• Energy Research
• Closed Access close
• Open Source close
• CN close
• CA close
• BE close
• UA close

AbstractThe presented synthesis of the title compounds (II), (IV), (VI) and (VIII) is extremely simple and highly efficient without the use of any chromatographic purification.

Abstract This paper studied the yield and release of ClO 2 from NaClO 2 under various conditions by ultraviolet–visible spectrophotometer (UV–Vis), the existing form of HA-Na under various conditions by Fourier transform infrared spectroscopy (FT-IR), and the reactivity of chlorite/humate (NaClO 2 /HA-Na) in removal of SO 2 , NO and Hg 0 under various conditions. The investigated factors included the temperature, the pH, the standing time, the coexistence gases and the anions. The results indicated that the yield and release of ClO 2 were significantly affected by the cooperative effects of pH/temperature and pH/standing time. ClO 2 was confirmed as an effective oxidant in the removal of NO and Hg 0 , and dominated the distribution of Hg 2+ in NaClO 2 and KCl. SO 2 and NO were characterized as the promoters for oxidizing Hg 0 and stabling Hg 2+ . The addition of Cl − decreased the removal efficiencies of SO 2 and NO, but slightly increased the Hg 0 removal efficiency. The best removal efficiencies of SO 2 , NO and Hg 0 were 100%, 95.3% and 100% respectively. Based on the characterization results by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and energy dispersive spectroscopy (EDS), the removal products were determined as NaCl, humic (HA), Na 2 SO 4 , NaNO 3 , HgSO 4 , Hg(NO 3 ) 2 and HgCl 2 . The reaction mechanism was proposed finally.

Mixed transition metal oxides with high theoretical capacity show great potential to replace carbonaceous anode materials in lithium-ion batteries.

The spatial orientation of optical radiation sources has long been the hot topic in the aerospace and the military applications. Current researches mainly focus on the high precision orientation on the partial field of view. Thus, combination of several partial fields of view is required to achieve orientation when the field of view exceeds 180°, which results in the increase of size, weight, power consumption and the cost. By defining radiation energy and direction of the optical radiation source as a vector and applying the cosine law of radiation and vector theorem, it is shown that the vector can be obtained from unit normal vectors on the three un-coplanar surfaces and from the energy projected by the optical radiation source. Based on this, an orientation method with 360° full field of view by a polyhedron is suggested, the mathematical formula for anti-multipath interference is supposed and the error upper limit is derived. The feasibility and effectiveness of this method are validated by measurements and simulation. An accuracy better than 2.866° and 0.574° is achieved when the ratio of measurement error of energy on arbitrary surface and the true value are 5% and 1%, respectively, given the matrix composed of unit normal vectors on three measurement surfaces is orthogonal.

New zinc phthalocyanine (ZnPc-TDA), peripherally functionalized with donor-acceptor conjugates was synthesized, and its optical, thermal, electrochemical, and photovoltaic properties were studied. The black ZnPc-TDA exhibited both excellent solubility in common organic solvents, and broad absorption covering the range 300-900 nm. The photovoltaic devices with the configuration of ITO/PEDOT-PSS/ZnPc-TDA:PCBM/LiF/Al produced short circuit current densities of 2.26 mA/cm(2), the open circuit voltage of 0.68 V and power conversion efficiency of 0.4% under AM1.5G illumination. (C) 2010 Elsevier B.V. All rights reserved.

Abstract The elemental dissolution of Cu-Zn alloys was investigated as a function of Zn content ranging from 0 to 45 wt%. Atomic emission spectroelectrochemistry (AESEC) was utilized to directly monitor Cu2+ and Zn2+ release and oxide growth as function of time during potentiodynamic experiments. It was determined that Cu dissolution undergoes a simultaneous mechanism of Cu2O formation and Cu2+ release. The addition of Zn in Cu-Zn alloy does not measurably change the dissolution mechanism of Cu2+ and the rate of aqueous Cu2+ was only dependent on the potential. Zn dissolution was however blocked by the formation of a Cu(0) film which shifted the Zn dissolution in the anodic direction.

Abstract Reversible carbonation/calcination of CaCO3 is a promising technology for thermochemical energy storage in concentrated solar power plants. However, the major drawback of this technology is the rapid deactivation of CaO due to sintering. In this study, newly developed CaCO3/graphite nanosheets composites were synthesized as the heat storage medium through a one-pot route varying the graphite nanosheets load (3–12 wt%). The impregnation of the composites with H3BO3 solutions enhance the initial weightlessness temperature of graphite nanosheets from 900 °C to 1050 °C in pure CO2 atmosphere, thus upgrading the stability of graphite nanosheets during heat storage/release process. The performances of the synthesized composites were evaluated by thermogravimetric analysis, which simulates the heat storage cycle. The composites showed improved heat storage/output capacity and faster heat input/output rate compared to pure CaCO3. Only 3 wt% of graphite nanosheets was needed to effectively stabilize the heat storage capacity of the material. The heat storage capacity of composites with 3 wt% graphite nanosheets is 1313 kJ/kgcomposite after 50 cycles, corresponding to 2.9 times as much as that of pure CaCO3. This high stability is attributed to the unique synthetic strategy in which the CaCO3 nanoparticles uniformly coated on graphite nanosheets surface, and their sintering and aggregation were prevented. This work brings the development of this technology to a level closer to its industrial application.

This paper gives a introduction of a SMES unit using 2G HTS wires. A complete SMES system including both superconducting coils and control circuit has been designed to operate at 77 K. Three single-phase H-bridge converters have been used in the control circuit. A loop control signal is sent out by using 32 fixed point Digital Signal Processor (DSP). The complete circuit has been both modelled in simulation and built experimentally. The results validate that this SMES successfully compensates a voltage sag in a power system.

The catalytic active sites of NiFe and NiFeCr (oxy)hydroxides are revealed byoperandospectroscopic techonologies for alkaline water oxidation.