• Energy Research
• Restricted close
• Embargo close
• other engineering and technologies close
• DK close

To substantiate and structure demand-side flexibility aggregation, a legally binding contract between aggregator and consumers is key. Flexibility contracts are the focus of this work.

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

Operational intelligence in electric power systems is focused in a small number of control rooms that coordinate their actions. A clear division of responsibility and a command hierarchy organize system operation. With multi-agent based control systems, this control paradigm may be shifted to a more decentralized open-access collaboration control paradigm. This shift cannot happen at once, but must fit also with current operation principles. In order to establish a scalable and transparent system control architecture, organizing principles have to be identified that allow for a smooth transition. This paper presents a concept for the representation and organization of control- and resource-allocation, enabling computational reasoning and system awareness. The principles are discussed with respect to a recently proposed Subgrid operation concept.

A three-dimensional, computational fluid dynamics (CFD) model of a PEM fuel cell is presented. The model consists of straight channels, porous gas diffusion layers, porous catalyst layers and a membrane. In this computational domain, most of the transport phenomena which govern the performance of the PEM fuel cell are dealt with in detail. The model solves the convective and diffusive transport of the gaseous phase in the fuel cell and allows prediction of the concentration of the species present. A special feature of the model is a method that allows detailed modelling and prediction of electrode kinetics. The transport of electrons in the gas diffusion layer and catalyst layer is accounted for, as well as the transport of protons in the membrane and catalyst layer. This provides the possibility of predicting the three-dimensional distribution of the activation overpotential in the catalyst layer. The current density dependency on the gas concentration and activation overpotential can thereby be addressed. The proposed model makes it possible to predict the effect of geometrical and material properties on the fuel cell’s performance. It is shown how the ionic conductivity and porosity of the catalyst layer affects the distribution of current density and further how this affects the polarization curve. The porosity and conductivity of the catalyst layer are some of the most difficult parameters to measure, estimate and especially control. Yet the proposed model shows how these two parameters can have significant influence on the performance of the fuel cell. The two parameters are shown to be key elements in adjusting the three-dimensional model to fit measured polarization curves. Results from the proposed model are compared to single cell measurements on a test MEA from IRD Fuel Cells.

The paper presents a computational fluid dynamics (CFD) analysis of a 33 MW straw-fired grate boiler. Combustion on the grate plays akey-role in the analysis of these boilers and in this work a stand-alone code was used to provide inlet conditions for the CFD analysis. Modelpredictions were compared with available gas temperature and species concentration measurements showing good agreement. Combustionof biomass in grate-based boilers is often associated with high emission levels and relatively high amounts of unburnt carbon in the fly ash.Based on the CFD analysis, it is suggested that poor mixing in the furnace is a key issue leading to these problems. q 2003 Elsevier Ltd. All rights reserved. Udgivelsesdato: JUN

The potential of offshore wind energy has been commonly recognized and explored globally. Many countries have implemented and planned offshore wind farms to meet their increasing electricity demands and public environmental appeals, especially in Europe. With relatively less space limitation, an offshore wind farm could have a capacity rating to hundreds of MWs or even GWs that is large enough to compete with conventional power plants. Thus the impacts of a large offshore wind farm on power system operation and security should be thoroughly studied and understood. This paper investigates the impacts of integrating a large-scale offshore wind farm into the transmission system of a power grid through VSC-HVDC connection. The concerns are focused on steady-state voltage stability, dynamic voltage stability and transient angle stability. Simulation results based on an exemplary power system are presented and analyzed.

This paper presents a control method based on active disturbance rejection control (ADRC) for both the primary and secondary control layers in a hybrid DC/AC microgrid (MG). A DC bus inside MG includes a wind turbine generator, photovoltaic panels, a fuel cell and battery energy storage. Maintaining the DC link voltage under various scenarios is made possible by applying an energy management system (EMS) based on the deviation in the state of charge of the battery and using a fuel cell as a backup. Through a voltage source inverter, the DC bus of the MG is connected to the AC side, which supplies AC loads. Using the proposed ADRC-based control strategy for the inverter, the voltage, frequency, and power flow within the MG would be effectively controlled. In order to demonstrate the effectiveness of the proposed method, a comparison between the ADRC and PI controller has also been implemented in different scenarios, proving the superiority of the suggested controller over classical approaches.

The recommended power quality (PQ) indices in electric power systems are defined based on the discrete Fourier transform (DFT). DFT is mostly evaluated applying fast Fourier transform (FFT) algorithm which requires signals to be periodic in nature. Hence, it evaluates PQ indices accurately for stationary PQ disturbances only. However, in case of nonstationary PQ disturbances signal is aperiodic and FFT results in erroneous assessment due to spectral leakage phenomena. Furthermore, FFT cannot provide time information of the PQ indices as computation is performed in frequency domain only. Which is significant shortcoming of the FFT when dealing with time-varying PQ disturbances to extract dynamic signature of the signal. Thereby, this paper presents a framework of redefining PQ indices for stationary and nonstationary PQ disturbances employing time-frequency distribution (TFD) method. Among all TFDs, reduced interference distribution (RID) represents the most suitable properties for analyzing time-varying PQ disturbances. Hence, in this work, it is employed to reformulate PQ indices typically used in electric power systems. The results of two synthetic examples considering stationary and nonstationary PQ disturbances imply that the RID-based redefined PQ indices are closer to the actual values. Also, they provide more accurate results than the existing transient PQ indices and traditional FFT-based method.