• Energy Research
• engineering and technology close
• UA close
• Transport Research close

Purpose. In modern conditions of energy consumption growth and a rapid increase in energy prices the actual problem is the development and implementation of energy efficiency programs and resource-saving conversion in to a source to provide the needs of industry and municipal power. The paper aims to solve the urgent problem of energy saving and efficient use of fuel-energy ones and heat supply system optimization on the basis of Uman National University of Horticulture (UNUH). Methodology. The work investigated the process of heating and hot water supply in the course of 2007-2015 years. Implementation of current problems of energy saving is grounded on the scientific-practical and efficient assurance of fuel and energy usage. At the same time energy-saving technologies are viewed as a priority direction of the energy sector development, reduction of man-induced impact on the environment and as a way of improving the competitiveness of the national economy. Findings. Statistical data acquisition and analyzing of gas flow and outside air temperature for nine years was carried out. On the basis of this analysis, the problem was identified and specific targets for its solutions were set. Originality. Scientific novelty lies in solving the problem of energy saving and efficient use of fuel resources in Ukraine through the use of a systematic approach, the methodology development of efficient use of different fuels and optimization of local heating operation, applying contemporary automation and control systems. Firstly it was in detail analyzed and conducted the comprehensive assessment of various factors influence on energy conservation. It takes into account the human factor, professionalism and responsibility of the operators of boilers and their superiors, as well as the relevant control services. Practical value. For UNUH campus hybrid use of solid fuel and gas boilers was carried out. Decentralization of the university heating system has been conducted through the restoration of 350 individual heating systems in residential buildings, remote departments and campus dormitories. The conclusions propose the list of activities upon the real economy of fuel and energy resources, and measures to overcome the economic and political crisis in the country.

One of the most powerful modern methods of calculating complex building structures is the finite element method in theform of a displacement method for discrete systems, which involves the creation of a finite element model, that is, splittingthe structure into separate elements within each of which the functions of displacements and stresses are known. On the basisof the displacement method and the methods of iterations and half-division, an algorithm for stability calculation of the firstkind equilibrium form of compressed reinforced concrete columns with hinged fixing at the ends, considering the stiffnesschanging has been developed. The use of the above methods enables to determine the minimum critical load or stress at thefirst bifurcation and their stability loss corresponding form. The use of matrix forms contributes to simplification of high order stability loss equation. This approach enables to obtain the form of stability loss that corresponds to the critical load.

The paper represents the analysis, which has helped to establish the usage of gas hydrate technologies in the methane conversion. This gas could be obtained in different ways. Possibilities and sources for the gas obtaining have been demonstrated. Use of other environmentally friendly sources to support operation in such systems in terms of joint energy complex has been considered. The necessary kinetic connections to provide operational sustainability of all the constituents have been given. The approach helps evaluate quantitatively the priority of its physicochemical transformations to obtain gas hydrates artificially. It is possible to transport methane at considerable distances when it is solidified. Actually, in this case there is no necessity to build costly compressor stations and pipelines for its transportation to consumers. The approach is extremely important for mining regions as it helps prolong the operating period and working out of the abandoned and off-balance coal reserves. In this case, it is proposed to apply special gasification technologies tending to maximum methane recovery. The proposed solutions give the possibility to define the trends of our further research. They will be highlighted in the following authors’ studies.

Purpose.The railways of Ukraine have been operated the locomotives, which are both morally and physically obsolete. Therefore, to ensure the competitiveness of rail transport it is necessary to update the locomotive fleet, and first of all the fleet of electric locomotives, because electrified railways provide the greater part of passenger and freight traffic. In this connection it is of special importance to determine the optimum parameters of the nominal mode of electric rolling stock. The purpose of the work is to examine the features of solution of these problems with respect to electric locomotives. Methodology. Assuming that the limit values of traction force are determined by the conditions of wheel-rail grip, then the power of the nominal mode can be represented as the product of rated speed, estimated friction coefficient, train weight and the coefficients that represent the ratio of the estimated (starting) value of traction force to value of traction force the nominal mode and the ratio of the mass of the locomotive to the train weight. Since the mass of the train is not a constant value, there is always a surplus power of the locomotive fleet required for the mastering of a predetermined volume of transportations. Reduced overcapacity of the locomotive fleet can be achieved by introduction of the locomotives of different power, designed for driving trains of different weight that will result in increased completeness of the power use but also in difficulty in selecting of locomotives for trains in operation. The paper shows the method of calculating the optimum values of power, speed and traction force of the nominal mode. It presents the mathematical model of the relationship of traction rate, excessive capacity and power of the traction unit. Findings.It is proved that the power of the traction unit, the total fleet power requirement and the excess of power in absolute units are proportional to the speed of the nominal mode. To reduce the total power of the fleet when selecting the optimum power of the traction unit it is necessary to take into consideration the speed of the nominal mode, defined by the condition of minimization of power consumption for traction, i.e. the smallest value that enables the implementation of the given running speed and the powerredundancy level required for operation. Originality. It consists in the development of a unified algorithm for determining the optimal parameter values of the nominal mode of passenger, freight and freight-passenger electric locomotives. Practical value. The authors determined the minimization costs during production, acquisition and maintenance of electric locomotives, whose nominal mode parameters are designed according to the above procedure.

