• Energy Research
• other engineering and technologies close
• 13. Climate action close
• 3. Good health close
• DK close

Abstract The use of photovoltaic solar power generation is rising as worldwide energy demand increases. Therefore, reliability, safety, life cycle, and improved efficiency of photovoltaic plants have all become a major concern in research nowadays. In this context, monitoring systems are necessary to guarantee the required operating productivity and to avoid overpriced maintenance costs. This paper studies the non-ideal operating conditions for grid-connected photovoltaic plants and proposes an anomaly detection methodology that combines the advantages of the 2-sigma, short-window simple-moving average control charts with shading strength and irradiance transition parameters to detect early deviation in photovoltaic plant operational data. The key aspect of proposed methodology is that it requires neither historical data for model training procedure nor parameters from previous simulation. Only instantaneous meteorological and electrical parameters are required. The efficiency of the condition monitoring methodology has been validated through experimental results conducted in actual operating conditions. Results demonstrated that the proposed methodology is effective to identify non-ideal operating conditions for grid-connected photovoltaic plants, i.e., (i) normal operating condition, (ii) natural dynamic shading, (iii) artificial dynamic shading, and (iv) artificial static shading. Moreover, a low-cost and non-invasive internet-of-things-based embedded architecture is proposed to monitor photovoltaic plant operation in real-time.

Abstract For Solid Oxide Fuel Cells (SOFCs) to become an economically attractive energy conversion technology, suitable materials and structures which enable operation at lower temperatures, while retaining high cell performance, must be developed. Recently, the perovskite-type La 0.6 Ca 0.4 Fe 0.8 Ni 0.2 O 3 oxide has shown potential as an intermediate temperature SOFC cathode. An equivalent circuit describing the cathode polarization resistances was constructed from analyzing impedance spectra recorded at different temperatures in oxygen. A competitive electrode polarization resistance is reported for this oxygen electrode using a Ce 0.8 Gd 0.2 O 1.9 electrolyte, determined by impedance spectroscopy studies of symmetrical cells sintered at 800 °C and 1000 °C. Scanning electron microscopy (SEM) studies of the symmetrical cells revealed the absence of any reaction layer between cathode and electrolyte, and a porous electrode microstructure even when sintered at a temperature of only 800 °C. The performance of this cathode shows favorable oxygen reduction reaction (ORR) properties potentially making it an excellent choice for IT-SOFC application.

This paper analyses the impact of postponing global mitigation action on abatement costs and energy systems changes in China and India. It compares energy-system changes and mitigation costs from a global and two national energy-system models under two global emission pathways with medium likelihood of meeting the 2 °C target: a least-cost pathway and a pathway that postpones ambitious mitigation action, starting from the Copenhagen Accord pledges. Both pathways have similar 2010–2050 cumulative greenhouse gas emissions. The analysis shows that postponing mitigation action increases the lock-in in less energy efficient technologies and results in much higher cumulative mitigation costs. The models agree that carbon capture and storage (CCS) and nuclear energy are important mitigation technologies, while the shares of biofuels and other renewables vary largely over the models. Differences between India and China with respect to the timing of emission reductions and the choice of mitigation measures relate to differences in projections of rapid economic change, capital stock turnover and technological development. Furthermore, depending on the way it is implemented, climate policy could increase indoor air pollution, but it is likely to provide synergies for energy security. These relations should be taken into account when designing national climate policies.

Abstract Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 °C and for some experiments also at 37 °C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497, 487, 561, 582, 575, 359, 619 dm 3 kg −1 respectively, corresponding to 50–100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm −3 and 7 g N dm −3 respectively. Pretreatment (pasteurization: 70 °C, sterilization: 133 °C, and alkali hydrolysis (NaOH) had no effect on achieved methane yields. Mesophilic digestion was more stable than thermophilic digestion, and higher methane yield was noticed at high waste concentrations. The lower yield at thermophilic temperature and high waste concentration was due to ammonia inhibition. Co-digestion of 5% pork by-products mixed with pig manure at 37 °C showed 40% higher methane production compared to digestion of manure alone.

