• Energy Research
• engineering and technology close
• CN close
• FR close
• DK close
• ID close

The effect of the combined application of nano-hydroxyapatite (NHAP) or nano-carbon black (NCB) on the phytoextraction of Pb by ryegrass was investigated as an enhanced remediation technique for soils by field-scale experiment. After the addition of 0.2% NHAP or NCB to the soil, temporal variation of the uptake of Pb in aboveground parts and roots were observed. Ryegrass shoot concentrations of Pb were lower with nano-materials application than without nano-materials for the first month. However, the shoot concentrations of Pb were significantly increased with nano-materials application, in particular NHAP groups. The ryegrass root concentrations of Pb were lower with nano-materials application for the first month. These results indicated that nano-materials had significant effects on stabilization of lead, especially at the beginning of the experiment. Along with the experimental proceeding, phytotoxicity was alleviated after the incorporation of nano-materials. The ryegrass biomass was significantly higher with nano-materials application. Consequently, the Pb phytoextraction potential of ryegrass significantly increased with nano-materials application compared to the gounps without nano-materials application. The total removal rates of soil Pb were higher after combined application of NHAP than NCB. NHAP is more suitable than NCB for in-situ remediation of Pb-contaminated soils. The ryegrass translocation factor exhibited a marked increase with time. It was thought that the major role of NHP and NBA might be to alleviate the Pb phytotoxicity and increase biomass of plants.

Plug-in hybrid electric vehicles (PHEVs) have a larger battery and can replace a certain amount of conventional fossil fuels with grid electricity, which differs from the traditional hybrid electric vehicles (HEVs). The application of the onboard electrical energy significantly influences the energy utilization efficiency and thus impacts the fuel economy. In this paper, the basic PHEV operation modes are defined as pure electric driving (PED), hybrid driving charge depleting (HDCD) and hybrid driving charge sustaining (HDCS) based on the battery state of charge (SoC) profile. For a plug-in hybrid electric bus (PHEB), three different energy management strategies, which are combined with two or three of the basic operation modes, are put forward and comparatively examined based on simulation models. If some trip information can be approximately known in advance such as the trip distance and the mean power demand, the PED + HDCD + HDCS strategy comprised optimally of the PED mode, the HDCD mode and the HDCS mode would be the best energy management strategy.

A transition from fossil to renewable energy requires the development of sustainable electric energy storage systems capable to accommodate an increasing amount of energy, at larger power and for a longer time. Flow batteries are seen as one promising technology to face this challenge. As different innovations in this field of technology are still under development, reproducible, comparable and verifiable life cycle assessment studies are crucial to providing clear evidence on the sustainability of different flow battery systems. Based on a review of 20 relevant life cycle assessment studies for different flow battery systems, published between 1999 and 2021, this contribution explored relevant methodological choices regarding the sequence of phases defined in the ISO 14,040 series: goal and scope definition, inventory analysis, impact assessment and interpretation. Inspired by good practice examples, common gaps and weaknesses were identified and recommendations for comparative life cycle assessment studies were derived. This includes suggestions for an expanded functional unit definition, a provision of more detailed and transparent reporting of LCI data while using input/output tables. Outcomes of this study are also of relevance for the amendment of the Batteries Directive 2006/66/EC, where first drafts are under revision in the European Council, including the introduction of a battery passport, which should encourage battery producers to reduce their carbon footprint and avoid problematic materials.

Crop cultivation in greenhouses under semi-arid climatic conditions is subject to various stresses, in particular during the winter season at night, when the interior air is poorly controlled, leading to prolonged periods of low temperature. The aim is then to evaluate and control the heat exchanges of the enclosure in order to prevent low indoor air temperatures and reduce the thermal load of the greenhouse. The objectives of this study are to investigate the convective and radiative heat exchanges at the cover in order to establish new correlations for the convective heat transfer coefficients in semi arid regions. The climatic parameters were measured inside and outside a closed empty glasshouse without crop, for three different nights during the winter season in the semi-arid land of Algeria. A physical model for analysing the convective heat transfers was implemented, and new correlations were established, parameterised, calibrated and validated thoroughly. A significant difference was observed between the correlations obtained by this study and the models obtained for other greenhouse designs under different climatic conditions. Results show that the convection mode along the inside wall of the cover is free turbulent. Conversely, the convection mode along the outside greenhouse cover remains forced turbulent. A consistent performance of the correlations was observed, both in the calibration and validation stages.

This paper concerns on process evaluation and modification for bioethanol separation and production by applying pinch technology. Further, the paper is also focused on obtaining a most energy-efficient process among several processes. Three basic process configurations of bioethanol separation and production were selected for this study. The three separations and production systems are Othmer process, Barbet process and a separation process that operates under vacuum condition. Basically, each process is combination of Danish Distilleries process with a separation system yielding 95% (v/v) bioethanol. The production capacity of the plant is estimated about 4 x 107 litre of bioethanol 95% (v/v) per year. The result of the studies shows that the most energy efficient process among the three processes evaluated is the Othmer process, followed by the Barbet process and the process involving vacuum operation. The evaluation also shows that further energy saving can be carried for Barbet and Othmer process configuration when Tmin = 10oC for heat exchange possible.

Abstract The improvement of thermodynamic efficiency of power plants is of great interest for the whole energy industry. The use of Kalina cycle has a great potential to improve the thermal efficiency of a nuclear power plant. This cycle uses a mixture of ammonia and water as working fluid. In this paper, we discuss the development of an Ammonia-Water mixture Property Code (AWProC). The estimation of the mixture properties are based on the Gibbs free energy functions. The code is verified and validated against experimental data available in the literature and REFPROP code. It is shown that AWProC can accurately estimate the thermodynamic properties of ammonia-water mixtures over a wide range of conditions, including high temperature and pressure regions. The code is then used to investigate the feasibility of applying the Kalina cycle to a typical Pressurizer Water Reactor (PWR) plant as an effective way to improve the plant efficiency. The fundamental of Basic-Kalina (B-K) cycle is described in detail firstly. Then, two modified configurations, Recuperation-Kalina (R-K) and Flash-Kalina (F-K) cycles respectively, are proposed for a typical 1000 MWe PWR. The simulation results indicate that the R-K type cycle can reach about 31.2% efficiency with simple equipment requirements, while the F-K type cycle can reach efficiencies up to about 34.8%, but at the expenses of a slightly more complex design. The present work demonstrates the applicability of the Kalina cycle as a way to improve the thermal efficiency of a nuclear power plant. This concept is meaningful for improving nuclear power plants economic and competitiveness.