• Energy Research
• 2016-2025close
• Restricted close
• Open Source close
• Embargo close
• 7. Clean energy close

Materials:Rice straw, pine sawdust and Phoenix Tree's leaf were selected as the main biomass of this study. Algorithms and methods:Coats-Redfern integral method,Doyle method,Distribution Activation Energy Model (DAEM): The database contains all the original data, intermediate data and final results used in the paper. Fig. 1 was schematic diagram of WRT-3P high temperature TGA and gas flow routes Fig. 2 was influence of particle size on biomass pyrolysis kinetics (a) TG curves of rice straw (b) DTG curves of rice traw (c) TG curves of pine sawdust (d) DTG curves of pine sawdust (e) TG curves of Phoenix Tree's leaf (f) DTG curves of Phoenix Tree's leaf Fig. 3 was influence of heating rate on different biomass (rice straw, pine sawdust and Phoenix Tree's leaf) pyrolysis kinetics (a) TG curves of rice straw (b) DTG curves of rice traw (c) TG curves of pine sawdust (d) DTG curves of pine sawdust (e) TG curves of Phoenix Tree's leaf (f) DTG curves of Phoenix Tree's leaf Fig. 4 was potassium concentration of initial and soaked rice straw Fig. 5 was influence of K+ on rice straw pyrolysis kinetics (a) TG curves (b) DTG curves Fig. 6 was the relationship between and 1/T of three kinds of biomass with a particle size of 0.150 - 0.180 mm at different heating rates. (a) 5℃/min (b) 10℃/min (c) 20℃/min (d) 40℃/min Fig. 7 was the apparent activation energy of biomass pyrolysis obtained by DAEM.

Abstract High power pseudocapacitors are extremely relevant to answer specific needs in the current energy transition arena and to implement an efficient renewable energy society. However, literature shows that are still open gaps concerning improvement of their energy density at high power, conversion efficiency, cost and cycle life. Electrodes based on active transition metal compounds, and in particular metal sulphides, evidence high potential to meet these objectives. This work discusses the dependence on the synthesis route of the charge storage mechanism of manganese sulphide-based materials and relates the pseudocapacitive response of these electrodes with their polycrystalline nature. Results reveal that a manganese oxy-sulphide mixture can achieve a high specific capacitance of 231 F.g−1 at 0.5 A/g in a 0.65 V active window. These values represent a 31.5 % increase compared to pure rambergite, γ-MnS, and 436 % compared to pure hausmannite Mn3O4 prepared under the same conditions. Moreover, the results show that manganese oxy-sulphide electrodes are characterized by good charge retention (73%), and superior long term capacity retention (above 86%) after 5000 cycles, evidencing potential for high power energy storage applications.

The data contained in the Excel file is self-explanatory.More information may be added to this section later. Add cookbook info describing variables.

We employ qualitative content analysis on 29 survey responses from local officials around Japan’s 200 largest mega-solar plants constructed since 2012. Japan’s energy market has seen the siting and construction of over 2800 new mega-solar power plants since the introduction of the Feed-in Tariff policy in 2012. While scholars have highlighted the potential for community-engaged renewable power development with social benefits for local residents, many major mega-solar projects have instead resulted from industry-led initiatives in locations, largely avoiding community engagement. In this study, we draw from distributive energy justice perspectives to analyze social equity impacts of the mega-solar siting process. In our paper, we contextualize results through 18 interviews with relevant actors in six case studies. We find that given the existence of the Feed-in Tariff and sufficient solar irradiation, the availability of underutilized land decreases community bargaining power compared to historical power plant siting agreements. This results in primarily land leasing benefits and municipal tax revenue with minimal additional social impacts, such as employment. In our paper, we outline a model of causation for mega-solar social equity impacts, Japanese policy implications, and directions for future quantitative research.

