• Energy Research
• 11. Sustainability close
• 2. Zero hunger close
• 1. No poverty close
• EU close
• IT close
• English close

The SBE19 Brussels - BAMB-CIRCPATH "Building as Material Banks - A Pathway for a Circular held in Brussels on 5 to 7 of February 2019, is an initiative of the Consortium of the H2020 BAMB Project together with the Sustainable Built Environment (SBE) series of conferences. Being within the SBE series, this event gathers the support of CIB International Council for Research and Innovation in Building and Construction, iiSBE International Initiative for a Sustainable Built Environment, the United Nations Environment Programme, and FIDIC International Federation of Consulting Engineers. The goal of this series of regional and international conferences is to disseminate innovative policies and developments in the field of sustainable urban environment to a broad international audience of specialists in policy, design, construction and operation of buildings and related infrastructure. info:eu-repo/semantics/publishedVersion

This Milestone, namely M3.3, is part of Task 3.3 “Downscaling of future climate projections at the case-study scale and their transfer to the Partners”. The aim of M3.3 is to outline the results of the climate change evaluation over the investigated pilot sites. For the future projections of the climate variables (precipitation and temperature), the data provided by EURO-CORDEX initiative under two emission scenarios (RCP4.5 and RCP8.5) are used. The main information on the pilot sites, available data, analyses and results are presented. The data are freely downloadable from the web repository https://doi.org/10.5281/zenodo.7247977. This project is part of the PRIMA Programme supported by the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No 1923.

This work has been developed under the AGROinLOG Project, “Demonstration of innovative integrated biomass logistics centres for the Agro-industry sector in Europe”. An Integrated Biomass Logistics Center (IBLC), is based on the introduction of new production chains into existing agro-industries by using new biomass feedstock. The AGROinLOG Project has dedicated great attention to investigate the potential of cereal chaff as a valuable resource.Chaff is the fine fraction of the thrashing residues, not usually collected. Chaff is made up of glumes, seed husks, rachis and the tinner part of the cereal stems, whole and cracked kernels, as well as weed seeds.Currently there are several mechanical solutions available on the market for chaff recovery, and others are still at prototype stage, but theyare not so common and very often unknown to the farmers.So far, the literature reportsfew cases of chaff collection with the specific purpose of weed seeds removal, but it still lacks specificexperiments on these machinesintentionally used for biomass collection.For this reason, during the Project AGROinLOG a series of large field tests were performed using an independent scientific approach with different kind of chaff harvesting technologiesin France, Sweden and Italy from 2017 to 2019.The present study collects the results of these activities with the aim to fill that gap and provide deeper understanding in the possibility to enhance the current cereal harvesting method, in order to improve the quantity of biomass collected by including the chaff. Proceedings of the 29th European Biomass Conference and Exhibition, 26-29 April 2021, Online, pp. 62-68

The presented Report forms Deliverable D6.2 resulted from the realization of Workpackage WP.6.3 titled “Overview of market drivers, fiscal measures and subsidies” in frame of the EU-Project “Geothermal communities – demonstrating the cascaded use of geothermal energy for district heating with small scale RES integration and retrofitting measures” (GEOCOM). The following seven countries were covered by WP6.3 works and this Deliverable D6.2: o Macedonia, o Hungary, o Italy, o Poland, o Romania, o Serbia, o Slovakia. The work was done with the contribution of all GEOCOM Project Partner teams and appointed experts, coordinated, interpreted and summarized by the Mineral and Energy Economy Research Institute of PAS team, WP6 leader. FP7

