• Energy Research
• 7. Clean energy close
• 11. Sustainability close
• 2. Zero hunger close
• 1. No poverty close
• IT close
• EU close

This paper presents a tradeoff analysis in terms of accuracy and computational cost between different architectures of artificial neural networks for the State of Charge (SOC) estimation of lithium batteries in hybrid and electric vehicles. The considered layouts are partly selected from the literature on SOC estimation, and partly are novel proposals that have been demonstrated to be effective in executing estimation tasks in other engineering fields. One of the architectures, the Nonlinear Autoregressive Neural Network with Exogenous Input (NARX), is presented with an unconventional layout that exploits a preliminary routine, which allows setting of the feedback initial value to avoid estimation divergence. The presented solutions are compared in terms of estimation accuracy, duration of the training process, robustness to the noise in the current measurement, and to the inaccuracy on the initial estimation. Moreover, the algorithms are implemented on an electronic control unit in serial communication with a computer, which emulates a real vehicle, so as to compare their computational costs. The proposed unconventional NARX architecture outperforms the other solutions. The battery pack that is used to design and test the networks is a 20 kW pack for a mild hybrid electric vehicle, whilst the adopted training, validation and test datasets are obtained from the driving cycles of a real car and from standard profiles.

This paper investigates the impact of the standard approximations embodied in the well-known Momentum Theory on its performance prediction capabilities. To this aim, the results of the momentum theory, which is still widely used in all Blade Element/Momentum codes for the analysis and/or design of wind turbines, are compared with those obtained with an actuator disk model based on Computational Fluid Dynamics techniques. In this method, the axisymmetric and steady Euler equations are solved with a classical finite volume approach, while the turbine effects are modelled through a set of axial and tangential body forces distributed over a disk shaped region representing the rotor swept surface. Since this method does not rely on the momentum theory simplifying assumptions, it can be suitably employed to verify the momentum theory validity. The analysis is carried out using the well documented experimental data of the National Renewable Energy Laboratory Phase VI wind turbine.

In the current situation with the unprecedented deployment of clean technologies for electricity generation, it is natural to expect that storage will play an important role in electricity networks. This paper provides a qualitative methodology to select the appropriate technology or mix of technologies for different applications. The multiple comparisons according to different characteristics distinguish this paper from others about energy storage systems. Firstly, the different technologies available for energy storage, as discussed in the literature, are described and compared. The characteristics of the technologies are explained, including their current availability. In order to gain a better perspective, availability is cross-compared with maturity level. Moreover, information such as ratings, energy density, durability and costs is provided in table and graphic format for a straightforward comparison. Additionally, the different electric grid applications of energy storage technologies are described and categorised. For each of the categories, we describe the available technologies, both mature and potential. Finally, methods for connecting storage technologies are discussed.

-

Abstract Longer term monitoring of soil water content at a catchment scale is a key to understanding its dynamics, which can assist stakeholders in decision making processes, such as land use change or irrigation programs. Soil water monitoring in agriculturally dominated catchments can help in developing soil water retention measurements, for assessment of land use change, or adaptation of specific land management systems to climate change. The present study was carried out in the Pannonian region (Upper-Balaton, Hungary) on Cambisols and Calcisols between 2015 and 2021. Soil water content (SWC) dynamics were investigated under different land use types (vineyard, grassland, and forest) at three depths (15, 40, and 70 cm). The meteorological data show a continuous decrease in cumulative precipitation over time during the study with an average of 26% decrease observed between 2016 and 2020, while average air temperatures were similar for all the studied years. Corresponding to the lower precipitation amounts, a clear decrease in the average SWC was observed at all the land use sites, with 13.4%, 37.7%, and 29.3% lower average SWC for the grassland, forest, and vineyard sites, respectively, from 2016 to 2020 (measured at the 15 cm depth of the soil). Significant differences in SWC were observed between the annual and seasonal numbers within a given land use (p < 0.05). The lowest average SWC was observed at the grassland (11.7%) and the highest at the vineyard (28.3%). The data showed an increasing average soil temperature, with an average 6.3% higher value in 2020 compared to 2016. The grassland showed the highest (11.3 °C) and the forest soil the lowest (9.7 °C) average soil temperatures during the monitoring period. The grassland had the highest number of days with the SWC below the wilting point, while the forest had the highest number of days with the SWC optimal for the plants.

