• Energy Research
• 7. Clean energy close
• CN close
• IN close
• BE close

Abstract Gold nanoparticles (Au-NPs) seeded plasmonic nanofluids (PNFs) have shown promising results in overall performance enhancement of direct absorption solar collector (DASC) due to localized surface plasmon resonance (LSPR) effect. For the work presented here, Au-NPs were synthesized by the wet chemical method and were utilized to prepare plasmonic nanofluid. The surface plasmon resonance peak of Au-NPs was observed at 531 nm using UV–Visible spectrophotometer study. The testing for performance enhancement of gold plasmonic nanofluid (GPNF) laden DASC so far is limited to laboratory scale setups or simulation studies. Considering the dearth of outdoor experimental studies, an attempt has been made in the present study to evaluate the thermal performance of Au-NPs (∼40 nm) based nanofluid (∼0.0002 wt%) in full scale DASC. The experiments have been performed at different flow rates under clear sky outdoor conditions in winter season at Jalandhar, India. The maximum collector outlet temperature was measured to be 55 °C with GPNF which is about 7 °C higher than the maximum outlet temperature obtained with de-ionized water as working fluid. Thermal efficiency with GPNF is about 33% higher than de-ionized water at the optimal flow rate of 0.030 kg/s.

LoRA stands for Long Range communication. Lo-RAwan is the specification used for the battery operated and wireless systems. The main aim of the LoRA is to target the Internet Of Things requirement and also Bidirectional communication. In order to prove the proof of concept, here we are creating a smart prepaid electric meter which will consist of lora module along with it. All the data related to the meters i.e voltage, energy power etc will be send to a gateway. Gateway is the central unit or router which collects all the data from all the meters and it is connected with the local storage device or PC which will create the database for all the data, Now this data is again uploaded to the cloud by this pc to the public network, which can be accessed from any of the place. The most important part of this is that this concept of communication can be extended to other application in which the data transmitted bits is less. As a result of this we can overcome the disadvantage of the 3G/4G GSM modules and low power WAN i.e. LORA can be used for communication.

In this paper, we investigate the energy harvesting (EH) technique and accordingly design transceivers for a $K$ link multiple-input multiple-output interference channel. Each link consists of two full-duplex (FD) Internet of Things (IoT) nodes exchanging information simultaneously in a bi-directional communication channel. All the nodes suffer from interference, in particular strong self-interference and inter-node interference, due to operating in FD mode and simultaneous transmission at each link, respectively. Further, we divide the received signal at each node into two parts. While one part of the signal is used for information decoding, the other part is used for EH. We jointly design the transmit and receive beamforming vectors and receiver power splitting ratios by minimizing the total transmission power of the system, subject to both signal-to-interference-plus-noise ratio and EH threshold constraints. Furthermore, the case of multiple-input single-output interference channel is also included for the sake of comparison. We also revisit the above problems for the case when the available channel state information (CSI) at the transmitters is imperfect, where the errors of the CSI are assumed to be norm bounded. Simulation results show that the EH technique can harvest enough energy to support power consumption limited IoT devices by aiding in recharging their respective batteries.

The accelerator-driven sub-critical system is driven by external neutron sources, which are generated by the spallation reaction and maintain the stable operation of the sub-critical core, while the external neutron source increases the complexity of reactor neutron kinetic processes. This article focuses on simulation analysis of neutron space–time kinetics with a dynamic analysis code, which is developed based on the improved quasi-static approximation and Monte Carlo neutron transport method. The amplitude function and shape functions are solved to achieve the dynamics simulation process. Then, the transient responses of beam interruptions and reactivity insertions are calculated and analyzed for an experimental facility. To further verify the correctness and reliability of dynamic behavior, the simulation results are compared with experimental values, and the results show that the normalized neutron fluxes varying with time are in good agreement with the corresponding values. It can be concluded that the improved quasi-static coupled probability theory method can be used to solve the neutron space–time kinetic problem of the experimental facility, and the results are reliable.