The EU has set clear targets regarding energy conservation of buildings and heavily supports activities towards achieving these targets on a European scale. The Green Deal, renovation wave, Energy Performance of Buildings Directive (EPBD) and Energy Efficiency Directive (EED) are some examples of EU's actions. For more than a decade, Energy Performance Certificates provide detailed data about the current energy needs of a building/building unit as well as information about the building construction and systems. A Building Renovation Passport (BRP) has, on a European level lately, been conceived as a tool that can stimulate cost-effective renovation in the form of a long-term basis, step-by-step deep renovation roadmap following defined quality criteria, and outline energy renovation measures that will improve the energy performance of the building. A Digital Building Logbook (DBL) is another tool that can serve as an archive where all building information can be stored and continuously updated. In this way, a full record of the building history will be electronically available with data regarding construction plans and permits, maintenance and system replacement activities, energy and heat consumption and production, etc. Building Renovation Passports and the Digital Building Logbook are tools that can help in achieving energy efficiency in existing buildings and contribute to reaching the EU renovation wave goals. The objective of this report is to investigate how the current EPC schemes best make the link towards the BRP and the DBL to further incentivise and stimulate cost-effective deep energy renovations of buildings across Europe. Three surveys were carried out to collect relevant information about the current status of the EPC data records and to identify stakeholders' potential needs, perceptions, thoughts and expectations, regarding a future connection between the EPC and the BRP or DBL. These surveys were prepared in two forms: using an excel file format circulated via email, and through an online questionnaire. Their completion was carried out by 16 countries. Regarding the EPCs, the state or regional energy agencies are the owner of the EPC data records and make full use of them. Their current main usage is for statistical reasons in the majority of the countries and their access is publicly available in half of the responding countries. Many common data is stored in the EPC database which can be linked with other tools (half of the EPC databases are already linked with another source). Regarding the BRP, a review of existing European schemes showed that successful BRPs have combined the renovation advice with financial support, legal requirements and/or communication campaigns. An important factor of the BRP is that it should be issued by a qualified expert and should provide customised measures for the specific building together with the investment costs per renovation measure(s). The DBL analysis showed that it should provide access to building information and contribute to better decision-making for future interventions as well as operation, use and maintenance records. The building owner/user is proposed to have full access to the logbook and provide/input about energy bills and building plans/construction materials info. An important aspect is that every time the building undergoes intervention works, the DBL should be updated accordingly. The most important barrier is the lack of motivation to update the DBL contents followed by the absence of synergies and consistency with other tools. Another interesting finding is that both BRP and DBL should be fed automatically by EPC data without any user interference. There is a clear possible interconnection between EPC data and BRP and DBL future contents. In addition, BRP can be an instrument to increase the renovation rates and DBLs are necessary for the management of buildings' information. The linkage of EPC data and BRP and DBL can be strengthened by introducing BRP and DBL as voluntary schemes under national incentives and should be fully implemented once they have demonstrated acceptance by the stakeholders.

Bio-based and biodegradable plastics (BBPs) are innovative materials, wholly or partially produced from biomass, with the potential to enhance the circulation of resources in the biological cycle of the Ellen MacArthur Foundation’s butterfly diagram. Although BBPs are generally considered more environmental-friendly than conventional plastics, robust scientific evidence is still missing. The lack of tools and metrics to assess the circularity and sustainability of the BBPs industry poses relevant challenges for its upscaling and contribution to climate neutrality goals in Europe. It calls for adopting system and life cycle thinking, guided by multi-level and multi-dimensional examinations, which led researchers to build a comprehensive picture of trends, gaps and future orientations that may boost a sustainable circular bioeconomy in the sector. The value- chain based and multi-faceted SWOT analysis that emerged from the intersection of system and corporate data reveals the need to establish a combined circular bioeconomy strategy where incentives to integrated local supply chain, dedicated EPR scheme, eco-design guidelines, revised EoL standards, new clear labelling schemes and harmonised sustainability criteria should be prioritized and conjointly pursued to accelerate the transition towards a sustainable circular bioeconomy of the BBPs value chain. European Journal of Social Impact and Circular Economy, V. 4 N. 2 (2023)

