• Energy Research
• 7. Clean energy close
• 11. Sustainability close
• DE close
• NL close
• FI close

Attempts to model any present or future power grid face a huge challenge because a power grid is a complex system, with feedback and multi-agent behaviors, integrated by generation, distribution, storage and consumption systems, using various control and automation computing systems to manage electricity flows. Our approach to modeling is to build upon an established model of the low voltage electricity network which is tested and proven, by extending it to a generalized energy model. But, in order to address the crucial issues of energy efficiency, additional processes like energy conversion and storage, and further energy carriers, such as gas, heat, etc., besides the traditional electrical one, must be considered. Therefore a more powerful model, provided with enhanced nodes or conversion points, able to deal with multidimensional flows, is being required. This article addresses the issue of modeling a local multi-carrier energy network. This problem can be considered as an extension of modeling a low voltage distribution network located at some urban or rural geographic area. But instead of using an external power flow analysis package to do the power flow calculations, as used in electric networks, in this work we integrate a multiagent algorithm to perform the task, in a concurrent way to the other simulation tasks, and not only for the electric fluid but also for a number of additional energy carriers. As the model is mainly focused in system operation, generation and load models are not developed. The financial support from EPSRC for Liz Varga on project entitled "Transforming Utilities’ Conversion Points" (no. EP/J005649/1) is gratefully acknowledged.

The thermo-hydro-mechanical behaviour of a water-saturated cement-based heat store for domestic applications has been investigated. Numerical simulations have been employed to locate the critical regions during thermal loading, for which analytical solutions have been derived and validated by numerical simulations. The analytical solutions allow a fast screening of materials and design parameters in relation to the stresses induced by thermomechanical loading. Maximum stresses in the system have been quantified based on the thermomechanical properties of three heat exchanger materials selected by design engineers and of the filling material. Sensitivity analyses indicate that the stress distribution is very sensitive to the thermal expansion coefficients of the involved materials. The results of this study can serve as a guide line for the design of the present and similar heat storage systems. The analytical solution developed is a fast and robust method for the evaluation of stresses around heat exchangers embedded in a solid material and can serve as a tool for design optimisation.

SummaryEnvironmentally extended multiregional input‐output (EE MRIO) tables have emerged as a key framework to provide a comprehensive description of the global economy and analyze its effects on the environment. Of the available EE MRIO databases, EXIOBASE stands out as a database compatible with the System of Environmental‐Economic Accounting (SEEA) with a high sectorial detail matched with multiple social and environmental satellite accounts. In this paper, we present the latest developments realized with EXIOBASE 3—a time series of EE MRIO tables ranging from 1995 to 2011 for 44 countries (28 EU member plus 16 major economies) and five rest of the world regions. EXIOBASE 3 builds upon the previous versions of EXIOBASE by using rectangular supply‐use tables (SUTs) in a 163 industry by 200 products classification as the main building blocks. In order to capture structural changes, economic developments, as reported by national statistical agencies, were imposed on the available, disaggregated SUTs from EXIOBASE 2. These initial estimates were further refined by incorporating detailed data on energy, agricultural production, resource extraction, and bilateral trade. EXIOBASE 3 inherits the high level of environmental stressor detail from its precursor, with further improvement in the level of detail for resource extraction. To account for the expansion of the European Union (EU), EXIOBASE 3 was developed with the full EU28 country set (including the new member state Croatia). EXIOBASE 3 provides a unique tool for analyzing the dynamics of environmental pressures of economic activities over time.

Abstract The paper presents an equivalent circuit based simulation model for the static and dynamic behavior of lithium-ion battery systems and explains the different steps of the theoretical and experimental modeling process. The equivalent circuit based model describes the voltage-current characteristic, the state of charge behavior and the occurring losses of the battery system. A parameter identification method based on three characteristic experiments, a cycle test, an open circuit voltage test and pulse tests, is introduced. The model parameters are estimated employing a nonlinear optimization method. Furthermore, the experimental test bed for investigation of lithium-ion battery systems is described. The battery model approach is demonstrated and validated for a commercial 5 kWh lithium-ion battery system, including the model validation for test profiles and emulated battery charging and discharging profiles of a real photovoltaic home storage application. The comparison of measured and simulated voltage profiles indicates an excellent performance of the battery model.

In old age, the complex relation of food consumption with energy and nutrient requirements finds expression in both single and multiple nutritional problems. Addressing conditions affecting intake -- either from foods or from supplements -- endogenous production, bioefficacy and/or requirements can benefit nutritional health in old age through balancing requirements and supply.

Abstract Passivated emitter and rear cells (PERC) are considered to be the next generation of industrial-type screen-printed silicon solar cells. Deposition methods for rear passivation layers have to meet both the high-throughput and low-cost requirements of the PV industry in combination with high-quality surface passivation properties. In this paper, we evaluate and optimise a novel deposition technique for AlO x passivation layers by applying an inductively coupled plasma (ICP) plasma-enhanced chemical vapour deposition (PECVD) process. The ICP AlO x deposition process enables high deposition rates up to 5 nm/s as well as excellent surface recombination velocities below 10 cm/s after firing. A fixed negative charge of −4×10 12 cm −2 is measured for ICP AlO x single layers with an interface state density of 11.0×10 11 eV −1 cm −2 at midgap position. When applied to PERC solar cells the ICP AlO x layer is capped with a PECVD SiN y layer. We achieve independently confirmed conversion efficiencies of up to 20.1% for large-area (15.6×15.6 cm 2 ) PERC solar cells with screen-printed metal contacts and ICP AlO x /SiN y rear side passivation on standard boron-doped Czochralski-grown silicon wafers. The internal quantum efficiency reveals an effective rear surface recombination velocity S rear of (90±30) cm/s and an internal rear reflectance R b of (91±1)% which demonstrates the excellent rear surface passivation of the ICP AlO x /SiN y layer stack.

Carbon capture, utilization, and storage (CCUS) is a gas injection technology that enables the storage of CO2 underground. The aims are twofold, on one hand to reduce the emissions of CO2 into the atmosphere and on the other hand to increase oil/gas/heat recovery. Different types of CCUS technologies and related engineering projects have a long history of research and operation in the USA. However, in China they have a short development period ca. 10 years. Unlike CO2 capture and CO2-EOR technologies that are already operating on a commercial scale in China, research into other CCUS technologies is still in its infancy or at the pilot-scale. This paper first reviews the status and development of the different types of CCUS technologies and related engineering projects worldwide. Then it focuses on their developments in China in the last decade. The main research projects, international cooperation, and pilot-scale engineering projects in China are summarized and compared. Finally, the paper examines the challenges and prospects to be experienced through the industrialization of CCUS engineering projects in China. It can be concluded that the CCUS technologies have still large potential in China. It can only be unlocked by overcoming the technical and social challenges.