• Energy Research
• Closed Access close
• Embargo close
• 12. Responsible consumption close
• 2. Zero hunger close
• DE close
• FR close

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

Abstract The hybrid pneumatic power system (HPPS) proposed in this research replaces the battery’s electric-chemical energy with flow work and optimizes the management and utilization of the energy. This power system is able to keep the internal-combustion engine working at its optimal condition and turn its waste energy into effective mechanical energy and so enhance the thermal efficiency of the whole system. Using computer simulation software ITI-SIM, this study simulates the overall dynamic characteristics of the system in accordance with the regulated running-vehicle test-mode ECE47, and, with experimental verification and analysis, proves that this system can meet the requirements of the standard running-car mode. As for recycling the waste energy, the experimental results show that this design could offset the shortcomings of the low-density of pneumatic power and so effectively enhance the efficiency of the whole system.

Atmospheric concentrations of the greenhouse gas nitrous oxide (N(2)O) have increased significantly since pre-industrial times owing to anthropogenic perturbation of the global nitrogen cycle, with animal production being one of the main contributors. Grasslands cover about 20 per cent of the temperate land surface of the Earth and are widely used as pasture. It has been suggested that high animal stocking rates and the resulting elevated nitrogen input increase N(2)O emissions. Internationally agreed methods to upscale the effect of increased livestock numbers on N(2)O emissions are based directly on per capita nitrogen inputs. However, measurements of grassland N(2)O fluxes are often performed over short time periods, with low time resolution and mostly during the growing season. In consequence, our understanding of the daily and seasonal dynamics of grassland N(2)O fluxes remains limited. Here we report year-round N(2)O flux measurements with high and low temporal resolution at ten steppe grassland sites in Inner Mongolia, China. We show that short-lived pulses of N(2)O emission during spring thaw dominate the annual N(2)O budget at our study sites. The N(2)O emission pulses are highest in ungrazed steppe and decrease with increasing stocking rate, suggesting that grazing decreases rather than increases N(2)O emissions. Our results show that the stimulatory effect of higher stocking rates on nitrogen cycling and, hence, on N(2)O emission is more than offset by the effects of a parallel reduction in microbial biomass, inorganic nitrogen production and wintertime water retention. By neglecting these freeze-thaw interactions, existing approaches may have systematically overestimated N(2)O emissions over the last century for semi-arid, cool temperate grasslands by up to 72 per cent.

SummaryThe German government has adopted a law that requires sewage plants to go beyond the recovery of phosphorus from wastewater and to promote recycling. We argue that there is no physical global short‐ or mid‐term phosphorus scarcity. However, we also argue that there are legitimate reasons for policies such as those of Germany, including: precaution as a way to ensure future generations’ long‐term supply security, promotion of technologies for closed‐loop economics in a promising stage of technology development, and decrease in the current supply risk with a new resource pool.

AbstractCellulose and lignin nanoparticles are high‐value‐added products obtained from lignocellulosic biomasses through several steps of cellulose purification and lignin extraction. These steps drastically reduce the potential feedstock revenue when carried out as stand‐alone methodologies. To increase biomass yields, we describe here a strategy to design a biorefinery focused on producing cellulose and lignin nanoparticles as main products, but also aim to recover and benefit from other biomass components using only water‐based processes. Sequential pressurized liquid extractions and diluted acid and alkaline treatments were carried out to fractionate elephant grass biomass, yielding (for every 100 g of biomass): 30 g of cellulose pulp (converted to 9 g of cellulose nanocrystals and 9 g of cellulose nanofibers); 10 g of lignin (used to produce 8.5 g of stable colloidal lignin nanoparticles by probe‐sonication in water); 7.5 g of extractives (e.g. sterols and phenolics) and 23 g of xylose (converted to 4.1 g of furfural). Alternatively, to allow for the flexible use of the cellulose fraction in the proposed biorefinery, 22 g of glucose could be produced by enzymatic hydrolysis. The results demonstrate that water‐based processes are suitable for a holistic use of biomass, providing a comprehensive set of high‐value‐added co‐products that are renewable and cost‐effective chemical, cosmetic, food, polymer and pharmaceutical solutions.

