• Energy Research
• Closed Access close
• Open Source close
• natural sciences close
• DE close
• FR close

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

AbstractMononuclear trivalent lanthanide complexes with formula [Ln(L)(NO3)3] [in which L=4,4‐difluoro‐8‐(2′:2′′;6′′:2′′′‐terpyridin‐4′′‐yl)‐1,3,5,7‐tetramethyl‐2,6‐diethyl‐4‐bora‐3a,4a‐diaza‐s‐indacene (Boditerpy)] are reported for Ln=Yb, Nd, Er, La and Gd. According to the crystal structure of the Yb complex, the lanthanide ion is bound to the terdentate terpyridine and the inner coordination sphere of the nine‐coordinate lanthanide ion is completed by three bidentate nitrate anions. The coordination polyhedron can be described as a distorted tricapped antiprism. The terpyridine chelate is almost planar and tilted by nearly 60° from the indacene subunit. FT‐IR spectra confirm the bidentate binding mode of the nitrate anions for the other complexes. NMR and ES‐MS spectra (through characteristic isotopic patterns) confirm the chemical formulation. The complexes have high molar absorption coefficients in the visible spectral region (65 000 M−1 cm−1 at 529 nm) and display sizeable NIR luminescence (900 to 1600 nm, for Ln=Yb, Nd and Er), upon irradiation through the electronic state of the indacene moiety at 514 nm. Crystal‐field splitting was analysed at low temperature. The quantum yield of the Yb solution (10−4 M) in dichloromethane amounts to 0.31 %, corresponding to a sensitisation efficacy of the ligand of ca. 63 %.

Atmospheric concentrations of the greenhouse gas nitrous oxide (N(2)O) have increased significantly since pre-industrial times owing to anthropogenic perturbation of the global nitrogen cycle, with animal production being one of the main contributors. Grasslands cover about 20 per cent of the temperate land surface of the Earth and are widely used as pasture. It has been suggested that high animal stocking rates and the resulting elevated nitrogen input increase N(2)O emissions. Internationally agreed methods to upscale the effect of increased livestock numbers on N(2)O emissions are based directly on per capita nitrogen inputs. However, measurements of grassland N(2)O fluxes are often performed over short time periods, with low time resolution and mostly during the growing season. In consequence, our understanding of the daily and seasonal dynamics of grassland N(2)O fluxes remains limited. Here we report year-round N(2)O flux measurements with high and low temporal resolution at ten steppe grassland sites in Inner Mongolia, China. We show that short-lived pulses of N(2)O emission during spring thaw dominate the annual N(2)O budget at our study sites. The N(2)O emission pulses are highest in ungrazed steppe and decrease with increasing stocking rate, suggesting that grazing decreases rather than increases N(2)O emissions. Our results show that the stimulatory effect of higher stocking rates on nitrogen cycling and, hence, on N(2)O emission is more than offset by the effects of a parallel reduction in microbial biomass, inorganic nitrogen production and wintertime water retention. By neglecting these freeze-thaw interactions, existing approaches may have systematically overestimated N(2)O emissions over the last century for semi-arid, cool temperate grasslands by up to 72 per cent.

We present the determination of the alkaloid hordenine and its forensic relevance as a qualitative and quantitative marker for beer consumption. A simple, rapid and sensitive ultra-performance liquid chromatography (UPLC)-tandem mass spectrometry (MS/MS) method for the determination of hordenine in human serum samples was developed and validated. The application was tested with serum samples after enzymatic cleavage. After addition of the synthesized internal standard hordenine-D 4, a liquid-liquid extraction with dichloromethane and diethyl ether was performed. Chromatographic separation was conducted with a Waters Acquity® UPLC system with gradient elution on an Agilent Eclipse XDB-C18 column (4.6 mm × 150 mm, 5-μm particle size). For quantification, a Waters Acquity® TQ detector (version SNC 627) with a positive electrospray ionization probe and multiple reaction monitoring mode was used. A flow rate of 0.4 ml/min was applied. The retention time for both the analyte and the internal standard was 3.67 min. Linearity was demonstrated from 0.2 to 16 ng/ml (R(2) > 0.999). The lower limit of quantification was 0.3 ng/ml in serum. Matrix effects and extraction recoveries for low and high concentrations were within acceptable limits of 75-125% and 50%, respectively. To the best of our knowledge there is no corresponding method for the determination of hordenine by UPLC-MS/MS in serum. By our drinking studies we demonstrate that beer consumption leads to detectable hordenine concentrations in serum and observed a linear elimination of total hordenine correlating to blood alcohol concentration, which shows that hordenine can be used as a reliable qualitative and quantitative marker for beer consumption. The validated method was successfully applied to serum from actual forensic cases.

