• Energy Research
• 13. Climate action close
• 15. Life on land close
• GB close
• CA close
• Energy Research close

These datasets are associated with the following paper: Metsaranta, J.M., Mamet, S.D., Maillett, J., Barr, A.G. (2021). Comparison of tree-ring and eddy covariance derived annual ecosystem production estimates for jack pine and trembling aspen forests in Saskatchewan, Canada. Agricultural and Forest Meteorology. There are two files: (1) CBMOutput.zip. This contains the hybrid biometric modelled ecosystem C stock and flux estimates. (2) StandReconstructionData.zip. This contains the field measurement data and the tree level biomass and wood volume data for the Stand Reconstruction plots used to develop the hybrid biometric modelled estimates. The data are formatted as .csv files, and an associated Microsoft Excel spreadsheet explains the data columns and provides information on the associated units of measure.

The data consists of annual measurements of standing aboveground plant biomass, annual aboveground net primary productivity and annual soil respiration between 1998 and 2012. Data were collected from seven European shrublands that were subject to the climate manipulations drought and warming. Sites were located in the United Kingdom (UK), the Netherlands (NL), Denmark ( two sites, DK-B and DK-M), Hungary (HU), Spain (SP) and Italy (IT). All field sites consisted of untreated control plots, plots where the plant canopy air is artificially warmed during night time hours, and plots where rainfall is excluded from the plots at least during the plants growing season. Standing aboveground plant biomass (grams biomass per square metre) was measured in two undisturbed areas within the plots using the pin-point method (UK, DK-M, DK-B), or along a transect (IT, SP, HU, NL). Aboveground net primary productivity was calculated from measurements of standing aboveground plant biomass estimates and litterfall measurements. Soil respiration was measured in pre-installed opaque soil collars bi-weekly, monthly, or in measurement campaigns (SP only). The datasets provided are the basis for the data analysis presented in Reinsch et al. (2017) Shrubland primary production and soil respiration diverge along European climate gradient. Scientific Reports 7:43952 https://doi.org/10.1038/srep43952 Standing biomass was measured using the non-destructive pin-point method to assess aboveground biomass. Measurements were conducted at the state of peak biomass specific for each site. Litterfall was measured annually using litterfall traps. Litter collected in the traps was dried and the weight was measured. Aboveground biomass productivity was estimated as the difference between the measured standing biomass in year x minus the standing biomass measured the previous year. Soil respiration was measured bi-weekly or monthly, or in campaigns (Spain only). It was measured on permanently installed soil collars in treatment plots. The Gaussen Index of Aridity (an index that combines information on rainfall and temperature) was calculated using mean annual precipitation, mean annual temperature. The reduction in precipitation and increase in temperature for each site was used to calculate the Gaussen Index for the climate treatments for each site. Data of standing biomass and soil respiration was provided by the site responsible. Data from all sites were collated into one data file for data analysis. A summary data set was combined with information on the Gaussen Index of Aridity Data were then exported from these Excel spreadsheet to .csv files for ingestion into the EIDC.

This dataset contains the underlying data for the following publication: Doukas, H., Spiliotis, E., Jafari, M. A., Giarola, S. & Nikas, A. (2021). Low-cost emissions cuts in container shipping: Thinking inside the box. Transportation Research Part D: Transport and Environment, 94, 102815, https://doi.org/10.1016/j.trd.2021.102815.

Project: Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets - These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. Summary: These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.CMIP.MOHC.HadGEM3-GC31-MM.historical' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The HadGEM3-GC3.1-N216ORCA025 climate model, released in 2016, includes the following components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N216; 432 x 324 longitude/latitude; 85 levels; top level 85 km), land: JULES-HadGEM3-GL7.1, ocean: NEMO-HadGEM3-GO6.0 (eORCA025 tripolar primarily 0.25 deg; 1440 x 1205 longitude/latitude; 75 levels; top grid cell 0-1 m), seaIce: CICE-HadGEM3-GSI8 (eORCA025 tripolar primarily 0.25 deg; 1440 x 1205 longitude/latitude). The model was run by the Met Office Hadley Centre, Fitzroy Road, Exeter, Devon, EX1 3PB, UK (MOHC) in native nominal resolutions: aerosol: 100 km, atmos: 100 km, land: 100 km, ocean: 25 km, seaIce: 25 km.