Abstract Rare earth permanent magnets are important components for modern (energy) technologies and are employed to reduce GHG emissions and combat climate change. The process of extracting these minerals from the ore has contentious economic, environmental and social implications. While the environmental impacts of their production have already been analyzed in several studies, the economic and the social perspective is still under-researched. The Social Life Cycle Assessment (S-LCA) approach employed in the present research explores whether there is a difference in social risks for rare earth permanent magnet production from three different rare earth ore production locations and the associated value chains. While one is located completely in China, another is composed of processes in Australia and Malaysia. The third process chain combines processes in the United States and Japan. The Product Social Impact Life Cycle Assessment (PSILCA) 2.0 database is used to assess the social implications. The analysis focuses on value chain actors, a stakeholder group of great interest to businesses but often underrepresented in S-LCA research. The impact categories describing this stakeholder group pertain to issues of social responsibility along the value chain, fair competition and corruption. Overall, the US value chain indicates the lowest level of social risk along the supply chain. However, in order to gain a deeper understanding of the social risks a sectoral and geographical analysis is conducted. Across all three cases, the mineral, fossil fuel and chemical sectors are shown to be problematic.

The phosphate (P) fertilizer industry generates a highly hazardous and acidic wastewater. The present study reports the evaluation of an integrated precipitation and Enhanced Biological Phosphorus Removal (EBPR) process for the treatment of fertilizer plant wastewater and effluent detoxification, assessed by microtoxicity and seed germination tests. Effluent samples were collected from a local P fertilizer industry and were characterized by their high fluoride and P content. First, the samples were pre‐treated by precipitation of P and fluoride ions using hydrated lime. The resulting low‐fluoride and phosphorus effluent was then treated with the EBPR process to monitor the simultaneous removal of carbon, nitrogen, and phosphorus. Phosphorus removal included a two‐stage anaerobic/aerobic system operating under continuous flow. Pre‐treated wastewater was added to the activated sludge and operated for 160 days in the reactor. The operating strategy included increasing the organic loading rate from 0.3 to 1.2 g chemical oxygen demand (COD)/L day. The stable and high removal rates of COD, NH4+‐N, and PO43−‐P were then recorded. The mean concentrations of the influent were approximately 3600 mg COD/L, 60 mg N/L and 14 mg P/L, which corresponded to removal efficiencies of approximately 98%, 86%, and 92%, respectively. The microtoxicity of the treated wastewater was then monitored by LUMIStox and its phytotoxicity was investigated on cress, tomato, wheat, maize, ryegrass, and alfalfa seed germination. LUMIStox tests showed that treatment allowed a significant toxicity removal. Moreover, the untreated wastewater inhibited the species germination even when diluted 10 times, whereas a positive effect of treated wastewater was noticed. © 2013 American Institute of Chemical Engineers Environ Prog, 33: 463–471, 2014

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

Abstract The use of organic wastes as new renewable energy sources is becoming necessary to achieve the growing energy demand in Tunisia. In this work, the pyrolysis of abundant waste fish fats provided by a canned Tuna factory was examined in a laboratory fixed-bed reactor. The main objective was to analyze the properties and the composition of the produced bio-oil using in order to implement the suitable valorization strategy. Therefore, high heating value, viscosity, density, flash point, acidity index, moisture content and ash content measurements as well as FTIR and GCMS analyses were carried out to characterize the pyrolytic oil obtained during waste fish pyrolysis at 500 °C. The obtained results revealed that waste fish fats can be considered as important feedstock for biofuel production. In particular, the bio-oil characterization showed the presence of many organic compounds such as alkanes, alkenes, alkynes, cyclic hydrocarbons, carboxylic acids, aldehydes and alcohols. These compounds could be used as a valuable and sustainable chemicals source. Moreover, the bio-oil properties indicated a good calorific value (~ 9391 kcal/kg) compared to Tunisian Diesel and European biodiesel specifications. In contrast, higher acidity (~ 103 mg KOH/g sample) and viscosity (~ 7 cSt) compared to conventional fuels were obtained. These properties limit the direct use of bio-oils as alternative fuel in a Diesel engine. An efficient mixture with fossil fuel may be a promising solution to improve the fuel properties. Hence, pyrolysis seems to be an eco-friendly process to recover the fish fatty wastes in Tunisia. The implementation of such management strategy will help Tunisian agri-food industries to reduce their environmental impact and fossil fuel consumption and to promote the renewable energy use.