• Energy Research
• 8. Economic growth close
• CN close
• JP close
• Energies close

As a relatively mature technology, biomass molded fuel (BMF) is widely used in distributed and centralized heating in China and has received considerable government attention. Although many BFM incentive policies have been developed, decreased domestic traditional fuel prices in China have caused BMF to lose its economic viability and new policy recommendations are needed to stimulate this industry. The present study built a regionalized net present value (NPV) model based on real production process simulation to test the impacts of each policy factor. The calculations showed that BMF production costs vary remarkably between regions, with the cost of agricultural briquette fuel (ABF) ranging from 86 US dollar per metric ton (USD/t) to 110 (USD/t), while that of woody pellet fuel (WPF) varies from 122 USD/t to 154 USD/t. The largest part of BMF’s cost composition is feedstock, which accounts for up 50%–60% of the total; accordingly a feedstock subsidy is the most effective policy factor, but in consideration of policy implementation, it would be better to use a production subsidy. For ABF, the optimal product subsidy varies from 26 USD/t to 57 USD/t among different regions of China, while for WPF, the range is 36 USD/t to 75 USD/t. Based on the data, a regional BMF development strategy is also proposed in this study.

In this study, our aim was to explore the potential energy savings obtainable from the recycling of 1 tonne of Construction and Demolition Waste (C&DW) generated in the Metropolitan City of Naples. The main fraction composing the functional unit are mixed C&DW, soil and stones, concrete, iron, steel and aluminium. The results evidence that the recycling option for the C&DW is better than landfilling as well as that the production of recycled aggregates is environmentally sustainable since the induced energy and environmental impacts are lower than the avoided energy and environmental impacts in the life cycle of recycled aggregates. This LCA study shows that the transition to the Circular Economy offers many opportunities for improving the energy and environmental performances of the construction sector in the life cycle of construction materials by means of internal recycling strategies (recycling C&DW into recycled aggregates, recycled steel, iron and aluminum) as well as external recycling by using input of other sectors (agri-food by-products) for the manufacturing of construction materials. In this way, the C&D sector also contributes to realizing the energy and bioeconomy transition by disentangling itself from fossil fuel dependence.

Environmental pollution damages public health and affects economic development. Environmental regulation is the main way for the government to solve environmental pollution. So what type of environmental regulation works better for public health and economic development? Can environmental regulation have an influence on economic development through public health? To solve these problems, this research uses China’s provincial panel data from 2013 to 2017 to divide environmental regulation into command-control policy tools and economic incentive policy tools and uses the mediating effect model to examine the relationship among environmental regulation, public health and economic development. The results show that: (1) There is a positive correlation between economic incentive policy tools and economic development; while no significant relationship between command-control policy tools and economic development is founded; (2) The relationship between command-control policy tools and public health is not significant, while the relationship between economic incentive policy tools and public health is positive; (3) Public health does not play a mediating role between command-control policy tools and economic development but plays a partial mediating role between economic incentive policy tools and economic development. Therefore, the government should strengthen the use of economic incentive policy tools to promote public health and sustainable economic development.

China is a large agricultural country with a high level of agricultural carbon emissions. Whether market prices can be used in agricultural production as a means of agricultural carbon emissions reduction is of great significance to improve the allocation of agricultural production factors and expand large-scale production. This paper applies an autoregressive distributed lag–pooled mean group(ARDL–PMG) model to evaluate the relationship between agricultural production factor prices, food consumption prices, and agricultural carbon emissions, using Chinese provincial panel data from 1994 to 2018. The results show that agricultural carbon emissions and agricultural production factor prices show environmental Kuznets curve (EKC) characteristics; agricultural carbon emissions and food prices show a U-shaped curve; and agricultural production factors are positively correlated with food price in both directions in the long-term. The results of Granger causality tests show that price is the cause of agricultural carbon emissions; the price of agricultural production factors and the price of food consumption are mutually causal. Such results have implications for price, agriculture, and environmental policies. The analysis implies that the market price can be applied to agricultural carbon reduction, which will help policymakers to implement effective price policies in order to reduce agricultural carbon emissions. One implication is that promoting the marketization of agricultural production factors and reducing price distortions will be conducive to carbon emissions reduction in agriculture, which in turn will increase food consumption prices. Therefore, subsidies are needed at the consumption end, which will eventually achieve further carbon emissions reduction at the production and consumption ends.