This article addresses the problem that fluctuations in the torque of an internal combustion engine (ICE) lead to additional energy losses, as it causes fluctuations in the speed and kinetic energy of the car. These losses increase as the frequency of oscillations of the torque of the internal combustion engine approaches the frequency of free (natural oscillations) of the running gear of the car in the longitudinal direction. If there is an elastic connection between the traction force and the movement of the car, the movement of the latter can be represented as complex. At the same time, the portable movement is uniform, and the relative movement is oscillatory. This article presents the results of the study of these losses for cars with mechanical and combined electromechanical drive wheels. Analytical expressions are obtained, which allows to take into account additional energy losses including the tangential rigidity of the tire and the rigidity of the suspension in the longitudinal direction. When using a combined electromechanical drive of the drive wheels as well as in the case of a mechanical transmission of a car, the resonance is dangerous. But with the increase in the share of torque kem on the wheel generated by the electric motor, the relative additional energy losses for the movement of the car are reduced.

Purpose. Efficient use of natural energy resources is one of the priorities of the state policy in the sphere of universities and institutions of the Ministry of Education and Science of Ukraine. Besides search and development the new efficient and clean energy systems it is necessary to implement optimal management of the development and operation of existing facilities, reducing their energy costs. Purpose of this work is to develop consumption volume technology of electricity and heat by scientific departments of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan (DNURT) for further finding the ways to reduce energy consumption. The problem is due to the specifics of University’s energy scheme. There is a difficulty for the installation of energy meters and data acquisition about their use in individual branches and structural units. At the same time it is impossible to assess qualitatively the energy position of scientific departments. Methodology. The method to determine the electricity and heat consumption for space heating of scientific departments at the university is based on «The intersectoral rules of electricity and heat energy for institutions and public sector organizations in Ukraine» and «Codes and regulations on rationing of fuel and heat energy for heating the residential buildings as well as for economic needs in Ukraine». Findings. Developed determining expenditure technology of electricity and heat for heating by scientific departments at the DNURT named after Academician V. Lazaryan allows obtaining data on energy consumption in individual units without direct measure and analyzing the effectiveness of energy saving technologies. Originality. It is represented by energy costs in the form of two components and these components are defined on the basis of the energy audit. This enables the energy inputs to implement energy efficiency measures in the research departments of the university. Practical value. The developed method can be used as practical tools to monitor energy consumption in the above mentioned university and in similar facilities.

Purpose. The work is aimed to design a system for automatic selection of the optimal traffic modes and automatic monitoring of the electric energy consumption by electric transport. This automatic system should provide for the minimum energy expenses. Methodology. Current methodologies: 1) mathematical modeling of traffic modes of ground electric vehicles; 2) comparison of modelling results with the statistical monitoring; 3) system development for automatic choice of traffic modes of electric transport with minimal electrical energy consumptions taking into account the given route schedules and the limitations imposed by the general traffic rules. Findings. The authors obtained a mathematical dependency of the energy consumption by electric transport enterprises on the monthly averaged environment temperature was obtained. A system which allows for an automatic selection of the speed limit and provides automatic monitoring of the electrical energy consumption by electric vehicles was proposed in the form of local network, which works together with existing GPS system. Originality. A mathematical model for calculating the motion curves and energy consumption of electric vehicles has been developed. This model takes into account the characteristic values of the motor engine and the steering system, the change of the mass when loading or unloading passengers, the slopes and radii of the roads, the limitations given by the general traffic rules, and other factors. The dependency of the energy consumption on the averaged monthly environment temperature for public electric transport companies has been calculated. Practical value. The developed mathematical model simplifies the calculations of the traffic dynamics and energy consumption. It can be used for calculating the routing maps, for design and upgrade of the power networks, for development of the electricity saving measures. The system simplifies the work of the vehicle driver and allows reducing the energy consumption, also provides for an automatic energy cost monitoring. The calculated dependency of the energy consumption on the environment temperature may be used for an improvement of methods which regulate the work of the public electric transport companies. It has been proved that there is a possibility for reducing electrical energy consumption by 10% to 45% using the efficient motion regimes. Author’s certificate was obtained for the invention of the system for an automatic selection of the velocity regime for a public electric transport vehicle.

Purpose. Taking into account research and improvement of transport and storage processes for loading railway cars with bridge cranes the purpose of the study is the analysis of actual crane operation zones, development of simulation models of their functioning and determination of the most effective load technology. The real object of the study — the finished goods warehouse of a metallurgical enterprise — is formalized as a linear load point. Methodology. To analyse various options for the crane operation zones of the investigated object, the simulation modelling method was used. It was taken into account that each bridge crane can load railway cars, which are located in different zones of the loading track. Situations when the cranes are on the same crane ways during cargo operations and the service area of cars partially coincides were considered. Under such conditions, cranes can interfere with each other; it makes it difficult to carry out the transport-technological process of loading. Findings. A simulation model in which the service elements, which are the individual cargo packages, move along certain routes has been developed. Freight traffic volumes are set according to certain laws of random value distribution, taking into account the stochastic nature of real transport processes. A model of the linear loading point of railway cars with bridge cranes has been developed. It allows us to analyse the performance indicators of various options for assigning service areas to loading facilities. The analysis of such indicators as an average transporting time of service elements, a time percentage of cranes work and idle, time for separate movement operations of freight traffic volume is performed. Based on the developed model, a procedure has been developed to determine the most effective strategy for managing the loading point operation. The methodology, which has been tested on the example of a finished product warehouse of a metallurgical enterprise, and allows reducing the total costs in the process of rolled metal products loading has been developed. Originality. Theoretical research and improvement of the operation models of the metallurgical enterprise`s transport and storage complex due to the rational assignment of vehicle loading areas to the cranes. Practical value. The results obtained make it possible to increase the efficiency of the transport and storage complex by reducing the time spent by railway cars in the system with the rational use of loading resources.