• Energy Research
• Restricted close
• NL close
• DE close
• EU close
• CN close

Wood biomass is turned into industrial fuel through chipping. The efficiency of chipping depends on many factors, including chipper knife wear. Chipper knife wear was determined through a long-term follow-up study, conducted at a waste wood recycling yard. Knife wear determined a sharp drop of productivity (>20%) and a severe decay in product quality. Dry sharpening with a grinder mitigated this effect, but it could not replace proper wet sharpening. Increasing the frequency of wet sharpening sessions determined a moderate increase of knife depreciation cost, but it could drastically enhance machine performance and reduce biomass processing cost. Since benefits largely exceed costs, increasing the frequency of wet sharpening sessions may be an effective measure for reducing overall chipping cost. If the main goal of a chipper operator is to increase productivity and/or decrease fuel consumption, then managing knife wear should be a primary target. (C) 2014 Elsevier Ltd. All rights reserved.

The drought prone North-West Bangladesh is vulnerable to the impacts of climate change, particularly because of less water availability in the dry period and high water requirement for crop production. Improved understanding of recent changes in crop water demand in the dry season is important for the water resources management in the region. A study was carried out to determine the potential impacts of recent climate change during last three decades on trends of water requirements of Boro rice. The reference crop evapotranspiration (ETo), potential crop water requirement (∑ETC), effective rainfall during the crop growing period (ER), potential irrigation requirement for crop evapotranspiration (∑ETC − ER) and net irrigation requirement of Boro rice were estimated using observed daily climate data in the CropWat model for the period of 1980 to 2013 for four North-West districts. Significant decreasing trends of ETo were observed in most of the dry months due to increasing relative humidity and decreasing wind-speed and sun-shine hours. The results showed decreasing trends of potential crop water requirement, i.e. the total crop evapotranspiration (∑ETC), of Boro rice due to decreasing reference crop evapotranspiration and shorter crop growing periods. The variations in trends of potential irrigation requirement for crop evapotranspiration (∑ETC − ER) found among different districts, are mainly linked to variations in trends of changes in effective rainfall. The net irrigation requirement of Boro rice has decreased, by 11% during the last three decades at an average rate of −4.4 mm year−1, instead of decreasing effective rainfall, mainly because of high rate of decrease of crop evapotranspiration (−5.9 mm year−1). Results indicate that a warming climate does not always result in higher agricultural water use and that climate change can also result in reduced water demands because of changes in humidity, wind-speed and sun-shine hours.

Searching suitable panchromatic QD sensitizers for expanding the light-harvesting range, accelerating charge separation, and retarding charge recombination is an effective way to improve power conversion efficiency (PCE) of quantum-dot-sensitized solar cells (QDSCs). One possible way to obtain a wide absorption range is to use the exciplex state of a type-II core/shell-structured QDs. In addition, this system could also provide a fast charge separation and low charge-recombination rate. Herein, we report on using a CdTe/CdSe type-II core/shell QD sensitizer with an absorption range extending into the infrared region because of its exciplex state, which is covalently linked to TiO2 mesoporous electrodes by dropping a bifunctional linker molecule mercaptopropionic acid (MPA)-capped QD aqueous solution onto the film electrode. High loading and a uniform distribution of QD sensitizer throughout the film electrode thickness have been confirmed by energy dispersive X-ray (EDX) elemental mapping. The accelerated electron injection and retarded charge-recombination pathway in the built CdTe/CdSe QD cells in comparison with reference CdSe QD-based cells have been confirmed by impedance spectroscopy, fluorescence decay, and intensity-modulated photocurrent/photovoltage spectroscopy (IMPS/IMVS) analysis. With the combination of the high QD loading and intrinsically superior optoelectronic properties of type-II core/shell QD (wide absorption range, fast charge separation, and slow charge recombination), the resulting CdTe/CdSe QD-based regenerative sandwich solar cells exhibit a record PCE of 6.76% (J(sc) = 19.59 mA cm(-2), V(oc) = 0.606 V, and FF = 0.569) with a mask around the active film under a full 1 sun illumination (simulated AM 1.5), which is the highest reported to date for liquid-junction QDSCs.

With the concept of climate services rapidly climbing research and research-funding agendas worldwide, the time is ripe for a debate about the objectives, scope and content of such services.

