• Energy Research
• Closed Access close
• 11. Sustainability close
• 2. Zero hunger close
• 1. No poverty close
• IT close
• EU close

According to the renewable energy directive 2009/28/EC, the European Union Member States should increase by 2020 the use of renewable energy to 20% of gross final energy consumption and to reach a mandatory share of 10% renewable energy in the transport sector. This study aims to quantify the impact of 2020 bioenergy targets on the land use in the EU, based on the projections of the National Renewable Action Plans in four scenarios: Scenario 1. Bioenergy targets according to NREAPs; Scenario 2. Bioenergy targets according to NREAPs, no second generation biofuels; Scenario 3. Bioenergy targets according to NREAPs, reduced import of biofuels and bioliquids; Scenario 4. Bioenergy targets according to NREAPs, high imports of biofuels and bioliquids. This study also considers the credit for co-products generated from biofuel production. The analysis reveals that the land used in the EU for bioenergy would range between 13.5 Mha and 25.2 Mha in 2020. This represent between 12.2% and 22.5% of the total arable land used and 7.3% and 13.5% of the Utilised Agricultural Area (UAA). In the NREAPS scenario, about 17.4 Mha would be used for bioenergy production, representing 15.7% of arable land and 9.4% of UAA. The increased demand from biofuels would lead to an increased generation of co-products, replacing conventional fodder for animal feed. Considering the co-products, the land used for bioenergy would range between 8.8 Mha and 15.0 Mha in 2020 in the various scenarios. This represent between 7.9% and 13.3% of the total arable land used in the EU and 4.7% and 8.0% of the UAA. In the NREAPS scenario, when co-products are considered, about 10.3 Mha would be used for biofuels, bioliquids and bioenergy production, representing 9.3% of arable land and 5.6% of agricultural land. This study further provides detailed data on the impact on land use in each Member State.

According to the renewable energy directive 2009/28/EC, the European Union Member States should increase by 2020 the use of renewable energy to 20% of gross final energy consumption and to reach a mandatory share of 10% renewable energy in the transport sector. This study aims to quantify the impact of 2020 bioenergy targets on the land use in the EU, based on the projections of the National Renewable Action Plans in four scenarios: Scenario 1. Bioenergy targets according to NREAPs; Scenario 2. Bioenergy targets according to NREAPs, no second generation biofuels; Scenario 3. Bioenergy targets according to NREAPs, reduced import of biofuels and bioliquids; Scenario 4. Bioenergy targets according to NREAPs, high imports of biofuels and bioliquids. This study also considers the credit for co-products generated from biofuel production. The analysis reveals that the land used in the EU for bioenergy would range between 13.5 Mha and 25.2 Mha in 2020. This represent between 12.2% and 22.5% of the total arable land used and 7.3% and 13.5% of the Utilised Agricultural Area (UAA). In the NREAPS scenario, about 17.4 Mha would be used for bioenergy production, representing 15.7% of arable land and 9.4% of UAA. The increased demand from biofuels would lead to an increased generation of co-products, replacing conventional fodder for animal feed. Considering the co-products, the land used for bioenergy would range between 8.8 Mha and 15.0 Mha in 2020 in the various scenarios. This represent between 7.9% and 13.3% of the total arable land used in the EU and 4.7% and 8.0% of the UAA. In the NREAPS scenario, when co-products are considered, about 10.3 Mha would be used for biofuels, bioliquids and bioenergy production, representing 9.3% of arable land and 5.6% of agricultural land. This study further provides detailed data on the impact on land use in each Member State.

Abstract The central role of occupants for achieving energy savings in residential buildings is increasingly recognised. Simulation programmes able to take into account occupant behaviour are considered to be powerful tools for bridging the gap between the predicted and the actual energy consumption for new buildings. Nevertheless, the majority of residential buildings that will constitute the housing stock in 2050 have already been built today, therefore occupant behaviour and building simulation tools need to be fully exploited for supporting the renovation of existing housing stock. The aim of this paper is to explore the role of occupant behaviour modelling in supporting decision-makers dealing with the design of renovation strategies for residential buildings. An Italian multi-family public housing building is assumed as case study to estimate the influence of three dimensions linked with occupant behaviour – management of the thermostat, management of the heating system, variation of building characteristics – on energy heating consumption. The results show that, while the occupant behaviour influences the heating loads up to 1/3 in case of high level of building retrofit, the less the building is renovated, the higher is the behavioural impact in absolute terms of energy reduction. Therefore, in order to be effective, renovation strategies are required to design appropriate informative instruments at an early stage to support behaviour changes towards responsible energy consumption.

