• Energy Research
• Restricted close
• Open Source close
• 13. Climate action close
• 1. No poverty close
• US close
• CN close
• CA close
• AU close

Abstract This work assesses the impacts of aggressive driving behavior on pollutants emissions and energy consumption at a city level. Furthermore, it performs an economic analysis considering the potential avoided emissions and fuel savings and discusses potential policy measures to address this topic. The results showed that aggressive driving significantly impacts energy consumption and emissions, with energy consumption increasing by more than ∼200% and emissions by 330% for aggressive driving compared to non-aggressive driving (in MJ/km and in g/km, respectively). This increment was found to be even higher for diesel vehicles than for gasoline vehicles. On the contrary, gasoline vehicles showed higher percentages of increase for most emissions (CO, NOx and NO). Results also revealed that aggressive driving impacts are higher for local streets when examining the city level. Moreover, the economic analysis showed that significant cost reductions may be achieved by avoiding aggressive driving, reaching up to 52.5 k€ on a daily basis. In conclusion, this study is of particular relevance to policy makers and urban planners, enabling to obtain a comprehensive overview of the impacts of aggressive driving behaviors at a city level and providing new insights to perform further developments and to assess the feasibility of the implementation of policy measures.

In this study, air concentrations of BaP in two different seasons (winter 2015 and summer 2016) and BaP levels in ground vegetation from Tarragona County were used as control simulations performed with the WRF-CHIMERE air quality modelling system, in order to reproduce the incidence of that hazardous chemical in air and soils. The CTM was validated for the present climatology, showing a good ability to represent air and soil concentrations of BaP over the target domain (petrochemical, chemical, urban and background sites), particularly in the winter. Then, the variation of the BaP concentrations in air and soils were simulated for the time series 1996-2015 and for the climate change scenario RCP8.5 (2031-2050). While an increase is projected for the levels in air, particularly in chemical and remote sites where the variation can go up to 10%, in terms of soil deposition the findings are the opposite, with an evident decrease in soil BaP concentrations, particularly for background sites. Finally, a potential health effect of BaP for the local population (lung cancer) was assessed. Although according to the projections the EU threshold for BaP atmospheric incidence (1 ng m-3) will not be reached by 2050, there will be an increase in the life-time risk of lung cancer, particularly in the most populated areas within the simulation domain.

Alternative fuels and energy vectors are becoming increasingly important in terms of technical, geopolitical, economic, and environmental aspects. In particular, gaseous fuels and vectors, such as fossil or synthetic natural gas (NG) blended with hydrogen, commonly help provide optimal strategies to reduce global and toxic emissions of internal combustion engines, owing to their adaptability, anti-knock capacity, lower toxicity of pollutants, reduced CO2 emissions, and costeffectiveness. However, diesel engines still represent the reference category among internal combustion engines in terms of maximum thermodynamic efficiency. The possibility offered by dual-fuel (DF) systems to combine the efficiency and performance of diesel engines with the environmental advantages of gaseous fuels has been the subject of extensive investigations. However, the simple replacement of diesel fuel with gaseous fuel does not allow for optimising the engine performance, owing to the high percentage of unburned gaseous fuel, which compromises the potential reduction of CO2; therefore, more complex combustion strategies should be realised. In this study, with the aim of improving the DF combustion process, an experimental investigation was performed to analyse low-temperature combustion (LTC), using NG and two enriched hydrogen-compressed NG blends as primary fuels. The LTC mode was activated by means of a very early advanced pilot injection and carried out in two close steps. The double pilot injection was used to control the energy release rate in the first combustion stage, thereby minimizing the increase of the rate of pressure and allowing the extension of the operation range under LTC. The experimental activity was also focused on analysing the particle emissions, as it is well known that these emissions, together with those of nitrogen oxide, constitute the main pollutants resulting from diesel fuel combustion. The results demonstrated the potential to reduce the unburned fuel, NOx, and particle emissions simultaneously, while maintaining equivalent CO2 emissions to a diesel-only engine. Both the timing and pressure of the pilot injection proved to be critical parameters for optimising the emissions and performance

