• Energy Research
• 12. Responsible consumption close
• 9. Industry and infrastructure close
• Energies close
• Transport Research close

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emitting. The use of electric vehicles in car-sharing fleets can reduce carbon dioxide emissions from 14% to 65% compared to using cars with internal combustion engines. However, the key role during car-sharing trips is played by the driving style of the drivers, which has been omitted from the literature to date. This should be properly regulated by service providers and focus on the proper use of energy from electric vehicle batteries, especially at low temperatures. The article provides support for operators planning to modernize their fleet of vehicles and fills the research gap concerning car-sharing emissions.

A “Well-to-Propeller” Life Cycle Assessment of maritime transport was performed with a European geographical focus. Four typical types of vessels with specific operational profiles were assessed: a container vessel and a tanker (both with 2-stroke engines), a passenger roll-on/roll-off (Ro-Pax) and a cruise vessel (both with 4-stroke engines). All main engines were dual fuel operated with Heavy Fuel Oil (HFO) or Liquefied Natural Gas (LNG). Alternative onshore and offshore fuel supply chains were considered. Primary energy use and greenhouse gas emissions were assessed. Raw material extraction was found to be the most impactful life cycle stage (~90% of total energy use). Regarding greenhouse gases, liquefaction was the key issue. When transitioning from HFO to LNG, the systems were mainly influenced by a reduction in cargo capacity due to bunkering requirements and methane slip, which depends on the fuel supply chain (onshore has 64% more slip than offshore) and the engine type (4-stroke engines have 20% more slip than 2-stroke engines). The combination of alternative fuel supply chains and specific operational profiles allowed for a complete system assessment. The results demonstrated that multiple opposing drivers affect the environmental performance of maritime transport, a useful insight towards establishing emission abatement strategies.

The article pertains to the utilization of the application potential of MCDM/MCDA (Multi-Criteria Decision Making/Multi-Criteria Decision Analysis) methods in decision-making problems in the field of transport in light of sustainable development. The article consists of a theoretical and an empirical part. As part of the literature studies, a review was carried out on the latest applications of MCDM/MCDA methods for decision-making problems in the field of transport. In the empirical part, a multi-criteria analysis of the placement selection for a strip of expressway located in north-eastern Poland was carried out. For this purpose, a hybrid approach was used, consisting of three selected MCDM/MCDA methods: DEMATEL, REMBRANDT, and VIKOR. The ranking was compared with the results achieved in the EIA report of the investment and the results were obtained by using a different set of MCDM/MCDA methods that were proposed in the first part of the research, i.e., AHP, Fuzzy AHP, TOPSIS, and PROMETHEE. The performed multi-criteria analyses allowed for an eventual multi-dimensional evaluation of the most popular MCDM/MCDA methods currently applied in the field of transport.

Pollutant emissions have been a topic of interest in the last decades. Not only environmentalists but also governments are taking rapid action to reduce emissions. As one of the main contributors, the transport sector is being subjected to strict scrutiny to ensure it complies with the short and long-term regulations. The measures imposed by governments clearly involve all the stakeholders in the logistics sector, from road authorities and logistic operators to truck manufacturers. The improvement of traffic conditions is one of the perspectives in which the reduction of emissions is being addressed. Optimization of traffic flow, avoidance of unnecessary stops, control of the cruise speed, and coordination of trips in an energy-efficient way are necessary steps to remain compliant with the upcoming regulations. In this study, we have estimated the CO2 and NOx emissions in heavy-duty vehicles while traversing signalized intersections, and we examined the differences between various behavioral scenarios. We found a consistent trend indicating that avoiding a stop can potentially reduce CO2 and NOx emissions by up to 0.32kg and 1.8g, respectively. Furthermore, an upper bound for the yearly CO2 savings is provided for the case of The Netherlands. A reduction of 3.2% of the total CO2 emitted by heavy-duty vehicles is estimated. These results put traffic control in the main scene as a yet unexplored dimension to control pollutant emissions, enabling authorities to more accurately estimate cost–benefit plans for traffic control system investments.

Cities have been struggling for many years with many transport problems, including the impact of carbon monoxide emitted by vehicles on the environment, traffic jams, high energy consumption, numerous accidents or high infrastructure costs. There is also a dynamic growth of vehicles on the roads, which is why an increasing number of cities are introducing intelligent transportation systems (ITS), which is part of the concept of smart cities. This paper proposes a new matrix to assess the effects of the ITS implementation in the context of a concept Smart City, which consists of five criteria: (1) movement speed; (2) safety; (3) environmental; (4) economic; (5) satisfaction and amenities for society/passengers. In this new approach the benchmark values of the indicators assigned to the criteria are involved and, therefore, it is possible to determine the level of effectiveness of the ITS in public transport that uses low-carbon energy. This research used literature studies to establish the criteria of effectiveness of ITS as well as a case study, namely public transport that uses low-carbon energy in a Polish city, which had the largest fleet of electric buses in Poland and implements and uses an ITS. Both, the theoretical and the empirical research results demonstrate the usefulness and potency of the proposed matrix to assess the effects of the ITS implementation in cities in the context of the development of a smart city. In that way, the proposed approach may be a useful tool for measuring the effects of ITS implementation in cities.

