• Energy Research
• engineering and technology close
• DE close
• CA close

A reduction of the inactive components can increase the energy density and reduce production cost of Li‐ion batteries. But an effective reduction of the binder amount also negatively affects the adhesion of the electrode. Herein, slot‐die coating of a primer layer for Li‐ion anodes is investigated. It is shown that the use of a primer layer with only 0.3 g m−2 can increase the adhesive force by the factor of 5 as well as the cell performance for anodes with low binder content. The process limits for a stable, defect‐free primer coating are investigated at coating speeds of up to 550 m min−1. The limits coincide both for a setup without vacuum box and with vacuum box with theory‐based equations. By using a vacuum box, the minimum wet film thickness can be reduced by half.

Carbon capture and utilization (CCU) is a field of key emerging technologies. CCU can support the economy to decrease the dependency on fossil carbon raw materials, to stabilize electricity grids and markets with respect to a growing share of fluctuating renewable energy. Furthermore, it can contribute to mitigate anthropogenic CO2 emissions. The German Federal Ministry of Education and Research has provided substantial financial support for research and development projects, stimulating research, development, and innovations in the field of CO2 utilization. This review provides an overview over the most relevant funding measures in this field. Examples of successful projects demonstrate that CCU technologies are already economically viable or technologically ready for industrial application. CCU technologies as elements of a future "green economy" can contribute to reach the ambitious German sustainability targets with regard to climate protection as well as raw material productivity.

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.

Exterior insulation finishing systems (EIFSs) can efficiently promote energy efficiency of buildings. In this study, an EIFS with high thermal efficiency is presented to improve the insulation behavior of building enclosure. Based on heat transfer analysis results, energy simulations of buildings with fire spread prevention structures were performed. Results revealed that heat flow through the wall increased by 10.3 % when using a metal rail to fix the insulation; in contrast, using non-combustible phenolic foam reduces heat flow by 37.4 %, satisfying the requirement for fire spread prevention structures. Additionally, the energy consumption decreased by 8.8 % when both mineral wool and phenolic foam were applied. Fire spread prevention structures are essential to improve the fire safety performance of buildings. This external insulation system efficiently promote energy saving in building; additionally, leveraging a phase change material to improve the thermal storage performance of the building can reduce energy consumption by up to 11.9 %.

Abstract In this paper, an exergoeconomic analysis and optimization of a combined solar and wind energy based system is proposed. The trigeneration system produces ammonia, hydrogen and electricity through integrated solar photovoltaic panels and wind turbines. Also, an ammonia fuel cell unit is utilized for generating power during insufficient available energy. The overall exergetic efficiency is found to be 29.7% and the corresponding energetic efficiency is 28.5% under design conditions. In addition, the total cost rate is obtained as 63,345 $/h. Moreover, multi-objective optimization is performed with various decision variables at different combinations of solar intensities and wind speeds, considering the maximization of exergy efficiency and minimization of total cost rates. The developed system provides better optimal operation points under high wind speeds. The optimal exergy efficiency is found to vary between 10.9% and 38.2% depending on the available solar and wind energy. The corresponding optimal total cost rates vary between 11,959 $/h and 59,755 $/h, respectively. Several parametric studies are also performed to determine the effects of changing system conditions on the thermodynamic and economic performance of the developed system.

AbstractCompanies are forced by rising energy costs to seize control of their energy consumption to maintain contestability. There-fore, transparency over the companies’ energy flux along the production process is required. Energy data management software is helpful, but cost-intensive. Hence, especially small and medium sized enterprises (SME) spare this investment. In this paper, the requirements for an energy controlling infrastructure in SME are elaborated, followed by a deduced software-architecture which supports the respective controlling structure. Further, the prototypical realization of the corresponding tool “Green-Cockpit” will be presented. The free of cost, open source and web-based tool is designed to help companies monitor, interpret, analyze, plan and report their energy consumption. The Green Cockpit tool outperforms other energy management software at management disciplines with its ability to not only analyze energy consumption, but plan and control it additionally.

Abstract Catalyst layer structural changes in polymer electrolyte membrane fuel cells have significant impact on the cell performance and durability. In this study, ex-situ experiments are designed to investigate the effect of humidity and/or thermal cycles on the structural changes of catalyst layers. The relative humidity and temperature are controlled by an environmental chamber and the catalyst layer structure is characterized by scanning electron microscopy and optical microscopy. The experimental results indicate that crack growth and development, catalyst agglomerate detachment, and surface bulges are the main structural changes of the catalyst layers. Applying relative humidity and thermal cycling simultaneously causes the most significant crack growth, while applying thermal cycling alone causes no appreciable changes. This indicates that the absolute humidity is the key parameter for the crack growth. Through cyclic voltammetry analysis, it is shown that the electrochemical active surface area decreases from 64.1 m2 g−1 to 49.1 m2 g−1 after 500 combined relative humidity and thermal cycles. Analyses of electrochemical impedance spectroscopy show that the charge transfer resistance and ohmic resistance increase significantly after 500 combined relative humidity and thermal cycles, causing the cell performance degradation.