• Energy Research
• Energy Research close
• SDSN Greece close

Three sub-areas covering a total projected area of about 14 ha in the western Chugach Mountains of southcentral Alaska were digitized and attributed by vegetation class for 1972 and 2012 from a series of orthophotos. A 1m pixel digital elevation model provided elevation, slope, and aspect (DEM variables). This file contains the DEM attributes and vegetation classification for each 1m pixel.

Fashion products made from repurposed materials (e.g., backpacks made from pineapple leaves) have become more prevalent nowadays, and their environmental sustainability is one of the core advantages. Yet, it is currently unclear how consumers respond to products made from repurposed materials. We conducted three experiments to examine the effects of three material features, namely function, sustainability, and distinguishability, on consumer preferences for fashion products made from repurposed materials. The results indicate that, when the function of repurposed materials is as good as that of conventional materials, consumers prefer a product made from repurposed materials over the same product made from conventional materials. Also, consumers in general prefer repurposed materials to be less visually distinguishable. Finally, when the sustainability of the repurposed products is emphasized, consumers appear more likely to choose products made from repurposed materials, even when these products have an inferior function. In conclusion, to promote fashion products made from repurposed materials, marketers may emphasize the function and sustainability of repurposed materials, and producers may manufacture repurposed materials that visually resemble conventional materials.

Brazil is home to the largest tracts of tropical vegetation in the world, harbouring high levels of biodiversity and carbon. Several biomass maps have been produced for Brazil, using different approaches and methods, and for different purposes. These maps have been used to estimate historic, recent, and future carbon emissions from land use change (LUC). It can be difficult to determine which map to use for what purpose. The implications of using an unsuitable map can be significant, since the maps have large differences—both in terms of total carbon storage and its spatial distribution. This dataset of aboveground carbon was created based on data from existing maps and an up-to-date LULC map. The map reflects current LULC, has high accuracy and resolution (50 m), and a national coverage. It can be a useful alternative for scientific studies and policy initiatives concerned with existing LULC and LUC outside of existing forests, especially at local scales when high resolution is necessary, and/or outside the Amazon biome. Map unit: tonnes of aboveground carbon per hectare. This dataset of aboveground carbon was created based on data from existing maps and an up-to-date LULC map. The map reflects current LULC, has high accuracy and resolution (50 m), and a national coverage. It can be a useful alternative for scientific studies and policy initiatives concerned with existing LULC and LUC outside of existing forests, especially at local scales when high resolution is necessary, and/or outside the Amazon biome. Map unit: tonnes of aboveground carbon per hectare. Data är baserade på befintliga kartor och en aktuell LULC-karta (änding av markanvändning) för bildandet av ovanjordiskt kol i Brasilien. Kartan speglar nuvarande LULC, har hög noggrannhet och upplösning (50 m) och en nationell täckning. Mer information på den engelska katalogsidan: https://snd.gu.se/en/catalogue/study/ecds0244 This dataset of aboveground carbon was created based on data from existing maps and an up-to-date LULC map. The map reflects current LULC, has high accuracy and resolution (50 m), and a national coverage. It can be a useful alternative for scientific studies and policy initiatives concerned with existing LULC and LUC outside of existing forests, especially at local scales when high resolution is necessary, and/or outside the Amazon biome. Map unit: tonnes of aboveground carbon per hectare.

The HEU MODERATE Building Stock Data provides information regarding the building stock for all EU27 member states at the national level (i.e., NUTS 0) considering 2020 as the reference year. Regarding the Service Sector, the data distinguishes the following subsectors: single-family houses, multifamily houses, and apartment blocks. Regarding the Service Sector, the data distinguishes the following subsectors: offices, trade, education, health, hotels and restaurants, and other non-residential buildings. Moreover, for each subsector, the data distinguishes the following construction periods: before 1945, 1945-1969, 1970-1979, 1980-1989, 1990-1999, 2000-2010, and 2011-2020. For each building stock subsector and construction period, the data provide information regarding total values at the national level for: - Number of buildings - Number of dwellings - Number of dwellings according to ownership (i.e., owner occupied, rented, social housing) - Number of dwellings according to occupation (i.e., occupied, vacant, secondary houses) - Total constructed area - Total heated area - Total cooled area - Total final energy consumption for space heating and domestic hot water - Total final energy consumption for space cooling Moreover, the following average values for single building characteristics are provided: - Number of floors - Volume-to-surface ratio - Vertical area - Ground area - Window surface - U-values for the different building elements (roof, walls, windows, and floors) - Useful energy demand (ued) differentiating between space heating, domestic hot water, and space cooling - Final energy consumption (fed) differentiating between space heating, domestic hot water, and space cooling Finally, the data provide information about the prevalence of: - Building materials and methodology for the different building elements (roof, walls, windows, and floors) - Different systems used for space heating, domestic hot water, and space cooling The data is provided as a `csv` file (long format with all details and data source) and as an excel file (wide format with separate sheets for each country). Data and a complete description of the available fields can be found at https://github.com/MODERATE-Project/building-stock-analysis/tree/main/T3.2-static-analysis The dataset was obtained by combining information from European and national resources and the review of scientific literature. Data gaps were subsequently filled via statistical modeling.