Because of their low flexibility, traditional vibration sensors cannot perform arbitrary bending adjustments when facing curved surfaces and other complex working conditions during the drilling process; therefore, this research proposes a ring-shaped vibration sensor (RSV−TENG) that can deform freely in the bending direction, and which can be used in working conditions where the inner bending angle of the drill pipe changes greatly. Test results show that the vibration frequency measurement range is from 4 Hz to 16 Hz, with a measurement error less than 4%, the vibration amplitude measurement range is less than 20 mm, with a measurement error less than 5%, the output voltage and current signal are 120 V and 60 nA, respectively, when three RSV−TENGs are connected in parallel, and the maximum output power is 6 × 10−7 W when the external resistance is 106 Ω. Compared with traditional downhole sensors, this sensor has self-powered and self-sensing functions, eliminating the shortcomings of battery and cable power supply; in addition, this sensor can be installed in the drill pipe space with different curvature radii, so it is more suited to complex and changeable downhole working conditions.

The existing building stock faces the challenge of low energy efficiency and requires renovation and upgrading to meet society′s goals of carbon reduction and sustainable development. This study presents an optimization framework utilizing genetic algorithms to develop robust retrofit plans that balance the need for improved energy efficiency, cost-effectiveness considerations for householders, and uncertainties regarding climate conditions. A case study of an aged residential building in a hot and humid region of China is used to demonstrate the proposed method. The optimization results show a potential energy demand reduction of 81.5%. However, due to the relatively long time required to realize economic benefits from high investments, short-term optimization tends to favor solutions with high energy demand and low primary costs. To effectively reduce carbon emissions, it is recommended to consider the long-term economic benefits of retrofits and prioritize solutions with high energy efficiency. However, it is important to acknowledge that the expensive nature of retrofit investments may pose barriers to residents. Society should provide adequate support and guidance to facilitate residential renovation efforts.

To study the emission reduction policies’ impact on the production and economic level of the steel industry, this paper constructs a two-stage dynamic game model and analyzes various emission reduction policies’ impact on the steel industry and enterprises. New results are observed in the study: (1) With the increasing emission reduction target (15%–30%) and carbon quota trading price (12.65–137.59 Yuan), social welfare and producer surplus show an increasing trend and emission macro losses show a decreasing trend. (2) Enterprises’ reduction ranges in northwestern and southwestern regions are much higher than that of the other regions; the northeastern enterprise has the smallest reductions range. (3) When the market is balanced (0.8543–0.9320 billion tons), the steel output has decreased and the polarization in various regions has been alleviated to some extent. The model is the abstraction and assumption of reality, which makes the results have some deviations. However, these will provide references to formulate reasonable emissions reduction and production targets. In addition, the government needs to consider the whole and regional balance and carbon trading benchmark value when deciding the implementation of a single or mixed policy. Future research will be more closely linked to national policies and gradually extended to other high-energy industries.

In recent years, due to the rise in energy prices and the impact of COVID-19, energy shortages have led to unsafe power supply environments. High emissions industries which account for more than 58% of the carbon emissions of Guangdong Province have played an important role in achieving the carbon peak goal, alleviating social energy shortage and promoting economic growth. Controlling high emissions industries will help to adjust the industrial structure and increase renewable energy investment. Therefore, it is necessary to comprehensively evaluate the policies of energy security and the investments of high emission industries. This paper builds the ICEEH-GD (comprehensive assessment model of climate, economy, environment and health of Guangdong Province) model, designs the Energy Security scenario (ES), the Restrict High Carbon Emission Sector scenario (RHS) and the Comprehensive Policy scenario (CP), and studies the impact of limiting high emissions industries and renewable energy policies on the transformation of investment structure, macro-economy and society. The results show that under the Energy Security scenario (ES), carbon emissions will peak in 2029, with a peak of 681 million tons. Under the condition of ensuring energy security, the installed capacity of coal-fired power generation will remain unchanged from 2025 to 2035. Under the Restrict High Carbon Emission Sector scenario (RHS), the GDP will increase by 8 billion yuan compared with the ES scenario by 2035. At the same time, it can promote the whole society to increase 10,500 employment opportunities, and more investment will flow to the low emissions industries. In the Comprehensive Policy scenario (CP), although the GDP loss will reach 33 billion yuan by 2035 compared with the Energy Security scenario (ES), the transportation and service industries will participate in carbon trading by optimizing the distribution of carbon restrictions in the whole society, which will reduce the carbon cost of the whole society by more than 48%, and promote the employment growth of 104,000 people through industrial structure optimization. Therefore, the power sector should increase investment in renewable energy to ensure energy security, limit the new production capacity of high emissions industries such as cement, steel and ceramics, and increase the green transition and efficiency improvement of existing high emissions industries.