• Energy Research
• 7. Clean energy close
• 13. Climate action close
• CN close
• JP close
• Research Papers in Economics close

Various recently proposed biomass fuels are reviewed from the point of view of their safety. Many biomass materials are proposed for use as fuels, such as refuse derived fuel (RDF), wood chips, coal-wood mixtures, etc. However, these fuels have high energy potentials and can cause fires and explosions. We have experienced many such incidents. It is very difficult to extinguish fires in huge piles of biomass fuel or storage facilities. Here current studies on heat generation for these materials and proposed evaluation methods for these new developing materials in Japan are introduced, which are consistent with measurements using highly sensitive calorimeters such as C80, or TAM, and gas emission tests. The highly sensitive calorimeters can detect small heat generation between room temperature and 80 °C, due to fermentation or other causes. This heat generation sometimes initiates real fires, and also produces combustible gases which can explode if fuel is stored in silos or indoor storage facilities.

Economics Working Paper Series, 13/183

Water resources have uneven distributions over time, space, and source; thus, potential impacts related to water use should be evaluated by determining the differences in water resources rather than by simply summing water use. We propose a model for weighting renewable water resources and present a case study assessing water scarcity footprints as indicators of the potential impacts of water use based on a life cycle impact assessment (LCIA). We assumed that the potential impact of a unit amount of water used is proportional to the land area or time required to obtain a unit of water from each water source. The water unavailability factor (fwua) was defined using a global hydrological modeling system with a global resolution of 0.5 × 0.5 degrees. This model can address the differences in water sources using an adjustable reference volume and temporal and spatial resolutions based on the flexible demands of users. The global virtual water flows were characterized using the fwua for each water source. Although nonrenewable and nonlocal blue water constituted only 3.8% of the total flow of the water footprint inventory, this increased to 29.7% of the total flow of the water scarcity footprint. We can estimate the potential impacts of water use that can be instinctively understood using fwua.

The in-service Hakka rammed earth buildings, in the Fujian Province of China, are unique in design and performance. Their UNESCO’s inscription as World Heritage sites recognizes their artistic, cultural, social and historic significance. Sponsored by the National Science Foundation of the United States, the authors have examined the engineering values of these buildings in terms of comfortable living at low energy consumption, sustainability and durability. The objective of this study was to better understand the thermo-mechanical and aging responses of Hakka earth buildings under thermal and earthquake loads through nondestructive field evaluation, including full-scale roof truss and floor testing, laboratory testing of field samples and finite element modeling. This paper presents our observations and findings from the field nondestructive evaluations with emphasis on the integrity of the rammed earth outer walls and inner wood structures, as well as the thermal comfort of living in these buildings, while a second paper presents the results from the material characterization of field samples and the structural responses of a representative building under earthquake induced loads through finite element analysis.

In earlier works by the present authors, two systems for sustainable energy were proposed: (i) a system for urban snow removal in winter and storage for air conditioning in summer, applied to Nagaoka City, which suffers heavy snow fall every winter, and (ii) a district cooling system utilizing latent heat of ice to reduce the size of storage reservoir and transportation pipeline system. In these systems, the hydraulic conveying of snow or ice through pump-and-pipeline is the key technique to be developed, since characteristics of snow (ice)/ water slurry is largely different from those of conventional non-cohesive solid particle slurries. In this study, the blocking of pipeline of snow/water slurry is investigated experimentally. While the blocking of conventional slurry occurs due to deposition of heavy particles at low flow velocity or arching of large rigid particles, that of snow/water slurry is caused by a compressed plug of snow formed due to cohesive nature of snow particles. This is because the strength of snow plug formed at a high resistance piping element, such as an orifice, becomes higher when the compression velocity is lower, resulting in a solid-like plug filling the whole channel upstream the element.

Due to advantages such as high energy density, high power density, rapid charge and discharge, high cyclic-life, and environmentally friendly, flywheel energy storage systems (FESs) are widely used in various fields. However, the performance of FES systems depends on the performance of a high speed machine, therefore, the design and optimization of a high efficiency and high power density machine are very crucial to improve the performance of the whole FES system. In this paper, a high speed permanent-magnet synchronous machine (PMSM) is researched. Considering the requirement of low torque ripple in low speed and loss caused by back electromotive force (EMF) harmonics, the electromagnetic performance is improved from points of view of slot/pole matching, magnetic-pole embrace with the finite element method (FEM). Furthermore, the magnetic-pole eccentricity, the slot opening, the thickness of PM and air-gap length are also optimized with Taguchi method. The electromagnetic performance, such as torque ripple, cogging torque, average torque and back EMF wave are much improved after optimization. Finally, experiments are carried out to verify the calculated results.

Abstract China's iron and steel sector is the largest in the world and has been the backbone of Chinese heavy industry. This sector is also a major consumer of energy and, in particular, coal. As a result, the iron and steel sector in China is a major contributor to greenhouse gas emissions and other pollutants. In this paper we examine the potential for inter-fuel substitution between coal, electricity, natural gas and oil in the Chinese iron and steel sector and find that these energy inputs are substitutes. The finding that these alternative energy sources are substitutes for coal suggests that China has the potential to switch from coal to cleaner energy sources; hence, retaining the ability to fuel its iron and steel sector, while reducing the adverse environmental implications.