Abstract The central role of occupants for achieving energy savings in residential buildings is increasingly recognised. Simulation programmes able to take into account occupant behaviour are considered to be powerful tools for bridging the gap between the predicted and the actual energy consumption for new buildings. Nevertheless, the majority of residential buildings that will constitute the housing stock in 2050 have already been built today, therefore occupant behaviour and building simulation tools need to be fully exploited for supporting the renovation of existing housing stock. The aim of this paper is to explore the role of occupant behaviour modelling in supporting decision-makers dealing with the design of renovation strategies for residential buildings. An Italian multi-family public housing building is assumed as case study to estimate the influence of three dimensions linked with occupant behaviour – management of the thermostat, management of the heating system, variation of building characteristics – on energy heating consumption. The results show that, while the occupant behaviour influences the heating loads up to 1/3 in case of high level of building retrofit, the less the building is renovated, the higher is the behavioural impact in absolute terms of energy reduction. Therefore, in order to be effective, renovation strategies are required to design appropriate informative instruments at an early stage to support behaviour changes towards responsible energy consumption.

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configurations (heat gasifier and power gasifier) and the environmental performances of the main commercially available gasifiers for municipal solid wastes. The analysis indicates that gasification is a technically viable option for the solid waste conversion, including residual waste from separate collection of municipal solid waste. It is able to meet existing emission limits and can have a remarkable effect on reduction of landfill disposal option.

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configurations (heat gasifier and power gasifier) and the environmental performances of the main commercially available gasifiers for municipal solid wastes. The analysis indicates that gasification is a technically viable option for the solid waste conversion, including residual waste from separate collection of municipal solid waste. It is able to meet existing emission limits and can have a remarkable effect on reduction of landfill disposal option.

This article concerns a field study about the use of non-invasive manual lighting and shading control to save energy in listed buildings. The system was chosen to limit cabling and masonry work. The test room consists of an individual office located in a historical building in Southern Italy. The room was retrofitted with two roller shades (semi-transparent and blackout) and six LED-based pendants provided with step-dimming and three Correlated Colour Temperature options. Shading and lighting could be remotely controlled from the desk by six subjects who took part in the test for two weeks each. Behavioural interventions and a set back to default setting at the end of the working day were adopted to improve the test subjects’ energy behaviour. The results show that energy for lighting could be reduced between 15% and 71% compared to European benchmark, with wide range accounting for variability of individual preference and weather conditions. The savings are due to the computer-based work, the communication and engagement campaign, as well as the default settings. The findings suggest that simple manually controlled systems are energy and economic viable solution for listed buildings, since the system accommodates users’ needs, and proper training is provided to the users.

This article concerns a field study about the use of non-invasive manual lighting and shading control to save energy in listed buildings. The system was chosen to limit cabling and masonry work. The test room consists of an individual office located in a historical building in Southern Italy. The room was retrofitted with two roller shades (semi-transparent and blackout) and six LED-based pendants provided with step-dimming and three Correlated Colour Temperature options. Shading and lighting could be remotely controlled from the desk by six subjects who took part in the test for two weeks each. Behavioural interventions and a set back to default setting at the end of the working day were adopted to improve the test subjects’ energy behaviour. The results show that energy for lighting could be reduced between 15% and 71% compared to European benchmark, with wide range accounting for variability of individual preference and weather conditions. The savings are due to the computer-based work, the communication and engagement campaign, as well as the default settings. The findings suggest that simple manually controlled systems are energy and economic viable solution for listed buildings, since the system accommodates users’ needs, and proper training is provided to the users.

A procedure for the design of an aerobic cometabolic process for the on-site degradation of chlorinated solvents in a packed bed reactor was developed using groundwater from an aquifer contaminated by trichloroethylene (TCE) and 1,1,2,2-tetrachloroethane (TeCA). The work led to the selection of butane among five tested growth substrates, and to the development and characterization from the site's indigenous biomass of a suspended-cell consortium capable to degrade TCE (first order constant: 96 L gprotein(-1) day(-1) at 30 °C and 4.3 L gprotein(-1) day(-1) at 15 °C) with a 90 % mineralization of the organic chlorine. The consortium immobilization had strong effects on the butane and TCE degradation rates. The microbial community structure was slightly changed by a temperature shift from 30 to 15 °C, but remarkably affected by biomass adhesion. Given the higher TCE normalized degradation rate (0.59 day(-1) at 15 °C) and attached biomass concentration (0.13 gprotein Lbioreactor(-1) at 15 °C) attained, the porous ceramic carrier Biomax was selected as the best option for the packed bed reactor process. The low TeCA degradation rate exhibited by the developed consortium suggested the inclusion of a chemical pre-treatment based on the TeCA to TCE conversion via β-elimination, a very fast reaction at alkaline pH. To the best of the authors' knowledge, this represents the first attempt to develop a procedure for the development of a packed bed reactor process for the aerobic cometabolism of chlorinated solvents.