Die Metropolregion Santiago (MRS) verzeichnete in den letzten Jahren ein großes Bevölkerungswachstum und einen Anstieg des Lebensstandards. Als Folge davon hat sich das Aufkommen von Siedlungsabfällen fast innerhalb von 10 Jahren verdoppelt. Die Daten für den aktuellen Zustand des Abfallmanagements wurden durch Feldforschungen, Fragebögen, Feldbesuche und durch eine systematische Auswertung von bereits vorliegender Literatur erhoben. Das integrative Nachhaltigkeitskonzept der Helmholtz-Gemeinschaft diente als konzeptioneller Rahmen für die Studie. Zur Bewertung des aktuellen Zustands des Abfallmanagements wurden Nachhaltigkeitsindikatoren identifiziert, deren aktuelle Werte bestimmt und Zielwerte festgelegt. Die Nachhaltigkeitsanalyse zeigt, dass die größten Defizite darin liegen, dass nahezu die gesamte Abfallmenge ohne jegliche Vorbehandlung deponiert wird. Damit verbunden sind lang andauernde Emissionen von Treibhausgasen. Um herauszufinden, wie der informelle Sektor im Abfallmanagement zur Nachhaltigkeit beiträgt, wurden veröffentlichten Erfahrungen mit informellen Müllsammlern in Lateinamerika analysiert. Dabei wurden die entsprechenden Akteure sowie etablierte Allianzen zwischen diesen Akteuren identifiziert. Schlüsselfaktoren für ein nachhaltiges Abfallmanagement unter Einbeziehung des informellen Sektors sind die Legalisierung der Schattenwirtschaft und feste Verträge mit Partnerunternehmen. Relevante Akteure für die Gestaltung der Arbeitsbedingungen des informellen Sektors sind Vertreter privater und öffentlicher Unternehmen, einzelne gesellschaftliche Gruppen sowie Vertreter von Nichtregierungsorganisationen. Schließlich wurden drei explorative Szenarien für das Bezugsjahr 2030 entwickelt: Business as Usual (BAU), Collective Responsibility (CR) und Market Individualism (MI). Das BAU-Szenario enthält eine getrennte Sammlung von Bioabfall und von Wertstoffen; hervorgerufen durch einen verstärkten Organisationsgrad der informellen Müllsammler und den Ausbau von Bring-Systemen. Die Errichtung mechanischer Sortierungsanlagen trägt zur Verwertung der Materialien und zum Recycling bei. Das entstehende Deponiegas und Biogas wird als erneuerbare Energiequelle genutzt. Das CR-Szenario enthält eine getrennte Sammlung von Bioabfall und Wertstoffen. Dies wird erreicht durch eine verstärkte Zusammenarbeit mit den jetzt organisierten Müllsammlern und durch den Ausbau von Bring-Systemen. Mechanische Sortierungsanlagen tragen zur Verwertung von Materialien und zum Recycling bei. Durch Abtrennung einer heizwertreichen Fraktion in mechanisch biologischen Anlagen werden Sekundärbrennstoffe produziert. Darüber hinaus werden, das entstehende Deponiegas sowie das in Vergärungsanlagen erzeugte Biogas energetisch genutzt. Im MI-Szenario sind Wiederverwertungsstrategien von untergeordneter Bedeutung. Es gibt kein Interesse an einer Zusammenarbeit mit den informellen Müllsammlern und keine Anreize für einen verstärkten Organisationsgrad in diesem Bereich. Deshalb bleibt die Branche weitgehend informell. Technologische Entwicklungen in diesem Szenario enthalten die mechanische Sortierung von gemischtem Abfall und die energetische Verwertung von Deponiegas. Die Ergebnisse zeigten, dass das Pro-Kopf-Aufkommen an Siedlungsabfällen im Jahr 2030 in allen Szenarien deutlich höher als im Jahr 2007 ist und der festgelegte Zielwert von 1,6 kg/Kopf/Tag nicht erreicht wurde. Den höchsten Wert (2,0 kg/Kopf/Tag) weist das MI-Szenario auf, der niedrigste Wert (1,8 kg/Kopf/Tag) wurde im CR-Szenario gefunden. Eine Vorbehandlung der gesammelten gemischten Siedlungsabfälle findet nur im CR-Szenario statt, der entsprechende Wert beträgt 18 %, der Zielwert wird damit nicht erreicht. Die höchsten Treibhausgasemissionen treten im MI-Szenario (295 kg CO2-eq/Kopf/Jahr) auf, den niedrigsten Wert (155 kg CO2-eq/Kopf/Jahr) findet man im CR-Szenario. All diese Werte sind, verglichen mit dem festgelegten Zielwert von 71 kg/Kopf/Jahr, deutlich zu hoch. Der Zielwert für die Wiederverwertungsquote wurde im CR-Szenario erreicht (43 %), den niedrigsten Wert zeigt das MI-Szenario (20 %). Die Zielwerte für das Einkommen der Müllsammler wurden im CR-Szenario erreicht (128 %). Im MI-Szenario beträgt dieser Wert lediglich 51 %. Die Kosten für das Abfallmanagement im Verhältnis zum Bruttoinlandsprodukt sinken in den drei Szenarien. Aus den Ergebnissen lässt sich ableiten, dass ein Einbeziehen von mehreren Faktoren erforderlich ist, um die Nachhaltigkeit des Abfallmanagementsystems in den drei Szenarien zu steigern und dass es von wesentlicher Bedeutung ist, schon vorhandene und gut funktionierende Subsysteme, wie das der informellen Müllsammler, zu nutzen und zu stärken. Ebenso ist die Umsetzung robuster Behandlungstechnologien, die einen Beitrag zur Reduktion negativer Umweltauswirkungen leisten, zu forcieren. Diese Technologien sollten preiswert sein, um ihren Einsatz auch unter wirtschaftlich vertretbaren Gesichtspunkten zu ermöglichen. The Metropolitan Region of Santiago (MRS) has experienced a large growth in population in recent years and a rise in the standard of living. Therefore, its municipal solid waste (MSW) has almost doubled in 10 years. Data about the current situation of MSW management in MRS were collected during field research, interviews, field visits and by a systematic evaluation of existing documentary literature. The Integrative Sustainability Concept of the Helmholtz Association provided a conceptual framework for the study. The sustainability analysis showed that the largest deficits are in the current amount of MSW deposited at sanitary landfills without any pre-treatment, and the emission values of greenhouse gases associated with waste treatment and final disposal. To find out if and how the informal waste sector contributes to sustainability, experiences of organization of informal primary collectors in Latin America were analyzed. The key factors which have an influence on their working conditions were identified. These factors include the existence of a legal framework for the informal waste sector; the existence of alliances with production companies guaranteeing a reliable industrial market for secondary raw materials and expansion of activities beyond collection of recyclables. Key stakeholders included people from the public and the private sector, from the civil society and from NGOs. Three explorative scenarios were developed for the year 2030: Business as Usual (BAU), Collective Responsibility (CR), and Market Individualism (MI). Waste generation, waste composition and different practices of waste collection, recovery and treatment were taken into account for the scenarios formulation. The BAU scenario incorporated separate collection of biowaste, recyclable materials with some participation of organized primary collectors and an expansion of drop-off systems. The mechanical sorting of mixed waste was introduced. The utilization of landfill gas as an energy source was promoted and the production of biogas in anaerobic digestion plants was implemented. The CR scenario incorporated separate collection of biowaste, commitment to work together with the primary waste collectors and an expansion of drop-off systems. The mechanical and mechanical biological treatment of mixed waste was introduced. The utilization of landfill gas as an energy source is promoted and the production of biogas in anaerobic digestion plants was implemented. In the MI separate collection of biowaste and recyclable materials was irrelevant. An organization of the informal primary collectors did not take place. Mechanical sorting of mixed waste was introduced. Utilization of landfill gas as an energy source was promoted. The results showed that the generation flux of MSW is at least 50% larger in all scenarios in 2030 compared to the year 2007, exceeding the limit value proposed. The highest value (2.0 kg/(person•day) is obtained in the MI scenario, and the lowest (1.8 kg/(person•day)) in the CR scenario. Pre-treatment of mixed MSW collected is only achieved in the CR scenario with a value of 18%, however, the target value is not achieved. The highest greenhouse gas emission value is obtained in the MI scenario with 295 kg CO2eq/(person•year), the lowest value of 155 kg CO2-eq/(person•year) is obtained in the CR scenario; a value that is still very high in comparison with the suggested target. The largest recycling rate is obtained in the CR scenario (43%), which is better than the target value proposed, the lowest recycling rate is obtained in the MI scenario (20%). The income of primary collectors in comparison with the income of one individual household is improved significantly in the CR scenario (128%), in the MI scenario, earnings of primary collectors decreased to 51%. The share of GDP spent on MSW management is lower in 2030, compared to the year 2007, in all scenarios the largest value of 0.17% is obtained in the CR scenario, and the lowest value of 0.14% is obtained in the MI scenario. The results of the evaluation of the scenarios showed that the largest sustainability deficits are the amount of mixed MSW which undergoes pre-treatment, the greenhouse gas emissions associated to MSW treatment and disposal, as well as the share of GDP spent on MSW management. The results obtained suggested that an integration of several factors is required to increase sustainability. It is essential to strengthen and take advantage of the subsystems which are working within the waste management system, as in the case of the informal sector. In addition to the implementation of flexible treatment technologies which help to decrease negative environmental impacts. Moreover, the costs of these technologies should be affordable, allowing a better financial management.