Ammonia production through more efficient technologies can be achieved using exergy analysis. Ammonia production is one of the most important but also one of most energy consuming processes in the chemical industry. Based on a panel of solutions previously developed, this study helps to identify potential areas of improvement using an exergy analysis that covers all aspects of conventional ammonia synthesis and separation. The total internal and external exergy losses are calculated as 3,152 and 6,364 kJ/kg, respectively. The process is then divided into five main functional blocks based on their exergy losses. The reforming block contains the largest exergy loss (3,098 kJ/kg) and thus the largest potential for improvement including preheating cold feed through an economizer, developing technology towards isobaric mixing, and pressure drop reduction in the secondary reformer as the main contributors to the irreversibility (1,302 kJ/kg) in this block. The second largest exergy loss resides in the ammonia synthesis block (3,075 kJ/kg) where solutions such as reduced temperature rise across the compressor, proper compressor isolation, reducing undesired components such as argon in the reactor feed, and using lower temperatures for reactor outlet streams, are proposed to decrease the exergy losses. Throttling process in the syngas separator is the key contributing mechanism for the irreversibility (1,635 kJ/kg exergy losses) in the gas upgrading block. The exergy losses in the residual ammonia removal block (833 kJ/kg exergy losses) are mainly due to the stripper and the absorber column where a modified column design might be helpful. The highest exergy loss in the preheating block belongs to the compressors (518 kJ/kg exergy losses) where a lower inlet temperature and better system isolation could help to reduce losses.

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

This deliverable reports on the main characteristics of the thermal store design, collecting information from previous deliverables in order to define the sensors��� location. In addition, it reports on the integration of the system with the ASTEP components, and some simulations have been done using the UPCT model to verify that the demand of both end users is satisfied. This has covered summer and winter periods and both charging and discharging of the stores.

In this paper, the performances of two iron-based syngas-fueled chemical looping (SCL) systems for hydrogen (H2) and electricity production, with carbon dioxide (CO2) capture, using different reactor configurations were evaluated and compared. The first investigated system was based on a moving bed reactor configuration (SCL-MB) while the second used a fluidized bed reactor configuration (SCL-FB). Two modes of operation of the SCL systems were considered, namely, the H2 production mode, when H2 was the desired product from the system, and the combustion mode, when only electricity was produced. The SCL systems were modeled and simulated using Aspen Plus software. The results showed that the SCL system based on a moving bed reactor configuration is more efficient than the looping system with a fluidized bed reactor configuration. The H2 production efficiency of the SCL-MB system was 11 % points higher than that achieved in the SCL-FB system (55.1 % compared to 44.0 %). When configured to produce only electricity, the net electrical efficiency of the SCL-MB system was 1.4 % points higher than that of the SCL-FB system (39.9 % compared to 38.5 %). Further, the results showed that the two chemical looping systems could achieve >99 % carbon capture efficiency and emit ~2 kg CO2/MWh, which is significantly lower than the emission rate of conventional coal gasification-based plants for H2 and/or electricity generation with CO2 capture.

Abstract In this article, we investigate the intergenerational transmission of sustainable consumption practices. Whereas previous studies have used self-reported attitudes and behaviour, this study uses data on actual energy consumption for space-heating and hot water combined with extensive panel data from Danish administrative registers. The paper shows significant intergenerational correlations between the energy consumption patterns of adults and their mothers, also when controlling for the energy consumption of the mother-in-law, where possible. Furthermore, it shows that the intergenerational correlation is slightly stronger for adults with lower income levels. These results suggest that energy consumption practices are shared and reproduced within the family. Following theories of practice, the intergenerational similarities in energy consumption practices refer to bodily learned practices that are indirectly transmitted and negotiated through family relations. In this way, these findings also contribute to a better understanding of how practical understanding regarding how to perform practices is transmitted within more ordinary aspects of consumption that play a less obvious role in distinction. To ensure more sustainable consumption practices in the future, this paper points to the importance of the role of family relations and the transmission of embodied practices.