• Energy Research
• other engineering and technologies close
• Aurora Universities Network close

Abstract In the present work, the hygrothermal behavior of a wall structure made of a novel biobased material, i.e. date palm fiber reinforced concrete was investigated. In this context, a specific setup was developed which allows simulating a bi-climatic environment with separate outdoor and indoor environments. This device made it possible to apply various scenarios of static / dynamic hygrothermal loading to the outer side of wall, involving variation/cycling of temperature (T) and /or relative humidity (RH). During these experiments, resulting variations of T and RH across the wall thickness were monitored with in-situ sensors. Outstanding thermo-hygric phenomena were highlighted, such as high coupling effect between heat and moisture transfers, resulting from evaporation-condensation and sorption-desorption processes. Besides, significant thermal and hygric inertia was observed through the Date Palme Concrete (DPC) wall. The response time of this DPC wall to temperature variations remains shorter than in the case of humidity variations. Even so, large damping effect is obtained compared to outdoor boundary conditions, which make this DPC wall a good candidate for mitigating overheating during summertime and reducing interstitial condensation as well.

In order to protect our health and the environment, numerous limit and guideline values have been laid down for substances and contaminants that need to be regularly monitored. In such cases, the result of an analytical measurement is compared with its corresponding limit value, and a conclusion is then drawn as to whether the given limit has been violated or not. A simple approach to this would be to simply check whether the measured value is higher than the limit value or not. However, this approach is only acceptable when the measured value is far from the limit value. In cases where the analytical result is close to the limit value, the measurement uncertainty must also be taken into account when deciding whether an observed limit value transgression is significant or not—as, for example, demanded in DIN EN 17025 [1]. Therefore, it is very important that chemical laboratories that perform routine tests for limit value transgression determine the measurement uncertainties associated with their methods by long-term validation [2, 3]. However, even in cases where a measurement result is presented together with its measurement uncertainty, clear rules should be established for comparing the measured value with a limit or guideline value [4, 5]. If such rules are misunderstood or ambiguous, feelings of insecurity can arise among the decision makers. If systematic errors are excluded, the measurement uncertainty can be reduced to random errors and dealt with statistically. Therefore, statistical concepts can be used to unobjectionably and reproducibly justify a decision made about whether a limit value has been violated or observed, and on the other hand to estimate the analytical effort required to achieve significant results. A test result leading to the statement that the limit value μ0 (in analogy to the terminology of clinical chemistry [7, 8]) has been transgressed will be called “positive,” while an inconspicious result will be termed “negative.” In this case, a test for a limit value transgression can lead to four possible outcomes, as listed in Table 1. Two types of erroneous outcome can occur, namely a false-positive (type I error) or a false-negative (type II error) result. The probability of a type I error is usually denoted α, and that of a type II error β.

This paper presents a comprehensive review of all correlations and experimental studies available in the literature to determine the heat transfer coefficient of supercritical CO2 flowing in heat exchangers. The different applications in which it is used are also reviewed and discussed. The correlations obtained from extensive experimental measurements are presented for different geometries (horizontal, vertical and inclined tubes, closed-loop circular pipes, and mini-channels) and dimensions. The review shows that there is a lack of a unique universal correlation for each geometry, suggesting the need for more work in this area. The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES), and the funds received by the Royal Society of New Zealand. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.

AbstractBecause of its low level of energy consumption and the small scale of its industrial development, the Tibet Autonomous Region has historically been excluded from China's reported energy statistics, including those regarding CO2 emissions. In this paper, we estimate Tibet's energy consumption using limited online documents, and we calculate the 2014 energy‐related and process‐related CO2 emissions of Tibet and its seven prefecture‐level administrative divisions for the first time. Our results show that 5.52 million tons of CO2 were emitted in Tibet in 2014; 33% of these emissions are associated with cement production. Tibet's emissions per capita amounted to 1.74 tons in 2014, which is substantially lower than the national average, although Tibet's emission intensity is relatively high at 0.60 tons per thousand yuan in 2014. Among Tibet's seven prefecture‐level administrative divisions, Lhasa City and Shannan Region are the two largest CO2 contributors and have the highest per capita emissions and emission intensities. The Nagqu and Nyingchi regions emit little CO2 due to their farming/pasturing‐dominated economies. This quantitative measure of Tibet's regional CO2 emissions provides solid data support for Tibet's actions on climate change and emission reductions.

The effect of trace elements (TEs) addition and NaOH pretreatment on the anaerobic digestion of rice straw was investigated in batch tests. Co, Ni and Se were added to the raw rice straw at different dosages. The NaOH pretreatment was applied to the rice straw both alone and in combination with the addition of TEs, in order to evaluate potential synergistic effects of the pretreatment and the TEs supplementation on the biogas production yields. The results obtained showed that the alkaline pretreatment was more effective than the TEs addition in increasing the cumulative biogas production, causing a 21.4% enhancement of the final biomethane yield, whereas the increase due to TEs dosing was not statistically significant. The analysis of volatile fatty acids (VFAs) confirmed that the NaOH pretreatment resulted in a higher production of VFAs, indicating an increased hydrolysis, while TEs addition did not cause significant changes in the VFA concentrations.

Solid-state refrigeration based on the caloric effects has recently received widespread consideration because of its high efficiency and environmental protection. Compared with other solid-state refrigeration technologies, the elastocaloric effect-based one has great application potential. The elastoCaloric Effect (eCE) is defined as the reversible adiabatic temperature change (ΔTad) and the reversible isothermal entropy change (ΔST) in Shape Memory Alloys (SMA), following a variation in the mechanical field applied. To date, the elastocaloric materials, considered as benchmark, since offering the best compromise between thermal and mechanical performances are represented by the NiTi binary alloys.

The method of fault position is useful for characterising power-system performance in the presence of voltage dips due to faults. It is based on short-circuit simulations repeated for all the system nodes and for many points along the system lines: fault voltages that are below a preset threshold are the required voltage dips. These dips are stored in so-called dip matrices which contain only the dips in all the system nodes when faults occur at points along the lines. The paper proposes a new compact analytical formulation of dip matrices for balanced and unbalanced faults in terms of bidimensional vector relations and for site- and system-voltage dip indexes. Compact formulations are very useful tools when several sensitivity analyses have to be conducted to estimate variation of site- and system-voltage dip indexes in relation to possible reinforcement and/or compensation devices. Graphical presentation of dip matrices is also proposed as a valuable tool to ascertain the critical area for system performance. Numerical applications to an actual transmission system are presented to demonstrate the easy applicability of the model.