AbstractCellulose and lignin nanoparticles are high‐value‐added products obtained from lignocellulosic biomasses through several steps of cellulose purification and lignin extraction. These steps drastically reduce the potential feedstock revenue when carried out as stand‐alone methodologies. To increase biomass yields, we describe here a strategy to design a biorefinery focused on producing cellulose and lignin nanoparticles as main products, but also aim to recover and benefit from other biomass components using only water‐based processes. Sequential pressurized liquid extractions and diluted acid and alkaline treatments were carried out to fractionate elephant grass biomass, yielding (for every 100 g of biomass): 30 g of cellulose pulp (converted to 9 g of cellulose nanocrystals and 9 g of cellulose nanofibers); 10 g of lignin (used to produce 8.5 g of stable colloidal lignin nanoparticles by probe‐sonication in water); 7.5 g of extractives (e.g. sterols and phenolics) and 23 g of xylose (converted to 4.1 g of furfural). Alternatively, to allow for the flexible use of the cellulose fraction in the proposed biorefinery, 22 g of glucose could be produced by enzymatic hydrolysis. The results demonstrate that water‐based processes are suitable for a holistic use of biomass, providing a comprehensive set of high‐value‐added co‐products that are renewable and cost‐effective chemical, cosmetic, food, polymer and pharmaceutical solutions.

Abstract This paper presents a comparison of commercially used German and Russian reactor pressure vessel steels from the positron annihilation spectroscopy (PAS) point of view, having in mind knowledge obtained also from other techniques from the last decades. The second generations of Russian RPV steels seems to be fully comparable with German steels and their quality enables prolongation of NPP operating lifetime over projected 40 years. The embrittlement of CrMoV steel is very low due to the dynamic recovery of radiation-induced defects at reactor operating temperatures.

This study is to our knowledge the first to describe the effect of a Gas-Gas Heater (GGH) of a coal fired power plant's has on (i) the H2SO4 concentration and (ii) the particle/aerosol number concentration and particle size distribution present in the flue gas. In the absence of a GGH, homogenous nucleation takes places inside the Wet Flue Gas Desulphurisation (WFGD) converting the gaseous H2SO4 into aerosol H2SO4. This leads to a high aerosol number concentration behind the WFGD with 80% of the aerosols being smaller than 0.02 μm. This implies that an amine based carbon capture (CC) installation treating this flue gas can suffer from amine mist formation due to the high amount of available nuclei (i.e., H2SO4 aerosols) resulting in high amine emissions. In contrast, in the presence of a GGH not only 70% of the H2SO4 is removed from the flue gas (measured at the Nijmegen powerplant), but also homogenous nucleation in the WFGD is prevented resulting in low particle number concentrations. The flue gas leaving the GGH will not create any mist formation issues in an amine based CC installation due to the low amount of nuclei present in the flue gas. It is not the reduction in H2SO4 concentration by 70% inside the GGH as such that prevents mist formation but absence of H2SO4 in its aerosol form. These results are most likely quite widely transformable to other power plants that burn low sulfur coal i.e., around 0.7 weight%. This information will serve future pilot and demo CC installation around the world; in particular when retrofitted on power plants that have a GGH.

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.