• Energy Research
• Open Access close
• Restricted close
• BE close
• Hyper Article en Ligne close

The investigation of degradation of seven distinct sets (with a number of individual cells of n $ 12) of state of the art organic photovoltaic devices prepared by leading research laboratories with a combination of imaging methods is reported. All devices have been shipped to and degraded at Risø DTU up to 1830 hours in accordance with established ISOS-3 protocols under defined illumination conditions. Imaging of device function at different stages of degradation was performed by laser-beam induced current (LBIC) scanning; luminescence imaging, specifically photoluminescence (PLI) and electroluminescence (ELI); as well as by lock-in thermography (LIT). Each of the imaging techniques exhibits its specific advantages with respect to sensing certain degradation features, which will be compared and discussed here in detail. As a consequence, a combination of several imaging techniques yields very conclusive information about the degradation processes controlling device function. The large variety of device architectures in turn enables valuable progress in the proper interpretation of imaging results—hence revealing the benefits of this large scale cooperation in making a step forward in the understanding of organic solar cell aging and its interpretation by state-of-the-art imaging methods.

Biotechnology can greatly improve the efficiency of forest tree breeding for the production of biomass, energy, and materials. However, EU regulations impede the market introduction of genetically modified (GM) trees so their socioeconomic and environmental benefits are not realized. European policy makers should concentrate on a science-based regulatory process.

Over the last decades, fast response aerodynamic probes have been recognized as a robust measurement technique to provide time-resolved flow field data in turbomachinery environments. Still, most of the existing probe designs are restricted to low temperature applications (<120 °C) either because of sensor temperature range limitations or packaging issues. Measurements in turbomachines also require a small probe size often with a very high bandwidth which are conflicting constraints difficult to satisfy simultaneously. This contribution therefore presents the development of a novel miniature (∅ 2.5 mm ) high temperature single sensor total pressure probe, designed for operation up to 250 °C with a very high bandwidth of 250 kHz. The probe main element is a 1.7 mm diameter commercial piezoresistive transducer placed in a Pitot type arrangement with a flush mounted sensor to provide the highest bandwidth. The details of the probe design are presented as well as the probe calibrations in pressure and in temperature. The effects of using a thermal compensation module or a sense resistor to monitor the temperature drift are described in the context of measurement uncertainty. The probes were characterized in terms of aerodynamic characteristics versus flow angle and Mach number. Shock tube tests have shown a dynamic response of the probe with sensor resonance frequencies well over 300 kHz, with a flat frequency range up to 250 kHz. Two probe prototypes were manufactured and first used in the 3½-stage high speed axial compressor CREATE of the LMFA at École Centrale de Lyon in France. The probes were traversed at each interblade row plane up to temperatures of 180 °C and absolute pressure of 3 bars. The probe was able to resolve the high blade passing frequencies (∼16 kHz) and several harmonics including rotor-stator interaction frequencies up to 200 kHz. Besides the average total pressure distributions from the radial traverses, phase-locked averages and random unsteadiness are presented. The probe spatial and temporal resolutions are discussed in the context of those results.

Acid–base disturbances caused by environmental factors and physiological events including feeding have been well documented in several fish species, but little is known about the impact of dietary electrolyte balance (dEB). In the present study, we investigated the effect of feeding diets differing in dEB ( − 100, 200, 500 or 800 mEq/kg diet) on the growth, nutrient digestibility and energy balance of Nile tilapia. After 5 weeks on the test diet, the growth of the fish was linearly affected by the dEB levels (P< 0·001), with the lowest growth being observed in the fish fed the 800 dEB diet. The apparent digestibility coefficient (ADC) of fat was unaffected by dEB, whereas the ADC of DM and protein were curvilinearly related to the dEB levels, being lowest and highest in the 200 and 800 dEB diets, respectively. Stomach chyme pH at 3 h after feeding was linearly related to the dEB levels (P< 0·05). At the same time, blood pH of the heart (P< 0·05) and caudal vein (P< 0·01) was curvilinearly related to the dEB levels, suggesting the influence of dEB on postprandial metabolic alkalosis. Consequently, maintenance energy expenditure (MEm) was curvilinearly related to the dEB levels (P< 0·001), being 54 % higher in the 800 dEB group (88 kJ/kg0·8per d) than in the 200 dEB group (57 kJ/kg0·8per d). These results suggest that varying dEB levels in a diet have both positive and negative effects on fish. On the one hand, they improve nutrient digestibility; on the other hand, they challenge the acid–base homeostasis (pH) of fish, causing an increase in MEm, and thereby reduce the energy required for growth.

This paper investigates how different social and environmental reporting (SER) practices arise in the context of the emerging sustainability logic. Based on interview evidence gathered in 14 Belgian listed companies with various SER practices, ranging from non-disclosure to substantive reporting, we observe that the degree of development of symbolic and material insensitivity to the prevailing profit-maximizing logic determines the format of the SER practice. More specifically, we find that the presence of either symbolic or material resistance to the emerging sustainability logic can explain the complete absence of SER.