• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• Embargo close
• 13. Climate action close
• 11. Sustainability close
• 2. Zero hunger close

Cogeneration of heat and electricity is an important pillar of energy and climate policy. To plan the production and distribution system of combined heat and power (CHP) systems for residential heating, suitable methods for decision support are needed. For a comprehensive feasibility analysis, the integration of the location and capacity planning of the power plants, the choice of customers, and the network planning of the heating network into one optimization model are necessary. Thus, we develop an optimization model for electricity generation and heat supply. This mixed integer linear program (MILP) is based on graph theory for network flow problems. We apply the network location model for the optimization of district heating systems in the City of Osorno in Chile, which exhibits the “checkerboard layout” typically found in many South American cities. The network location model can support the strategic planning of investments in renewable energy projects because it permits the analysis of changing energy prices, calculation of break-even prices for heat and electricity, and estimation of greenhouse gas emission savings.

Abstract The residual biomass of Cupriavidus necator , a biopolyester-producing bacterium, was liquefied in subcritical water at 300 °C. The hydrophobic organic compounds, accounting for about 45% carbon of the original biomass, were recovered with methylene dichloride for analysis. The organic compounds included hydrocarbons such as long chain alkane and benzene, and nitrogen-containing heterocycles such as pyrroles and indoles. The liquid had the similar elemental composition (C, H, O, N) and high heating value (34 MJ kg −1 HHV) of the bio-oils derived from microalgae biomass.

Renewable energy has become more popular since it is cost-effective and more efficient than conventional energy sources. Biomass-based renewable energy is primarily used in emerging economies to ensure environmental sustainability. This study examines the asymmetric correlation between biomass energy consumption and CO2 emissions in the top-10 biomass energy consumer countries (Brazil, Canada, Thailand, China, Italy, India, Germany, USA, UK, and Japan). A new approach "Quantile-onQuantile (QQ)" is employed by utilizing the data from 1991 to 2018. Biomass energy consumption, with the exception of Thailand, significantly mitigates CO2 emissions at various quantiles in selected countries. As a robustness check, we used the quantile regression test, whose findings are consistent with the outcomes from the quantile-on-quantile method. However, the degree of asymmetry in the biomass energy-CO2 nexus varies by country, necessitating extra attention and government vigilance when developing biomass energy and environmental policies.

It's not only the carbon in the trees Forest loss affects climate not just because of the impacts it has on the carbon cycle, but also because of how it affects the fluxes of energy and water between the land and the atmosphere. Evaluating global impact is complicated because deforestation can produce different results in different climate zones, making it hard to determine large-scale trends rather than more local ones. Alkama and Cescatti conducted a global assessment of the biophysical effects of forest cover change. Forest loss amplifies diurnal temperature variations, increases mean and maximum air temperatures, and causes a significant amount of warming when compared to CO 2 emission from land-use change. Science , this issue p. 600

Abstract Metallic solid-liquid phase change materials (SLPCMs) are crucial for the thermal energy storage technology of various industrial systems. However, the encapsulation of metallic SLPCMs is still technically difficult. In this pursuit, the present research envisaged the development of a novel technology to successfully prepare the core(=Al-Si/Bi)/void/shell(=Al2O3) composite SLPCMs by using Al/Bi immiscible alloy powders as starting material and tetraethoxysilane as SiO2 source. The Al-Si alloy and Al2O3 shell were in-situ synthesized by the displacement reaction between SiO2 and molten Al. Interestingly, most of the Bi distributed in the shell of Al/Bi immiscible alloy powders could not only improve the activity of alloy powders and promote the formation of precursor shell, but also be recycled by evaporation to form the void layer during the calcination process of composite SLPCMs. The produced void layer provided a space buffer to alleviate the volume expansion of the core SLPCM, and thereby improving the thermal cycling stability of the prepared composite SLPCMs. The thermal cycling test results showed that after 300 thermal cycles, the melting latent heat reduction of the core(=Al-Si/Bi)/void/shell(=Al2O3) composite SLPCMs (24.3–31.7 J/g) was much less than that of the core(=Al-Si)/shell(=Al2O3) composite SLPCM (58.1 J/g). Moreover, the prepared Al-Si/Bi/Al2O3 exhibited an adjustable melting temperature (571.9 °C to 631.9 °C) and average particle diameter (39.3 μm to 112.6 μm), relatively high thermal conductivity [2.068 W(mK)−1 to 2.966 W(mK)−1], and excellent thermal energy storage capacity (209.5 J/g to 278.2 J/g). Thus, the prepared Al-Si/Bi/Al2O3 composite SLPCMs are potential thermal energy storage materials, which can be used to improve the energy efficiency of various industrial systems.

Ammonia increases buffer capacity of methanogenic medium in mesophilic anaerobic reactor thus increasing the stability of anaerobic digestion process. Optimal ammonia concentration ensures sufficient buffer capacity while not inhibiting the process. It was found out in this paper that this optimum depends on the quality of anaerobic sludge under investigation. The optimal concentrations for methanogens were 2.1, 2.6 and 3.1 g/L of ammonia nitrogen in dependence on inoculum origin. High ammonia nitrogen concentration (4.0 g/L) inhibited methane production, while low ammonia nitrogen concentration (0.5 g/L) caused low methane yield, loss of biomass (as VSS) and loss of the aceticlastic methanogenic activity. It was found out that negative effect of low ammonia nitrogen concentration on biomass is caused not only by low buffer capacity but also by insufficiency of nitrogen as nutrient. It was also found out that anaerobic sludge with higher ammonia nitrogen concentration (4.2 g/L) tolerates even concentration of volatile fatty acids (160 mmol/L) which causes inhibition of the process with low ammonia nitrogen concentration (0.2 g/L).

Abstract In existing coal gasification processes a substantial part of the coal is used to provide the heat for the reaction, for the generation and superheating of steam and for the production of oxygen. By using heat from HTRs to substitute this part, the coal is then completely used as raw material for gas production. This offers the following advantages compared with the existing processes: a saving of coal, less CO2 emission and, in countries with high coal costs, lower gas production costs. A survey is given of the state of the project, discussing the first design of a commercial gasifier, the influence of the helium outlet temperature of the HTR, kinds of products, and the overall efficiency of the plant. The aim of the development is to demonstrate the use of heat from an HTR for full scale coal gasification, starting in 1985.

Abstract To ensure long-term availability of mobility and to keep the effects of humanity on global climate limited, politics, research, and industry currently search for ways to reduce greenhouse gas (GHG) emissions caused by it. A potential reduction could be achieved by transitioning towards more efficient transport modes, optimally powered by renewable energy. Based on mobility (commutes), population, and weather data from Switzerland, we present a model to compute energy savings due to a (hypothetical) widespread deployment of electric bicycles. In different scenarios, we analyze the dependence of the commuting energy demand on users’ preferences about when to take the bike, such as an aversion to biking on cold and rainy days. Our study shows that GHG emission reductions of up to approx. 10% of the total emissions from diesel and gasoline are possible. In combination with a widespread deployment of electric vehicles, further savings of up to 17.5% could be achieved. In particular, the willingness to drive longer commutes by e-bike influences the potential GHG emission reductions, followed by the willingness to use the bicycle at temperatures below 10°C. Using these results, we identify the spatial energy and greenhouse gas savings potential and thus regions that are particularly suited for e-bike use. The identification of regions with high saving potentials allows for targeted marketing, transition-supporting incentives, or infrastructural changes to maximize the reduction of emissions.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.