Dielectric and anelastic spectroscopies are complementary techniques and their combination allows valuable information to be obtained in the field of multifunctional materials. Whereas the dielectric spectroscopy measures the dielectric susceptibility ?(?,T) and it is sensitive to fluctuations of electric dipoles, the anelastic spectroscopy measures the elastic compliance or elastic susceptibility s(?,T) and it is sensitive to fluctuations of elastic dipoles. Both susceptibilities are complex, their immaginary part being due to the delayed response of the mobile defects coupled to the electric field/stress. The great advantage of using a combination of both techniques is that the anelastic measurements are insensitive to free charges, therefore it is possible to measure the dynamics of ions also in the presence of free charges. Two main types of investigations have been pursued by the combination of these techniques: the study of structural phase transitions and the study of microscopic mechanisms associated with the presence of defects, both important for the knowledge and development of multifunctional materials. We have applied this approach for different functional materials with perovskite framework: multiferroic, ferroelectric and relaxor ferroelectric ceramics, and organic-inorganic perovskite photovoltaics. Thanks to the combination of the two spectroscopies, it has been possible to probe more accurately the structural transitions involving the antiferrodisortive tilt modes of the octahedra in PZT [1] and NBT-BT [2]. It was also possible to evidence incipient phase separation in lead titanate-based multiferroics [3]. Moreover, since the elastic response is insensitive to free charges, it has been used to probe the piezoelectric response even in unpoled ceramics [4] and for the study of coexisting ferroelectric and metallic states [5]. The combination of the two techniques allowed also new features to be revealed on the reorientation dynamics of the organic molecules in MAPbI3 photovoltaic organic-inorganic perovskites and the hindrance of their ferroelectric order by coupling with the tilt modes [6]. 1. F. Cordero, F. Trequattrini, F. Craciun, C. Galassi, Phys. Rev. B, 87 (2013) 094108 2. F. Cordero, F. Craciun, F. Trequattrini, et al., Phys. Rev. B, 81 (2010) 144124 3. F. Craciun, F. Cordero, B. Vasile, et al., Phys. Chem. Chem. Phys., 20 (2018) 14652 4. F. Cordero, F. Craciun, F. Trequattrini, C. Galassi, Phys. Rev. B, 93 (2016) 174111 5. F. Cordero, F. Trequattrini, F. Craciun, et al., Phys. Rev. B, 99 (2019) 064106 6. F. Cordero, F. Craciun, F. Trequattrini, et al., J. Phys. Chem. Lett., 9 (2018) 4401

Dolomite-based binders are characterised by interesting technical and environmental features. For their synthesis, sources of both CaO and MgO are required. The idea developed in this work is to couple the synthesis of dolomite-based binders, starting from a natural dolomite, through the concept of concentrated solar energy (needed to drive the endothermal dolomite calcination process) in fluidised bed reactors. To this end, a fluidised bed system, where the concentrated solar radiation is mimicked by the use of Xe-lamps (short-arc), has been set up and operated. Natural dolomite (sieved in the 420-590 ?m size range) was calcined at a nominal temperature of 850 °C, and bed temperature profiles during solar-driven calcination were investigated. Then, four binders were prepared by mixing slaked dolomite (obtained from the hydration of solar calcined dolomite) with either blast furnace slag or coal fly ash as supplementary cementitious materials. The binders were hydrated for curing times ranging from 7 to 56 days. X-ray fluorescence, X-ray diffraction and combined differential thermal and thermogravimetric analyses were employed as characterisation techniques both to analyse the chemical composition of starting materials and to investigate the evolution of the hydration in the four systems.

Pervasive computing and business process modeling are increasingly joining forces, as mobile human users shall be seamlessly integrated into business processes. In respective scenarios, humans use mobile devices and wireless technology to interact with workflows running in a powerful back-end infrastructure. However, the frequent interaction between humans and workflows causes a high communication overhead and, thus, high energy consumption on mobile devices. This impacts the usability and efficiency of the business process due to rapidly drained batteries and the resulting short life-times of the devices and applications. We present an approach based on a minimum-cut algorithm for reducing costly data transmissions during workflow execution by distributing parts of a workflow to the users' devices. Our motivation is to reduce the energy consumption on the mobile devices and, thus, avoid draining batteries in the field. We prove that our algorithm finds the optimal solution for a given network and workflow, decreasing the energy consumed on mobile devices by 32-37% compared to an approach where the entire workflow is executed in the infrastructure. Thus, in typical domains like logistics and health care, one third of the energy can be saved. This either means that devices have to be charged less frequently, leading to less distraction in the business process, or that mobile device specifications can be lowered. Significant cost reductions result in both cases.

After a halt of four years, the n TOF spallation neutron facility at CERN has resumed operation in November 2008 with a new spallation target characterized by an improved safety and engineering design, resulting in a more robust overall performance and e cient cooling. The rst measurement during the 2009 run has aimed at the full characterization of the neutron beam. Several detectors, such as calibrated ssion chambers, the n TOF Silicon Monitor, a Mi- croMegas detector with 10B and 235U samples, as well as liquid and solid scintillators have been used in order to characterize the properties of the neutron uence. The spatial pro le of the beam has been studied with a specially designed \X-Y