The importance of emission control has increased sharply due to increased need of energy from combustion. However, biomass utilization in energy production is not free from problems because of physical and chemical characteristics which are substantially different from conventional energy sources. In this situation, the quantity and quality of emissions as well as used renewable source as wood or corn grain are often unknown. To assess this problem the paper addresses the objectives to quantify the amount of greenhouse gases during the combustion of corn as compared to the emissions in fossil combustion (natural gas, LPG and diesel boiler). The test was carried out in Friuli Venezia Giulia in 2006-2008 to determine the air pollution (CO, NO, NO2, NOx, SO2 and CO2) from fuel combustion in the family boilers with power between 20-30 kWt. The flue gas emission was measured with a professional semi-continuous multi-gas analyzer, (Vario plus industrial, MRU air Neckarsulm-Obereisesheim). Data showed a lower emission of fossil fuel compared to corn in family boilers in reference to pollutants in the flue gas (NOx, SO2 and CO). In particular way the biomass combustion make a higher concentration of carbon monoxide (for a incomplete combustion because there aren’t a good mixing between fuel and air) and nitrogen oxides (in relation at higher content of nitrogen in herbaceous biomass in comparison of another fuel). Proceedings of the 19th European Biomass Conference and Exhibition, 6-10 June 2011, Berlin, Germany, pp. 1296-1304