• Energy Research
• 11. Sustainability close
• 12. Responsible consumption close
• DE close
• Energy Procedia close

AbstractThe future European energy supply system will have a high share of renewable energy sources (RES) to meet the greenhouse gas emission policy of the European Commission. Such a system is characterized by the need for a strongly interconnected energy transport grid as well as a high demand of energy storage capacities to compensate the time fluctuating characteristic of most RE generation technologies. With the RE generators at the location of high harvest potential, the appropriate dimension of storage and transmission system between different regions, a cost efficient system can be achieved. To find the preferred target system, the optimization tool GENESYS (Genetic Optimization of a European Energy System) was developed. The example calculations under the assumption of 100% self-supply, show a need of about 2,500 GW RES in total, a storage capacity of about 240,000 GWh, corresponding to 6% of the annual energy demand, and a HVDC transmission grid of 375,000 GWkm. The combined cost for generation, storage and transmission excluding distribution, was estimated to be 6.87 ct/kWh.

The European Geosciences Union (EGU) brings together geoscientists from all over the world covering all disciplines of the Earth, planetary and space sciences. This geoscientific interdisciplinarity is needed to tackle the challenges of the future. One major challenge for humankind is to provide adequate and reliable supplies of affordable energy and other resources in efficient and environmentally sustainable ways. This Energy Procedia issue provides an overview of the contributions of the Division on Energy, Resources & the Environment (ERE) at the EGU General Assembly 2017.

AbstractWorld-wide coal reserves can supply the global demand for primary energy for several centuries. However, low thickness and structural complexity may constrain the economic exploitation of many coal deposits. Taking into account these circumstances, underground coal gasification (UCG) can offer an economical and sustainable approach for coal exploitation and subsequent feedstock generation from the syngas. The UCG process produces a high-calorific synthesis gas mainly consisting of methane, hydrogen and carbon dioxide, which can be used for electricity generation or feedstock production at the surface. Considering the latter, the Urea process can be applied to establish the nitrogen based fertilizer carbamide (CH4N2O). The required feedstock for carbamide production in the Urea process can be supplied by UCG syngas. The aim of the present study was the development of an integrated carbon utilisation concept based on the coupled UCG-Urea process. A significant amount of carbon dioxide from the UCG synthesis gas is required for carbamide production in the Urea process, while the excessive carbon dioxide can be re-injected into the cavities resulting in the coal seams and surrounding strata after the gasification process. Thus, a new approach for utilisation of carbon dioxide resulting from coal combustion was developed to provide a coupled technology also comprising geological storage of excessive carbon dioxide. A theoretical feasibility study considering UCG-Urea process economics and potentials of UCG and carbon dioxide storage in the gasified strata was conducted for a selected study area in northern Bangladesh revealing the high competitiveness of the combined technology on the international feedstock markets.

AbstractThe CO2-neutral self-supply of heat and electric energy is an important objective for new and existing buildings in the future [1,2]. Therefor the energy autonomous house (EAH) as a new concept for single-family buildings in central Europe is presented. It represents a further development of the solar and efficiency house concepts based on full self-sufficiency in thermal (partly provided by a fireplace) and electrical energy (100%). Two occupied houses have been built in Germany and they are under an extensive scientific monitoring with real user behavior since 2014. This contribution is focused on thermal energy balances and the differences due to different user behavior and the influence of weather conditions. The evaluated solar fraction was fsol, th ≥ 71.4% and fsol, el ≥ 91.8% for both houses in 2014. So far the 100% autonomy in electricity could not be reached due to the unusual low irradiation in Jan. and Dec. 2014 (-24% / -37% compared to long term values). Nevertheless the planned low electricity consumption of ∼ 2000 kWh/year could nearly be achieved, whereby a self-consumption rate of electric energy gains of ≥ 31.8% were assumed. Further findings of 1 ½ years of monitoring of the two EAH are presented within the paper.