Clean combustion technologies, based on reactant dilution, have shown very peculiar and innovative characteristics. Reduction of light and noise emission and uniformity of temperature and composition distribution inside the combustion chamber, related to an extension of the reaction zone, make these processes very promising in several technological fields. Analysis of combustion in very diluted conditions is needed for a general understanding of these processes, which remain unknown from many aspects. The study is also useful for the identification of practical constraints which define the most suitable reactor configurations and working parameters for process reliability. The present work deals with a theoretical analysis of methane oxidation in diluted conditions using one of the detailed kinetic schemes available in the literature. A well-stirred reactor (WSR) configuration has been considered as a first attempt of process schematization. This choice is consistent with the experimental characterization of the flameless combustion processes. The influence of residence time, C/O ratio, and inlet temperature on the steady state was studied for an oxygen molar fraction (0.05), chosen as representative of flameless combustion processes. It has been pointed out that only rich conditions (C/O ? 0.25) are possible for WSR creation, because they allow partial methane conversion. Three kinetic regimes, related to different temperature ranges, have been identified on the basis of product distribution analysis. Both the oxidation and pyrolitic regimes, occurring respectively in low- and high-temperature ranges, are the most interesting working conditions for diluted combustion. The former, leading to CO and H2O as main reaction products, is suitable for reburning technology. The latter, which corresponds to large production of CO and H2, has been shown to be a reasonable explanation of flameless combustion. Advantages and potentials of this innovative process are analyzed, taking into account the kinetic pathway followed in the different working conditions.

In this study we examine the determination accuracy of both the mean radiant temperature (Tmrt) and the Universal Thermal Climate Index (UTCI) within the scope of numerical weather prediction (NWP), and global (GCM) and regional (RCM) climate model simulations. First, Tmrt is determined and the so-called UTCI-Fiala model is then used for the calculation of UTCI. Taking into account the uncertainties of NWP model (among others the HIgh Resolution Limited Area Model HIRLAM) output (temperature, downwelling short-wave and long-wave radiation) stated in the literature, we simulate and discuss the uncertainties of Tmrt and UTCI at three stations in different climatic regions of Europe. The results show that highest negative (positive) differences to reference cases (under assumed clear-sky conditions) of up to -21°C (9°C) for Tmrt and up to -6°C (3.5°C) for UTCI occur in summer (winter) due to cloudiness. In a second step, the uncertainties of RCM simulations are analyzed: three RCMs, namely ALADIN (Aire Limitée Adaptation dynamique Développement InterNational), RegCM (REGional Climate Model) and REMO (REgional MOdel) are nested into GCMs and used for the prediction of temperature and radiation fluxes in order to estimate Tmrt and UTCI. The inter-comparison of RCM output for the three selected locations shows that biases between 0.0 and ±17.7°C (between 0.0 and ±13.3°C) for Tmrt (UTCI), and RMSE between ±0.5 and ±17.8°C (between ±0.8 and ±13.4°C) for Tmrt (UTCI) may be expected. In general the study shows that uncertainties of UTCI, due to uncertainties arising from calculations of radiation fluxes (based on NWP models) required for the prediction of Tmrt, are well below ±2°C for clear-sky cases. However, significant higher uncertainties in UTCI of up to ±6°C are found, especially when prediction of cloudiness is wrong.

