to 85. A few modifications of the abundances of heavy nuclei above mass 90 by the s-process are also noted and discussed. New weak rates lead to significant alteration of the properties of the presupernova core. 10 pages, 4 figures, Nuclear Astrophysics X Workshop proceedings

Points out that sustainability as such does not provide a clearcut guide to policy. First one has to decide what is to be sustained. If this is agreed, it must be in an operational from. However, difficulties may still emerge since opinions may differ about how to achieve. This is illustrated by differences in the views of economists about how sustainable development is to be achieved. Orthodox economists stress the importance of the accumulation of man-made capital to achieve this end whereas neo-Malthusians stress the importance of conserving natural resource and environmental capital. Both take an anthropocentric point of view. For political reasons the neo-Malthusian has had little support but it may eventually turn out to be correct. Economics is concerned with reducing economic scarcity and economists have traditionally suggested four main ways of doing this of which economic growth is one. However, neo-Malthusian economists believe that this may not be a sustainable strategy – it may result in future poverty. It should be noted that economic systems are embedded in social and natural systems and depend on these. Economic sustainability depends on the sustainability of these other systems. So from this point of view, it is just one of several bottom lines. Values must be considered in relation to sustainability. Economics is completely anthropocentric in its approach. Therefore, economic approaches to conservation and sustainability can be at odds with the values of deep ecologists or those willing to accord rights to other sentient beings or ecosystems independent of human wishes, or those who want to make use of value judgments other than those based on the measuring rod of money. Consequently economics evaluation is sometimes ineffective in resolving social conflict, including conflict about what should be sustained. As a rule economics alone should not be the final arbiter of social decisions. It is a part (often an important part) of the social evaluation process but not the bottom line, or just one of many lines.

An analytical Detailed Loop Model (DLM) has been developed to analyze the performance of solar thermosiphon water heaters with heat exchangers in storage tanks. The model has been used to study the performance of thermosiphons as a function of heat exchanger characteristics, heat transfer fluids, flow resistances, tank stratification, and tank elevation relative to the collector. The results indicate that good performance can be attained with these systems compared to thermosiphons without heat exchangers.

To study the heating performance of a solar-assisted cold-water phase-change-energy heat pump system, its heating performance under series and parallel connections is simulated for a community in Harbin, the influence of ice thickness on the different operation modes is analyzed, and the economy of the system is calculated for series and parallel connections in this paper. The results show that the water supply temperature is higher and more uniform in the parallel operation, and more terminal heat is supplied; the ice thickness has more of an influence on the series connection compared to the parallel connection; and the dynamic payback period is 6.72 years for the series connection and 7.28 years for the parallel connection. This case study can serve as a guide for practical engineering application projects and act as a reference for heating and economic data for the promotion of this heat pump system.

Fullerene-based materials are widely used as acceptor and electron transport layer materials in organic and planar perovskite solar cells. Modeling of electronic properties such as band alignment and charge transport for these applications is typically done using optimized geometries. Here, we estimate the effects of nuclear motions on band structure, and electron and hole transport in two prototypical fullerenes, C60 and C70. We model the dynamics in solid fullerenes using Density Functional Tight Binding and we use the Density Functional Theory based Projection of Monomer Orbitals on Dimer Orbitals (DIPRO) approach to estimate the effects on the charge transfer integral in the Marcus approximation. We show that room-temperature molecular dynamics cause a shift and spread of frontier orbital energies on the order of 0.1 eV, which leads to an increase by more than a factor of two in the Marcus exponent, and can cause a decrease by up to orders of magnitude in the overlap integral, leading, in most cases, to an overall decrease in the charge transport rate.

Abstract This work, framed in the IEA SHC Task 51 “Solar Energy in Urban Planning”, presents an illustrative perspective of solar energy in urban planning through the analysis of 34 international case studies conducted in 10 countries. The aim here is to examine challenges, barriers and opportunities for active solar systems and passive solar strategies by taking into consideration interrelated technical and non-technical aspects in ongoing and completed projects. It focuses on exposing potential pitfalls and illustrating lessons learned in case studies divided into three categories: (i) existing urban areas, (ii) new urban areas, and (iii) solar landscapes. The analysis has yielded insights into the solar energy strategy adoption, the evaluation of solar energy production, solar irradiation and daylighting, and the architectural quality, sensitivity and visibility of the solar systems for urban planning. The outcomes have implications to stimulate successful practices in implementing solar strategies in urban planning and facilitating their replicability worldwide by avoiding common mistakes.

Abstract The new multicomponent Co-based catalysts with additives of group 8 metal and rare earth elements and supported on alumina have been tested in the dry and steam conversion of a model biogas. The processes were carried out in a flow quartz reactor under the following conditions: atmospheric pressure, a gas hourly space velocity of 1000 h−1 and temperatures of 300–800°C. The catalysts were characterised using electron microscopy, BET and X-ray analysis. The methane is almost completely converted in the dry reforming of biogas at T≤800°C. Synthesis gas with a ratio of H2/CO>1.0 is a main product of biogas reforming over the multicomponent catalysts studied. Adding steam in a feed composition increases both the methane conversion and the hydrogen yield at lower temperatures. Almost complete methane conversion occurs at T<750°C in the steam reforming of biogas. The catalysts are highly effective and exhibit stable activity throughout 100 h of continuous testing.