• Energy Research
• Open Access close
• Closed Access close
• Restricted close
• Solar Energy close

Abstract Thermal performance of three naturally ventilated public buildings in which the wind tower is an important architectural freature is studied. One of the three builidings as well as it's wind tower is instrumented for temperature, relative humidity and airflow velocity measurements, and the other two are instrumented for temperature measurement. The results have led to a discussion concerning the degree of wind tower effectiveness in achieving thermal comfort.

Abstract The albedo of a roof determines the fraction of incoming sunlight that is reflected, which affects heat transfer into the building and exchange of energy between the built environment and the atmosphere. While the albedo of individual roofs can be easily measured, roof albedo at the city scale is unknown. In this paper we characterize the albedos of roofs in seven cities in California: Los Angeles, Long Beach, Bakersfield, San Francisco, San Jose, Sacramento, and San Diego. The fraction of urban area covered by roofs ranged by city from 10% to 25%. City-wide average roof albedo ranged from 0.17 ± 0.08 to 0.20 ± 0.11 (mean ± standard deviation) for five of the cities; values were higher in Sacramento (0.24 ± 0.11) and San Diego (0.29 ± 0.15). Buildings with small roofs were found to constitute a large fraction of city roof area and to have low mean albedos. This suggests that efforts to increase urban albedo through the use of reflective roofs should include small roofs, which are presumably mostly residential. Roof albedos derived for Bakersfield were used in a regional climate model (Weather Research and Forecasting Model) to estimate temperature changes attainable by converting the current stock of roofs to “cool” high albedo roofs. It was found that seasonal mean afternoon (15:00 LST) temperatures could be reduced by up to 0.2 °C during both the summer and winter. Changes in precipitation were not significant at the 95% confidence level.

Abstract Lighting simulation is a useful instrument in predicting lighting conditions in buildings. Modelers can use several matrix methods according to the buildings’ characteristics and the objectives of the analysis. However, it is unknown which methods are the most appropriate for lighting analysis of heritage buildings. The Joanina Library located in the University of Coimbra – a World Heritage building – was used to compare different matrix methods (2PH, 3PH, and 5PH) under several solar models (BRL, DISC, Perez, and Reindl) using Radiance-based simulations. On-site measurements (indoor and outdoor) were used to calculate each method’s accuracy under different solar models. The combination of the 2PH method with the DISC solar model presented the highest accuracy with an average MBEr and RMSEr of 2.8 % and 43.6 %, respectively. Therefore, the 2PH method was the best choice for the case study, even though the 3PH method may also be considered, especially for parametric studies of improving measures.

A simple model to evaluate the irradiance incident on tilted surfaces of various orientations is proposed in this paper. It is based on the knowledge of the monthly daily average values of global and diffuse radiation on horizontal surfaces and their distributions over a period of a day. These distributions are approximated by a modified Gaussian expression with two parameters, which take into account the morning-to-afternoon asymmetries. Integrating the irradiance over a period of an hour or a day, values of monthly hourly average and daily on variously oriented surfaces have been calculated for the locations of Barcelona, Genoa, and Montreal. The calculated values are generally in good agreement with the data derived by the observations.