Abstract A fundamental challenge of the German energy transition is the energy supply of industrial and chemical parks based on renewable energy. Presently, the energy demand of a chemical park with one third electricity and two thirds heat as a rough estimate is commonly supplied by a heat-controlled fossil fired combined heat and power (CHP) plant. If applicable, the surplus electricity generated by such plants is sold and fed into the grid. Since the reliable energy supply of all users and facilities is priority, energy storage can be incorporated, if fluctuating renewable energy sources shall be used. This paper presents energy supply concepts without adjustments to the industrial park infrastructure or the processes themselves and proposes utilization of high temperature thermal energy storage (TES) technologies such as molten-salt, as well as power-to-heat (PtH) technology in the central CHP supply infrastructure. The objective of this study is to identify the major possibilities for integrating TES in a future energy supply system for an industrial park in Germany. It shall be shown how the flexibility of an utility supplier can be increased, so that further revenue can be generated from participating in the energy market. For this task different concepts will be proposed and applicable TES technologies will be identified. The benefits for the utility supplier and how carbon dioxide reduction and integration of renewable energies can be achieved will be highlighted. Finally, an overview of concepts with additional TES and PtH components for the energy supply of industrial or chemical parks in Germany is presented qualitatively. This overview includes the following criteria: flexibility, carbon dioxide reduction and the increased use of CHP. Overall a better understanding of potential flexibility measures for the utility supply infrastructure in the chemical industry is generated.

Abstract To improve food security a conceptual integration beyond the scope of production in the agricultural sector due to examination of critical supply chain system compartments and levels of services (“integrated food production and supply systems”) is proposed. For creating systematic results, a platform integrating various perspectives of experts has been established following the principle of triple helix stakeholdership (business practice, public management/policy and also science). During a series of workshops, the main actors, success factors, challenges and communication strategies have been identified for shaping sustainable food supply chains under use of systems thinking and the application of Participatory Systems mapping (PSM). In this line, the paper presents how “system maps” based on the method of PSM are used to gain insights into sustainable logistics services facilitating sustainable consumption patterns, enabling participatory considerations and the productive exchange of knowledge.

Abstract As a representation of smart and green city development, bike-sharing system is one of the hottest topic in the fields of transportation, public health, urban planning, and so on. With the development of Mobility as a Service (MaaS), emerging technologies such as mobile data mining give some new solutions for optimizing bike-sharing system and predicting the emission reduction. Here, we propose a bike-sharing layout optimization and emission reduction potential analysis structure under the concept of MaaS. A human travel mode detection method and a geometry-based probability model are proposed to support the particle swarm optimization process. We implement a comparison study to analyze the computational efficiency. Taking Setagaya ward, Tokyo as the study case with about 3 million GPS trajectories, the result shows that with the increase of station number from 30 to 90, the adoption of bike-sharing system can reduce about 3.1-3.8 thousand tonnes of CO2 emission.

Abstract Meeting the heat demand of all customers attached, is the main objective for the operation of district heating (DH) systems combined with combined heat and power (CHP) plants. On the other hand, the economic ratification for the operation of CHP plants strongly depends on highly volatile electricity prices on the market. This trend will be reinforced in future, due to the additional integration and exploitation of renewable energies. Within this techno-economic field of most different operational objectives, DH systems and CHP plants must find a way for a cost-covering and efficient operation in future. Against this background, time shifts in producing and allocating heat supplied in parallel with electricity, are most attractive for DH system and CHP plant operators. Thus, margins on the electricity market could be maximized. On the other hand, heat amounts produced in parallel should be decoupled from the production of electricity as efficient as possible. Thus, thermal energy storages enter the limelight of interest for DH system operators. However, aspects concerning most different mechanisms for energetic and exergetic losses have to be considered for an optimized operation of these systems. Within this paper, the energetic and exergetic performance of sensible thermal storages will be examined. Underlying loss mechanisms of typical urban thermal storages are described qualitatively and quantified energetically and exergetically. For this purpose, existing models from literature are combined with practically relevant operational parameters for simulations.