• Energy Research
• Closed Access close
• Restricted close
• CN close
• US close
• DE close
• EU close

Power System Stabilizers (PSS) have broad application throughout the world. PSS application requires careful tuning which is usually accomplished in the field with the generator and power system in an abnormal condition. Recently developed equipment which combines fast Fourier transform capability with digital computer technique provides a means of PSS tuning which is faster and more accurate than was previously obtainable. This paper describes a PSS tuning test conducted using the new technique. The advantages will be apparent to the reader. The described test is very poignant as evidenced by two unexpected occurrences of instability.

Abstract Despite the fact that Nanofluids and nanofluid based phase change materials (PCMs) have been identified as potential candidate for various heat transfer and energy storage applications, they are still facing various challenges such as stability, pressure drop and high pumping power. Nanoparticle size plays a bigger role in hindering nanofluid applications, yet effect of nanoparticles size does not receive the attention it deserves. The inconsistence and contradiction of information gives an impression that the area is not well understood therefore more information need to be made available in the literature. In this paper, the effect of nanoparticle size on thermophysical properties of nanofuid and nanofluid PCMs is reviewed. The work involves discussing the effect of nanoparticle size on thermo-physical properties of nanofluid and nanofluid PCMs through systematic analysis of past experimental and theoretical work. The results show that, thermal conductivity generally increase as nanoparticle size decreases while surface tension increases as nanoparticle size increases. Latent heat of fusion reduces as nanoparticle diameter decreases. Although, nanoparticles increase viscosity, the effect of particle size diameter is not yet clear. More research is therefore needed in this area of nanoparticle size effect on nanofluid and nanofluid PCMs so that optimum size can be established for each application.

Abstract Molten salt reactors (MSRs) are a class of next-generation nuclear reactors that have received recent industrial and research interest. A generalized species transport solver was implemented in the Virtual Environment for Reactor Applications (VERA) computing suite to extend this tool to analyze liquid-fueled MSRs. This core simulator has been extended to model the transport of fission product gases into a collection of circulating gas bubbles with the purpose of removing the gases. This paper presents the governing species transport equation, along with various nuclear source terms. Development of the source term for phase migration is discussed, along with a simplified interfacial area tracking method. Finally, a case study on a simplified MSR loop is presented in which modeling parameters were varied to assess their impact on gas removal. The steady state results show that parameters such as bubble diameter, gas injection rate and mass transfer coefficient have a low to moderate effect on the fraction of xenon in the core region. Removal efficiency has the greatest effect on the fraction in the core region. After the pump bowl, bubble diameter has a minor effect on the fraction of xenon in the gas void. These results point out that increasing parameters such as mass transfer coefficient, gas injection rate, and removal efficiency drives the xenon into the circulating gas void, while decreasing bubble diameter also drives xenon into the gas void by increasing interfacial area.

Abstract Thermal performance of three naturally ventilated public buildings in which the wind tower is an important architectural freature is studied. One of the three builidings as well as it's wind tower is instrumented for temperature, relative humidity and airflow velocity measurements, and the other two are instrumented for temperature measurement. The results have led to a discussion concerning the degree of wind tower effectiveness in achieving thermal comfort.

Impact loads in large iron and steel enterprise bring the power system reactive power impact, which makes the fluctuation of the system voltage, power factor and other parameters are out of the limitation of the national standard. Substation bus reactive load forecasting in large iron and steel enterprise can be introduced to determine reactive power optimization strategy and the switching of capacitors. In this paper, a combination forecasting model of quadratic self-adaptive exponential smoothing (QSES) model and converse exponential (CE) model has been proposed for substation bus reactive load forecasting. The numerical results in Jinan iron and steel Group show the application of this model is encouraging. Introduction

ABSTRACTUse of micron-size particles of synthetic diamond in oxide matrices prepared by sol-gel processing is explored. Alumina and borosilicate-diamond composite coatings are deposited on soda-lime microscope glass and fused silica substrates using dipping technique and thermophoresis. By varying the thermal gradient between the substrate and the solution, the quality of the films and the concentration of the particles can be controlled.

An all-round supramolecular zwitterionic hydrogel electrolyte with the advantages ofin siturepair, H2O-poor interface, and boosting the desolvation of hydrated Zn2+is proposed to enable the fabrication of environment-adaptive dendrite-free zinc ion capacitors.

Forest soil acidification caused by acid deposition is a serious threat to the forest ecosystem. To investigate the liming effects of biomass ash (BA) and alkaline slag (AS) on the acidic topsoil and subsoil, a three-year field experiment under artificial Masson pine was conducted at Langxi, Anhui province in Southern China. The surface application of BA and AS significantly increased the soil pH, and thus decreased exchangeable acidity and active Al in the topsoil. Soil exchangeable Ca2+ and Mg2+ in topsoil were significantly increased by the surface application of BA and AS, while an increase in soil exchangeable K+ was only observed in BA treatments. The soil acidity and active Al in subsoil were decreased by the surface application of AS. Compared with the control, soluble monomeric and exchangeable Al in the subsoil was decreased by 38.0% and 29.4% after 3 years of AS surface application. There was a minimal effect on soluble monomeric and exchangeable Al after the application of BA. The soil exchangeable Ca2+ and Mg2+ in the subsoil increased respectively by 54% and 141% after surface application of 10 t ha-1 AS. The decrease of soil active Al and increase of base cations in subsoil were mainly attributed to the high migration capacity of base cations in AS. In conclusion, the effect of surface application of AS was superior to BA in ameliorating soil acidity and alleviating soil Al toxicity in the subsoil of this Ultisol.

Abstract Bio-based polyurethane (BPU) foams were successfully prepared using hydrothermally liquefied wheat straw (WS) to substitute a mass fraction of up to 50% of polyols. Response surface methodology (RSM) based on central composite design (CCD) was employed to optimize four process parameters: NCO/OH molar ratio, loading of crosslinking agent (glycerol), loading of catalyst (a mixture of triethylene diamine, stannous octoate, and triethanolamine), and loading of blowing agent (water) for the maximum compression strength of the rigid BPU foams. With the quadratic orthogonal regression model, verified by experimentation, the maximum compression strength of approximately 180 kPa was obtained at the following optimal conditions: NCO/OH molar ratio of 1.24:1, glycerol addition of 12.11%, catalyst loading of 0.76%, and blowing agent addition of 1.31% in relation to the total mass of polyols. The BPU foam prepared at the optimal conditions exhibits good thermal conductivity (0.045 Wm−1K−1) and thermal stability, comparable to those of a reference foam prepared with 100% PPG400.