It is, undoubtedly, a widespread belief that the electric vehicle (EV) is considered sustainable. However, in the manufacturing and retirement phases, EVs do not appear to be as sustainable as internal combustion vehicles (ICVs) and during the use phase, the pollution produced by EVs depends on the source of electricity generation to recharge the batteries. From an economic point of view, EVs do not appear to be competitive compared to ICVs either. However, current market trends push hard on battery EVs (BEV) and plug-in hybrid vehicles (PHEV). This study aims to analyze which of the possible mobility alternatives has more sense to be considered as the option with higher penetration in the future. To this end, four known mobility technologies (ICVs, PHEVs, BEVs, and hydrogen fuel cell EVs or FCEVs) are compared for a mid-size car using published data, through environmental and techno-economic criteria, by applying the analytic hierarchy process method in an objective manner on multiple scenarios. Putting all criteria together, it seems that the ICV alternative is the one receiving the best results in most of the scenarios, except in the case where the environmental criteria have the greatest weight. The BEV solution has almost always turned out to be the worst alternative, but it is the only choice we have right now.

The blending of hydrogen gas into natural gas pipelines is an effective way of achieving the goal of carbon neutrality. Due to the large differences in the calorific values of natural gas from different sources, the calorific value of natural gas after mixing with hydrogen may not meet the quality requirements of natural gas, and the quality of natural gas entering long-distance natural gas and urban gas pipelines also has different requirements. Therefore, it is necessary to study the effect of multiple gas sources and different pipe network types on the differences in the calorific values of natural gas following hydrogen admixing. In this regard, this study aimed to determine the quality requirements and proportions of hydrogen-mixed gas in natural gas pipelines at home and abroad, and systematically determined the quality requirements for natural gas entering both long-distance natural gas and urban gas pipelines in combination with national standards. Taking the real calorific values of the gas supply cycle of seven atmospheric sources as an example, the calorific and Wobbe Index values for different hydrogen admixture ratios in a one-year cycle were calculated. The results showed that under the requirement of natural gas interchangeability, there were great differences in the proportions of natural gas mixed with hydrogen from different gas sources. When determining the proportion of hydrogen mixed with natural gas, both the factors of different gas sources and the factors of the gas supply cycle should be considered.

Lithium, a silver-white alkali metal, with significantly high energy density, has been exploited for making rechargeable lithium-ion batteries (LiBs). They have become one of the main energy storage solutions in modern electric cars (EVs). Cobalt, nickel, and manganese are three other key components of LiBs that power electric vehicles (EVs). Neodymium and dysprosium, two rare earth metals, are used in the permanent magnet-based motors of EVs. The operation of EVs also requires a high amount of electricity for recharging their LiBs. Thus, the CO2 emission is reduced during the operation of an EV if the recharged electricity is generated from non-carbon sources such as hydroelectricity, solar energy, and nuclear energy. LiBs in EVs have been pushed to the limit because of their limited storage capacity and charge/discharge cycles. Batteries account for a substantial portion of the size and weight of an EV and occupy the entire chassis. Thus, future LiBs must be smaller and more powerful with extended driving ranges and short charging times. The extended range and longevity of LiBs are feasible with advances in solid-state electrolytes and robust electrode materials. Attention must also be focused on the high-cost, energy, and time-demand steps of LiB manufacturing to reduce cost and turnover time. Solid strategies are required to promote the deployment of spent LiBs for power storage, solar energy, power grids, and other stationary usages. Recycling spent LiBs will alleviate the demand for virgin lithium and 2.6 × 1011 tons of lithium in seawater is a definite asset. Nonetheless, it remains unknown whether advances in battery production technology and recycling will substantially reduce the demand for lithium and other metals beyond 2050. Technical challenges in LiB manufacturing and lithium recycling must be overcome to sustain the deployment of EVs for reducing CO2 emissions. However, potential environmental problems associated with the production and operation of EVs deserve further studies while promoting their global deployment. Moreover, the combined repurposing and remanufacturing of spent LiBs also increases the environmental benefits of EVs. EVs will be equipped with more powerful computers and reliable software to monitor and optimize the operation of LiBs.