In this study, the hybrid power system of the diesel, as the main power source, and new energy, as the auxiliary energy is developed. An optimal energy management strategy was proposed for the hybrid ship, aiming to minimize consumption of the fuel. The model of the hybrid power system was established in the MATLAB/SIMULINK simulation environment. The optimal energy management strategy was verified by simulation according to the typical drive cycle of ship compared to original energy management strategy. The simulation results show that the proposed optimization can improve fuel economy while the state of charge of the battery is maintained at reasonable range.

Spinel LiNi0.5Mn1.5O4 as one of the high-energy positive electrode materials for next generation Li-ion batteries has attracted significant interest due to its economic and environmental advantages. However, the sensitivity of this type of material upon short to long term ambient storage conditions and the impact on the electrochemical performances remains poorly explored. Nevertheless, this remains an important aspect for practical large-scale synthesis, storage and utilization. Herein, we study and compare the evolution of surface chemistry, bulk crystal structure and elemental content evolution and distribution of LiNi0.5Mn1.5O4 using a variety of characterization techniques including XPS and STEM-EDS-EELS, as well as electrochemical analysis. We show that Mn species dominate the outer surface (0–5 nm), while Ni and Li are preferentially located further away and in the bulk. The studied LiNi0.5Mn1.5O4 material is found to be stable, with minor changes in surface or bulk characteristics detected, even after 12 months of storage under ambient air conditions. The low surface reactivity to air also accounts for the minor changes to the electrochemical performance of the air-exposed LiNi0.5Mn1.5O4, compared to the pristine material. This study provides guidance for the appropriate storage, handling and processing of this high-performance cathode material.

Ultrafast laser-annealing technique for the fabrication of large-grain perovskite films and efficient perovskite solar cells at room temperature.

The pyrolysis of waste disposable paper cups (WDPCs) was investigated using a thermogravimetric analyser coupled with a Fourier transform infrared spectrometer. The activation energies of the pyrolysis reactions were obtained by the Flynn–Wall–Ozawa (FWO) and Kissinger–Akahira–Sunose (KAS) methods respectively. The kinetic model was determined by the master plots method. Thermogravimetric results showed that the highest weight loss rate occurred from 345 to 365 °C as the heating rate was increased from 10 to 30 °C min−1, indicating the pyrolysis of cellulosic material in the WDPC. The weight loss between 400 and 500 °C can be attributed to the decomposition of polyethylene. By analysing the FTIR spectra, it was found that the absorbance of all the evolved gaseous products had peaks at 360 °C due to the decomposition of cellulose fibres and the cracking of polyethylene at 485 °C led to the emergence of a second hydrocarbon peak. Ketones were the most abundant condensable organic products and CO2 was the dominating gaseous product, which can also be produced via secondary cracking of the small molecule organics above 400 °C. Kinetic analysis revealed that the average activation energy of the pyrolysis of the WDPC was 153.75 kJ mol−1 from the FWO method and 151.43 kJ mol−1 from the KAS method. The reaction mechanism can be described by the R3 model.

Microbial fuel cells (MFCs) can potentially be utilized for power generation, but their low power density and low energy storage capabilities remain major bottlenecks for their large-scale development. In this research, a simplistic nitrogen-doped hierarchically porous carbon material (HPC-A) was developed through a one-step carbonization and activation process and was successfully hot-pressed on the carbon cloth (CC) substrate. This process fabricates capacitive bioanodes (HPC-A-CC) that can enhance electricity generation and storage in MFCs. The as-prepared HPC-A-CC anode delivered a power density of 2043.6 mW·m-2 and a cumulative total charge (Qm) of 426.4 ± 13.4C·m-2 at each cycle, which was 2.1 and 34.8 times higher than that of the plain CC anode, respectively. This was a result of the hierarchical and interconnected porous structure, improved hydrophilic surface, and increased number of active centers which host the bacteria for enhanced electron transfer. Electrochemical measurements indicated the superior electrochemical activity and capacitive behavior of the HPC-A-CC anode. Furthermore, biofilm analysis revealed that the HPC-A-CC biofilm exhibited higher cell viability and a more uniform spatial distribution. These findings not only demonstrate the potential of HPC-A-CC for power enhancement in MFCs but also provide a feasible solution to the problem of power generation and demand mismatch in MFC applications.

AbstractThis paper proposes a methodology to assess the wind risk of electrical transmission towers considering the coupling of the tower with the cables and a failure mechanism based on capacity. ...