Tree cores were sampled using increment borers. At each site three trees were chosen for coring, with two or three cores taken per tree. Cores were sanded and ring widths measured based on high-resolution images of the sanded cores. Cores were cross-dated and summary statistics used to compare cross-dating accuracy. The dataset contains the resulting dated ring width series. This dataset includes tree ring width data, derived from tree cores, that were sampled from sites across the Rhön Biosphere Reserve (Germany). At each chosen site three trees were cored, with two or three cores taken per cored tree. Data was collected in August 2021.

As part of global efforts to reduce dependence on carbon-based energy sources there has been a rapid increase in the installation of renewable energy devices. The installation and operation of these devices can result in conflicts with wildlife. In the marine environment, mammals may avoid wind farms that are under construction or operating. Such avoidance may lead to more time spent travelling or displacement from key habitats. A paucity of data on at-sea movements of marine mammals around wind farms limits our understanding of the nature of their potential impacts. Here, we present the results of a telemetry study on harbour seals Phoca vitulina in The Wash, south-east England, an area where wind farms are being constructed using impact pile driving. We investigated whether seals avoid wind farms during operation, construction in its entirety, or during piling activity. The study was carried out using historical telemetry data collected prior to any wind farm development and telemetry data collected in 2012 during the construction of one wind farm and the operation of another. Within an operational wind farm, there was a close-to-significant increase in seal usage compared to prior to wind farm development. However, the wind farm was at the edge of a large area of increased usage, so the presence of the wind farm was unlikely to be the cause. There was no significant displacement during construction as a whole. However, during piling, seal usage (abundance) was significantly reduced up to 25 km from the piling activity; within 25 km of the centre of the wind farm, there was a 19 to 83% (95% confidence intervals) decrease in usage compared to during breaks in piling, equating to a mean estimated displacement of 440 individuals. This amounts to significant displacement starting from predicted received levels of between 166 and 178 dB re 1 μPa(p-p). Displacement was limited to piling activity; within 2 h of cessation of pile driving, seals were distributed as per the non-piling scenario. Synthesis and applications. Our spatial and temporal quantification of avoidance of wind farms by harbour seals is critical to reduce uncertainty and increase robustness in environmental impact assessments of future developments. Specifically, the results will allow policymakers to produce industry guidance on the likelihood of displacement of seals in response to pile driving; the relationship between sound levels and avoidance rates; and the duration of any avoidance, thus allowing far more accurate environmental assessments to be carried out during the consenting process. Further, our results can be used to inform mitigation strategies in terms of both the sound levels likely to cause displacement and what temporal patterns of piling would minimize the magnitude of the energetic impacts of displacement. Wash_diagWash_diag.xlsx is the historic location data (pre windfarm construction) for the 19 individuals used in the analysis described in Russell et al.

Herbivory assessments were made at the plant community and species levels. We focused on three plant species with a widespread occurrence across the temperature gradient: cuckooflower (Cardamine pratensis, Linnaeus), common mouse-ear (Cerastium fontanum, Baumgerten), and marsh violet (Viola palustris, Linnaeus). For assessments of invertebrate herbivory at the species level, thirty individuals per species of C. pratensis, C. fontanum, and V. palustris were marked in each of ten plots, using a stratified random sampling method where individuals were randomly selected, but the full range of within-plot soil temperatures was represented. For assessments of invertebrate herbivory at the community level, five 50 × 50 cm quadrats were marked at random points in eight of the plots that best captured the full temperature gradient. The community-level herbivory assessment was conducted on 19th June. The number of damaged plants was recorded out of 100 random individuals, selected using a 10 × 10 grid within each 50 × 50 cm quadrat. For the species-level herbivory assessment, individual marked plants were surveyed for signs of invertebrate herbivory every two weeks from 30th May to 2nd July, generating three time-points per species. At each survey, all marked individuals for each species were assessed within a 48-hour period. Plants were recorded as damaged or not damaged by invertebrate herbivores at each time-point. Further details of how phenological stage of development, vegetation community composition, soil temperature, moisture, pH, nitrate, ammonium, and phosphate were recorded are provided in the supporting documentation. This is a dataset of environmental data, vegetation cover, and community- and species-level invertebrate herbivory, sampled at 14 experimental soil plots in the Hengill geothermal valley, Iceland, from May to July 2017. The plots span a temperature gradient of 5-35 °C on average over the sampling period, yet they occur within 1 km of each other and have similar soil moisture, pH, nitrate, ammonium, and phosphate.