Over the past decades, climate change has accelerated the deterioration of heritage sites and archaeological resources in Arctic and subarctic landscapes. At the same time, increased tourism and growing numbers of site visitors contribute to the degradation and manipulation of archaeological sites. This situation has created an urgent need for new, quick, and non-invasive tools and methodologies that can help cultural heritage managers detect, monitor, and mitigate vulnerable sites. In this context, remote sensing and the applications of UAVs could play an important role. Here, we used a drone equipped with an RGB camera and a single multispectral/thermal camera to test different possible archeological applications at two well-known archaeological sites in the UNESCO World Heritage area of Kujataa in south Greenland. The data collected were used to test the potential of using the cameras for mapping (1) ruins and structures, (2) the impact of human activity, and (3) soil moisture variability. Our results showed that a combination of RGB and digital surface models offers very useful information to identify and map ruins and structures at the study sites. Furthermore, a combination of RGB and NDVI maps seems to be the best method to monitor wear and tear on the vegetation caused by visitors. Finally, we tried to estimate the surface soil moisture content based on temperature rise and the Temperature Vegetation Dryness Index (TVDI), but did not achieve any meaningful connection between TVDI and on-site soil moisture measurements. Ultimately, our results pointed to a limited archaeological applicability of the TVDI method in Arctic contexts.

Abstract Switzerland has voted for a gradual nuclear phase-out, starting in 2019 with the decommissioning of a first nuclear reactor; however, there is still a debate about how the country will replace nuclear generation. Electricity markets are transitioning towards renewable sources such as hydro, wind and solar. The latter two could produce a mismatch between demand and supply. Combining renewables with storage is one way to address this challenge. This paper analyzes the feasibility of 100% renewable generation in Switzerland. We consider hydro and PV generation, combined with pumped hydro storage, to address the timing problem between demand and PV generation. We explore several combinations of installed solar capacity, reservoir levels and pumping capacity. Our findings indicate that given current technological development, Switzerland would need to double its pumping capacity, increase solar generation capacity by a factor between 13 and 25, while increasing reservoir size up to 100% depending on the installed solar capacity.

Abstract Biomass is an important renewable energy source that holds large potential as feedstock for the production of different energy carriers in a context of sustainable development, peak oil and climate change. In developing countries, biomass already supplies the bulk of energy services and future use is expected to increase with more efficient applications, such as the production of biogas and liquid biofuels for cooking, transportation and the generation of power. The aim of this study is to establish the amount of Ghana's energy demand that can be satisfied by using the country's crop residues, animal manure, logging residues and municipal waste. The study finds that the technical potential of bioenergy from these sources is 96 PJ in 2700 Mm3 of biogas or 52 PJ in 2300 ML of cellulosic ethanol. The biogas potential is sufficient to replace more than a quarter of Ghana's present woodfuel use. If instead converted to cellulosic ethanol, the estimated potential is seven times the estimated 336 ML of biofuels needed to achieve the projected 10% biofuels blends at the national level in 2020. Utilizing the calculated potentials involves a large challenge in terms of infrastructure requirements, quantified to hundreds of thousands of small-scale plants.

Abstract Industry is one of the highest energy consumption sector: some facilities like steelworks, foundries, or paper mills are highly energy-intensive activities. Many countries have already implemented subsidies on energy efficiency in generation and utilisation, with the aim of decreasing overall consumption and energy intensity of gross domestic product. Meanwhile, researchers have increased interest into alternative energy systems to decrease pollution and use of fossil fuels. Hydrogen, in particular, is proposed as a clean alternative energy vector, as it can be used as energy storage mean or to replace fossil fuels, e.g. for transport. This work analyses the re-vamping of the energy generation system of a paper mill by means of reversible solid oxide cells (RSOCs). The aim is not only to increase efficiency on energy generation, but also to create a polygeneration system where hydrogen is produced. Application on a real industrial facility, based in Italy with a production capacity of 60000 t/y of paper, is analysed. First, the current energy system is studied. Then, a novel system based on RSOC is proposed. Each component of the systems (both existing and novel) is defined using operational data, technical datasheet, or models defined with thermodynamic tools. Then, the interaction between them is studied. Primary energy analysis on the novel system is performed, and saving with respect to the current configuration is evaluated. Even if the complexity of the system increases, results show that saving occurs between 2 and 6%. Hydrogen generation is assessed, comparing the RSOC integrated system with proton exchange membrane (PEM) electrolysis, in terms of both primary energy and economics. Results exhibit significant primary energy and good economic performance on hydrogen production with the novel system proposed (hydrogen cost decreases from 10 €/kg to at least 8 €/kg).