Ostrava in the Moravian-Silesian region (Czech Republic) is a European air pollution hot spot for airborne particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), and ultrafine particles (UFPs). Air pollution source apportionment is essential for implementation of successful abatement strategies. UFPs or nanoparticles of diameter <100 nm exhibit the highest deposition efficiency in human lungs. To permit apportionment of PM sources at the hot-spot including nanoparticles, Positive Matrix Factorization (PMF) was applied to highly time resolved particle number size distributions (NSD, 14 nm-10 μm) and PM0.09-1.15 chemical composition. Diurnal patterns, meteorological variables, gaseous pollutants, organic markers, and associations between the NSD factors and chemical composition factors were used to identify the pollution sources. The PMF on the NSD reveals two factors in the ultrafine size range: industrial UFPs (28%, number mode diameter - NMD 45 nm), industrial/fresh road traffic nanoparticles (26%, NMD 26 nm); three factors in the accumulation size range: urban background (24%, NMD 93 nm), coal burning (14%, volume mode diameter - VMD 0.5 μm), regional pollution (3%, VMD 0.8 μm) and one factor in the coarse size range: industrial coarse particles/road dust (2%, VMD 5 μm). The PMF analysis of PM0.09-1.15 revealed four factors: SIA/CC/BB (52%), road dust (18%), sinter/steel (16%), iron production (16%). The factors in the ultrafine size range resolved with NSD have a positive correlation with sinter/steel production and iron production factors resolved with chemical composition. Coal combustion factor resolved with NSD has moderate correlation with SIA/CC/BB factor. The organic markers homohopanes correlate with coal combustion and the levoglucosan correlates with urban background. The PMF applications to NSD and chemical composition datasets are complementary. PAHs in PM1 were found to be associated with coal combustion factor.

In themediumtolongterm,lowfossilfuelavailabilitywillmakeitnecessarytofindalternatives.Mass productionofbiofuelswillnotbeapracticalsolutionbecauseitrequiresstrongcompetitionforland that isusedforgrowingfood.Therefore,itwillbenecessarytorevisetheframeoftransportation energy sources.Thenumberofpurelight-andheavy-dutyelectricvehiclescouldincreaseinurban areas.Instead,itwillbehardtofindaviablealternativetotheinternalcombustionengineforextra- urban transportvehicles,thereforealternativesyntheticfuelscouldbeusedtocompensateforfossil fuel depletion.Asidefromasmallshareobtainablefrombiomass,mostsyntheticfuelsareexpectedto be obtainedfromcoal.Amongthese,syntheticnaturalgasrepresentsaverygoodsolution.Infact, syntheticnaturalgaswillbeadvantageouswithrespecttohydrogen,whoseon-boardstoragewillbean unsolvedprobleminthemediumterm,andwithrespecttosyntheticliquidfuels,whichrequiremore energy intheproductionphase.Moreover,thecarboncontentofliquidfuels,whichishigherthanthat of gaseousfuels,willberesponsibleforhigherCO2 emissionsfromvehicles.Currently,naturalgashas poor diffusioninthetransportsector,andthispaperhighlightsthemotivationsforfavouringapolicy aimedatincreasingtheshareofgaseousfuel-poweredvehicles.Inadditiontothelowenvironmental impact,syntheticnaturalgasalsooffersthepossibilityofoptimisingtheutilisationoffutureresources

Based on a 3-year (2011-2013) dataset of 10-min records collected at 10, 20, 40, and 80 m from the met mast of Cabauw, a time-varying investigation of the wind shear coefficient (WSC) relationship with atmospheric stability was addressed. WSC interdaily and interannual variability was analysed according to a 2-D combined representation, which confirmed a clear oval-shaped "solar shadow" caused by solar warming observed during diurnal unstable hours, and large WSCs occurring under strong stable conditions during the summer nights.Three different power law based approaches were compared to extrapolate wind resource to the turbine hub height according to the following WSC settings: (i) site's previously measured overall yearly average; (ii) site's previously measured stability-varying yearly averages; (iii) 10-min theoretically predicted values by applying the Panofsky and Dutton (PD) model. The latter proved to be the finest approach, providing extrapolated wind resource biased by 1-5% and energy yield by 5.51-10.57%, and showing the highest accuracy occurring under the most frequent (and most energetic) neutral conditions, when Weibull distribution's tail including the highest wind speed bins is particularly finely reproduced.This work confirmed how instrumental availability of detailed information on site's atmospheric stability classification is for wind energy studies.