Variable list for files: SW wind - Section table on Skomer (Standardised).csv / NW wind - Section table on Skomer (Standardised).csv / SE wind - Section table on Skomer (Standardised).csv /NE wind - Section table on Skomer (Standardised).csv and SW wind - Sections on Skokholm (Standardised).csv FID: Row ID (for use in ArcGIs) Count: Number of guillemots per section Area: Total area of each section () Density: Density of guillemots per section (number of birds/ Area) X_Centre: X coordinate of the central point of each section Y_Centre: Y coordinate of the central point of each section Sector: Section ID MeanUMedian; MeanUIQR, MeanUSkewness, MeanUCV: Median, interquartile range,skewness and coefficient of variation of mean wind speed per section HorizontalMedian;HorizontalIQR,HorizontalSkewness,HorizontalCV: Median, interquartile range,skewness and coefficient of variation of horizontal wind speed per section PMedian;PIQR,PSkewness,PCV: Median, interquartile range,skewness and coefficient of variation of preessure per section TKEMedian;TKEIQR,TKESkewness,TKECV: Median, interquartile range,skewness and coefficient of variation of turbulent kinetic energy per section TIMedian;TIIQR,TISkewness,TICV: Median, interquartile range,skewness and coefficient of variation of turbulence intensity per section U_2Median;lU_2IQR;U_2Skewness;U_2CV: Median, interquartile range,skewness and coefficient of variation of vertical wind speed per section EpsilonMedian;EpsilonIQR,EpsilonSkewness,EpsilonCV: Median, interquartile range,skewness and coefficient of variation of turbulent dissipation rate per section NutMedian;NutIQR,NutSkewness,NutCV: Median, interquartile range,skewness and coefficient of variation of kinematic viscosity per section GustsMedian;GustsIQR,GustsSkewness,GustsCV: Median, interquartile range,skewness and coefficient of variation of instataneous gusts per section MeanSectorSlope: Mean slope per section ColPresence: Binomial variable, indicating whether a section has birds or not. This variable varies with classification, based on either the count of birds or the density per section Variable list for file: Section table on Skomer - with Mean cliff orientation and Slope (NOT-Standardised).csv FID: Row ID (for use in ArcGIs) Count: Number of guillemots per section Area: Total area of each section () Density: Density of guillemots per section (number of birds/ Area) X_Centre: X coordinate of the central point of each section Y_Centre: Y coordinate of the central point of each section Sector: Section ID MeanSectorSlope: Mean slope per section MeanSectorAspectCircular: Mean cliff orientation per section ApsectClass: Factor indicating whether the mean cliff orientation is lee- or windward to the SW wind ColPresence: Binomial variable, indicating whether a section has birds or not. This variable varies with classification, based on either the count of birds or the density per section Variable list for file: SW wind - Sections on Skokholm to predict colonies using cliff orientation and slope model from Skomer (NON - Standardised).csv FID: Row ID (for use in ArcGIs) Count: Number of guillemots per section Area: Total area of each section () Density: Density of guillemots per section (number of birds/ Area) Sector: Section ID MeanSectorSlope: Mean slope per section MeanSectorAspectCircular: Mean cliff orientation per section Wind is fundamentally related to shelter and flight performance: two factors that are critical for birds at their nest sites. Despite this, airflows have never been fully integrated into models of breeding habitat selection, even for well-studied seabirds. Here we use computational fluid dynamics to provide the first assessment of whether flow characteristics (including wind speed and turbulence) predict the distribution of seabird colonies, taking common guillemots (Uria aalge) breeding on Skomer island as our study system. This demonstrates that occupancy is driven by the need to shelter from both wind and rain/ wave action, rather than airflow characteristics alone. Models of airflows and cliff orientation both performed well in predicting high quality habitat in our study site, identifying 80% of colonies and 93% of avoided sites, as well as 73% of the largest colonies on a neighbouring island. This suggests generality in the mechanisms driving breeding distributions, and provides an approach for identifying habitat for seabird reintroductions considering current and projected wind speeds and directions. Methods detailed in manuscript: https://doi.org/10.1111/ecog.05733.

Data from: 30 Years Brings Changes to the Arthropod Community of Kibale National Park, Uganda by Opito, E.A., T. Alanko, U. Kalbitzer, M. Nummelin, P. Omeja, A. Valtonen, and Colin A. Chapman. 2023, Biotropica, Article DOI: 10.1111/btp.13206