This publication highlights important aspects for commercial refrigeration systems, which comprise parallel compression like for example part load conditions and the reverse operation between flash gas bypass and parallel compression. A case study offers and explains possible solutions on basis of a new system design. The system, which comprises novelties with respect to the design, is installed by BITZER at its St. Marys site in Australia. The potential for an improved energy efficiency with parallel compression is shown for a state-of-the-art transcritical CO2 booster system with flash gas bypass, which is installed by BITZER at its Rottenburg site for practical training seminars since autumn 2010.

The renewable energy such as wind or solar power plays an important role in a modern power system. Due to low reliability of renewable energy source, uncertainty in a system is increasing. There are many models proposed for managing systems with renewable energy. However, these models are complicated and not computationally efficient when applied to large scale problems. In this work, we propose a stochastic model which incorporates uncertainty in renewable energy. A two-stage recourse model is used for our stochastic model with finite scenarios. Additionally, we increase a spinning reserve power of the system by adding a reserve from renewable energy. The additional reserve is computed from the expected value of renewable energy serving the system. Moreover we propose an analysis process to determine a suitable spinning reserve level once the renewable energy introduced to a conventional power system.

Modeled relative change (%) in kelp biomass, production, erosion, dislodgement, and mortality with simulated increases in temperature and significant wave height that are expected to occur in the next 10, 20, and 30 years. Also shown are modeled changes in kelp blade grazing (as proportion of blade grazed) by Lacuna vincta, and kelp blade coverage by Membranipora membranacea. Data are from simulations where temp and SWH are increased independently, and in combination. Simulations were also run with and without a sea urchin grazing front.

Demographic data for eight red coral (Corallium rubrum) populations in the NW Mediterranean Sea (Spain and France). This dataset includes colony size-based estimates of annual survival, shrinkage and fecundity rates of red coral populations subjected to different disturbances (fishing and warming) and a growth model based in coral colonies from two populations.

Local tide and wave conditions were recorded with a RBRduo TDǀwave sensor (RBR Ltd., Ontario/Canada). The sensor was bottom mounted in a shallow tidal creek (0.78 m NHN) through a steel girder (buried 0.3m deep in the sediment) and was positioned 10 cm above sediment surface, as was determined by using a portable differential GPS. This resulted in the sensor falling dry during low tide. For accurate depth calculations, raw pressure data were manually corrected for atmospheric pressure derived from a locally installed weather station. The sensor was pre-calibrated by the manufacturer and the sampling rate was 3 Hz with 1024 samples per burst at a sample interval of 10 min. Recorded data were internally logged until the readout with the Ruskin (V1.13.13) software. Date and time is given in UTC.Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, and (c) visually checks. Low-tide data is not removed, but were easily identified through the manually calculated water depth data, where all depths < 0.05m represented low tide data.

The atmosphere concentration of CO2 is steadily increasing and causing climate change. To achieve the Paris 1.5 or 2 oC target, negative emissions technologies must be deployed in addition to reducing carbon emissions. The ocean is a large carbon sink but the potential of marine primary producers to contribute to carbon neutrality remains unclear. Here we review the alterations to carbon capture and sequestration of marine primary producers (including traditional ‘blue carbon’ plants, microalgae, and macroalgae) in the Anthropocene, and, for the first time, assess and compare the potential of various marine primary producers to carbon neutrality and climate change mitigation via biogeoengineering approaches. The contributions of marine primary producers to carbon sequestration have been decreasing in the Anthropocene due to the decrease in biomass driven by direct anthropogenic activities and climate change. The potential of blue carbon plants (mangroves, saltmarshes, and seagrasses) is limited by the available areas for their revegetation. Microalgae appear to have a large potential due to their ubiquity but how to enhance their carbon sequestration efficiency is very complex and uncertain. On the other hand, macroalgae can play an essential role in mitigating climate change through extensive offshore cultivation due to higher carbon sequestration capacity and substantial available areas. This approach seems both technically and economically feasible due to the development of offshore aquaculture and a well-established market for macroalgal products. Synthesis and applications: This paper provides new insights and suggests promising directions for utilizing marine primary producers to achieve the Paris temperature target. We propose that macroalgae cultivation can play an essential role in attaining carbon neutrality and climate change mitigation, although its ecological impacts need to be assessed further. To calculate the parameters presented in Table 1, the relevant keywords "mangroves, salt marshes, macroalgae, microalgae, global area, net primary productivity, CO2 sequestration" were searched through the ISI Web of Science and Google Scholar in July 2021. Recent data published after 2010 were collected and used since area and productivity of plants change with decade. For data with limited availability, such as net primary productivity (NPP) of seagrasses and global area and NPP of wild macroalgae, data collection was extended back to 1980. Total NPP and CO2 sequestration for mangroves, salt marshes, seagrasses and wild macroalgae were obtained by the multiplication of area and NPP/CO2 sequestration density and subjected to error propagation analysis. Data were expressed as means ± standard error.