• Energy Research
• Open Access close
• Open Source close
• Embargo close
• 15. Life on land close
• 6. Clean water close
• 14. Life underwater close

ABSTRACT The progression of the organic loading rate (OLR) up to a certain limit increases biogas production. The limit and operation range vary according to the configuration of the reactor and are associated with other variables that generate different results with respect to biogas yield (BY) and biogas productiveness (BP). The aim of this study was to investigate the effect of the OLR on the BY and BP from swine manure in continuous stirred tank reactors (CSTRs) and upflow anaerobic sludge blanket reactors (UASBs). In the assay with the CSTR, the best operational condition was at an OLR of 0.7 gVS add L−1 reactor d−1 and a hydraulic retention time (HRT) of 18 days. At this operational condition, 0.8 LN biogas gVS add−1 of BY and 0.6 LN biogas L−1 reactor d−1 of BP were obtained. In the assay with the UASB, the best operational condition was at an OLR of 2.2 gVS add L−1 reactor d−1 and an HRT of two days, and 0.7 LN biogas gvs add−1 of BY and 1.6 LN biogas L−1 reactor d−1 of BP were obtained. The results demonstrate the effects of OLR changes on the biogas production in the CSTR and UASB, avoiding the underutilization or overloading of such equipment and enabling collaboration in projects for power generation from biogas in swine farms.

Project: Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets - These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. Summary: These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.ScenarioMIP.MIROC.MIROC6.ssp119' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The MIROC6 climate model, released in 2017, includes the following components: aerosol: SPRINTARS6.0, atmos: CCSR AGCM (T85; 256 x 128 longitude/latitude; 81 levels; top level 0.004 hPa), land: MATSIRO6.0, ocean: COCO4.9 (tripolar primarily 1deg; 360 x 256 longitude/latitude; 63 levels; top grid cell 0-2 m), seaIce: COCO4.9. The model was run by the JAMSTEC (Japan Agency for Marine-Earth Science and Technology, Kanagawa 236-0001, Japan), AORI (Atmosphere and Ocean Research Institute, The University of Tokyo, Chiba 277-8564, Japan), NIES (National Institute for Environmental Studies, Ibaraki 305-8506, Japan), and R-CCS (RIKEN Center for Computational Science, Hyogo 650-0047, Japan) (MIROC) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, land: 250 km, ocean: 100 km, seaIce: 100 km.

Dataset containing meiobenthos data for samples collected during the September 2008 Sesame Cruise in the North-West Black Sea on board of the Romanian R/V Mare Nigrum. Meiobenthos samples were collected in 5 stations, using a multicorer MARK II-400. The dataset includes 5 samples analysed for meiobenthos species composition, abundance and biomass.The entire washed sample was analyzed under the binocular stereomicroscope. Meiobenthic species were identified and enumerated; some meiobenthic species were identified and enumerated only at higher taxonomic level. Taxonomic identification was done at GEOECOMAR.

Abstract Activated carbon is commonly used as a material for contaminant-adsorption processes in aqueous systems. However, its use is more restricted to charcoal than to coal, for the most part, in view of the fact of the higher cost (~ 40%) if the mineral is a fossil fuel which needs to be extracted from the earth by mining. For this reason, the peach stone that comes from alimentary industrial tailings can be a good choice for the separation of pollutants from aqueous suspensions and other soluble substances. The purpose of this research was the development of a low-cost filter, using stones to remove atrazine from water. Appraisal and characterization studies were performed along with batch experiments to investigate dosing effects of the activated carbon, atrazine concentration, contact time, and adsorption pH on removal procedures. From the results of the experiment, an excellent removal of the analyte in question was observed under conditions that can be considered as close as possible to the environment, such as pH = 6.5, room temperature and 10 minutes of agitation time, always choosing the best alternative with the lowest cost of energy and time. Batch system application has been recommended as versatile for utilization in seasonal problems such as pesticide contamination.

Monthly and daily summary from Barro Colorado Island (BCI). Data organized in horizontal format for seasonal and inter-year comparisonsLocation 9°9'42.36"N, 79°50'15.67"WParameters: air temperature, relative humidity, wind speed and direction, precipitation, sea surface temperature, solar radiation (pyranometer), air pressure, soil moisture, runoff, potential evapotranspiration, wet/dry season starting datesLutz catchment is a 9.73ha protected watershed on BCIThe Lutz tower was built in 1972 and was originally 42m. In 2002 it was increased to 48mThe data from 48m should be considered a separate data series from the data at 42m. Wind speed is significantly higher at 48m due to the distance to the top of the canopy.The Clearing is a small, open area surrounded by forest and some buildings. Station established in 1972. Consists of a Stevenson screen with max/min thermometers and air pressure sensor. Temperature/humidity sensor, rain gauge and evaporation sensors are located at various locations around the screen.