The transition to a low carbon future is starting to affect landscapes around the world. In order for this landscape transformation to be sustainable, renewable energy technologies should not cause critical trade-offs between the provision of energy and that of other ecosystem services such as food production. This literature review advances the body of knowledge on sustainable energy transition with special focus on ecosystem services-based approaches and methods. Two key issues emerge from this review: only one sixth of the published applications on the relation between renewable energy and landscape make use of the ecosystem service framework. Secondly, the applications that do address ecosystem services for landscape planning and design lack efficient methods and spatial reference systems that accommodate both cultural and regulating ecosystem services. Future research efforts should be directed to further advancing the spatial reference systems, the use of participatory mapping and landscape visualizations tools for cultural ecosystem services and the elaboration of landscape design principles.

Since 2007, a range of new modeling approaches and tools have been developed for sustainability impact assessment (SIA), but a lack of universal acceptance of SIA tools in applied policy making is observed. The current article gives an overview of experiences from several European and international projects, critically reviews the selected SIA tools and then discusses a number of reasons for the observed disconnect of the tools with the potential users. Largely based on the experiences of the presented SIA tools focusing land use policy advice, a decision tree is designed, which may facilitate an adequate, region and developmental phase specific selection of tool-box components for the development of SIA tools in future. Elements to ensure end-user participation are also integrated in the decision tree in order to increase the likelihood of the tool in applied land use policy advice. In addition, the Challenges in SIA tool development and use are further discussed.

This paper compares the quantity and quality of solid waste obtained from traditional ponds and recirculating aquaculture systems (RAS) for striped catfish and evaluates methane and compost production from these wastes. Striped catfish sludge was collected from four commercial ponds along the Mekong river and from three indoor RAS. The amount of sludge dry matter produced per kilogram of fish in ponds was 6 times higher than that in RAS. However, the concentration of nutrients in solid waste from RAS was much higher, with better compost quality and higher methane yield than that of sludge from ponds. Out of the collected 381 L biogas, the methane yield of striped catfish's solid waste in RAS systems was 201 L per kg chemical oxygen demand (COD). In ponds, the collected 267 L biogas yielded 125 L CH4 per kg COD. The higher methane production from RAS sludge concurred with higher digestibility of COD: 58% for RAS versus 38% for ponds. The quality and quantity of methane from striped catfish sludge were lower than that for other animal manures, and the resulting electricity yield was low. Considering the higher nutrient concentration in RAS-sludge, we recommend the combination RAS and composting in reusing sludge, which is presently the best option for a more sustainable and cleaner striped catfish production system.

Several dairy farms in the Netherlands aim at reducing their environmental impact by improving the internal nutrient cycle (INC) at farm level. Practices to improve nutrient cycling at these INC farms, however, might not only reduce the environmental impact on-farm, but alter also the off-farm environmental impact associated with supply chain processes (production and transport) related to inputs entering the farm, such as purchased feed or fertilizer or the economic or societal performance of these farms. We compared, therefore, a set of sustainability indicators of nine INC farms with a group of benchmark farms, comparable in terms of farm size, intensity and site-specific circumstances. This benchmark group was composed using statistical matching to exclude the effect of these characteristics on economic, environmental and societal performance. Economic indicators used were: farm income per unpaid annual working unit and the costs to revenues ratio. Environmental indicators used were derived from a cradle-to-farm-gate life cycle assessment: land occupation (LO), non-renewable energy use (NREU), global warming potential (GWP), acidification potential (AP) and eutrophication potential (EP), expressed per kg fat-and-protein-corrected milk (FPCM). In addition, we quantified the soil content of organic carbon and phosphorus, and the soil nitrogen supply. Societal indicators used were: payments for agri-environmental measures, grazing hours and penalties for aberrant milk composition. Results showed that INC farms had a lower non-renewable energy use per kg FPCM, higher soil organic carbon content and received higher annual payments for agri-environmental measures, whereas economic and other environmental, societal indicators did not differed. Furthermore, we demonstrated the need for a sound benchmark to assess the effect of INC-farming on the economic, environmental and societal performance. Statistical matching enabled us to define, for each INC farm, a benchmark group with similar farm characteristics, which are known to affect sustainability indicators. Observed differences in sustainability indicators between both farm groups, therefore, truly resulted from aiming at internal nutrient cycling, and not from differences in other farm characteristics.