• Energy Research
• Open Access close
• Closed Access close
• Restricted close
• 7. Clean energy close
• 12. Responsible consumption close
• 3. Good health close
• FI close

This dataset contains data and codes required to replicate the results in the article "Joint assessment of generation adequacy with intermittent renewables and hydro storage: A case study in Finland" to be published in Electric Power Systems Research. See the enclosed Readme for further instructions.

Abstract. Reliable quantification of the sources and sinks of greenhouse gases, together with trends and uncertainties, is essential to monitoring the progress in mitigating anthropogenic emissions under the Paris Agreement. This study provides a consolidated synthesis of CH4 and N2O emissions with consistently derived state-of-the-art bottom-up (BU) and top-down (TD) data sources for the European Union and UK (EU27+UK). We integrate recent emission inventory data, ecosystem process-based model results, and inverse modelling estimates over the period 1990–2018. BU and TD products are compared with European National GHG Inventories (NGHGI) reported to the UN climate convention secretariat UNFCCC in 2019. For uncertainties, we used for NGHGI the standard deviation obtained by varying parameters of inventory calculations, reported by the Member States following the IPCC guidelines recommendations. For atmospheric inversion models (TD) or other inventory datasets (BU), we defined uncertainties from the spread between different model estimates or model specific uncertainties when reported. In comparing NGHGI with other approaches, a key source of bias is the activities included, e.g. anthropogenic versus anthropogenic plus natural fluxes. In inversions, the separation between anthropogenic and natural emissions is sensitive to the geospatial prior distribution of emissions. Over the 2011–2015 period, which is the common denominator of data availability between all sources, the anthropogenic BU approaches are directly comparable, reporting mean emissions of 20.8 Tg CH4 yr−1 (EDGAR v5.0) and 19.0 Tg CH4 yr−1 (GAINS), consistent with the NGHGI estimates of 18.9 ± 1.7 Tg CH4 yr−1. TD total inversions estimates give higher emission estimates, as they also include natural emissions. Over the same period regional TD inversions with higher resolution atmospheric transport models give a mean emission of 28.8 Tg CH4 yr−1. Coarser resolution global TD inversions are consistent with regional TD inversions, for global inversions with GOSAT satellite data (23.3 Tg CH4yr−1) and surface network (24.4 Tg CH4 yr−1). The magnitude of natural peatland emissions from the JSBACH-HIMMELI model, natural rivers and lakes emissions and geological sources together account for the gap between NGHGI and inversions and account for 5.2 Tg CH4 yr−1. For N2O emissions, over the 2011–2015 period, both BU approaches (EDGAR v5.0 and GAINS) give a mean value of anthropogenic emissions of 0.8 and 0.9 Tg N2O yr−1 respectively, agreeing with the NGHGI data (0.9 ± 0.6 Tg N2O yr−1). Over the same period, the average of the three total TD global and regional inversions was 1.3 ± 0.4 and 1.3 ± 0.1 Tg N2O yr−1 respectively, compared to 0.9 Tg N2O yr−1 from the BU data. The TU and BU comparison method defined in this study can be operationalized for future yearly updates for the calculation of CH4 and N2O budgets both at EU+UK scale and at national scale. The referenced datasets related to figures are visualized at https://doi.org/10.5281/zenodo.4288969 (Petrescu et al., 2020).

The social confinement resulting from the COVID-19 crisis temporarily reduced greenhouse gas emissions. Although experts contend that the decrease in pollution rates was not drastic, some surveys detect growth in social concern about the climate. In this new climate-conscious environment, municipalities and local governments are promoting a new way of living and caring for cities, even before they can regain national and international freedom of movement. This work analyzes the connections between new climate awareness arising from the COVID-19 crisis, proposals of sustainable citizenship around the world, and its communication on Twitter to educate the new eco-conscious audience. The methodology mixes quantitative and qualitative analysis, using the Twitonomy Premium tool and the Twitter research tool with data extracted at the end of December 2020. Among the top ten most influential and active accounts, the results show educational institutions, local institutions, companies, neighborhoods, associations, and influencers. The impossibility of living in the city has not prevented citizen education and commitment to make real change for when that city and its citizens return to normality. However, this new normality must be different: more ecological, more responsible, more sustainable, and practiced from early childhood.

Micro hydro power plants (µHPP) are typically used to supply electric energy to microgrids outside the national power grids taking care of the frequency control of the isolated system. A conventional way to maintain the load balance in the system is to use thyristor switched AC-AC converters controlled dump loads. A disadvantage of the AC-AC converters is their reactive power consumption decreasing the power factor at the generator output. To avoid this problem the authors have earlier proposed two converter topologies utilizing symmetrical switching scheme resulting to zero reactive power consumption. The objective of this paper is to evaluate the frequency regulation loop performance of the dump load controlled single generator system by using the symmetrically switched converter structures. Evaluation is carried out by analyzing the performances of different converter structures in a simulator representing the operation of a Cuban µHPP “Los Gallegos”. The results showed that the frequency regulation loop performance using each proposed converter structure satisfied the Cuban standard of frequency regulation, but with the symmetrically switched structures reactive power consumption was reduced resulting to reduced losses and improved effective current delivery capacity of the generator.

Sugarcane biorefineries, despite their contribution to sustainable transportation fuels and mitigation of carbon emissions in the mobility sector, produce a large amount of carbon dioxide in their conversion processes. According to the Paris climate agreement, a carbon neutral energy system has to be launched in the years to come, and in this scenario, greenhouse gases emission free industrial processes and alternative carbon sources will be needed. Therefore, this paper presents the evaluation of carbon mass balance of a typical Brazilian ethanol mill to better understand its potential for energy and carbon yield improvement. Due to the fact that Brazilian sugarcane mills are evolving from first generation to integrated first and second generation plant, four different scenarios were analysed. For a first generation plant without (S-I) and with conversion of straw to electricity (S-II) and for the integrated plant (S-III), results of carbon mass balance showed that the harvested sugarcane carbon was mainly converted into CO2 and in a smaller proportion into ethanol. In the modelled cases S-I to S-III the conversion of sugarcane carbon into CO2 and ethanol ranged from 41% to 53% and 17%-22%, respectively. Because this carbon amount in the CO2 flows provides an interesting platform to both increase the bioenergy produced and the harvested carbon-to-fuels ratio, a fourth scenario (S-IV) that studies the integration of power-to-gas (PtG) technologies into the mill was also considered. PtG can increase the sugarcane fuels energy content from 9.3 kW/ha to 33.6 kW/ha using 1361.3 MWe of electricity, increasing the amount of sugarcane carbon transformed into sugarcane based fuels to 54% and converting CO2 into a high value added product.

This dataset encompasses 12 years of hourly electricity demand observations from the Cuban electrical system, spanning the period from 2011 to 2022. This compilation of data stands as an exceptionally valuable resource for researching the patterns and forecasting the electrical demand on the Caribbean island. Analyzing this data can provide profound insights into energy consumption trends over time, facilitating more informed decision-making for energy management and policy formulation. It serves as a vital tool for stakeholders aiming to understand and adapt to the dynamic nature of electricity demand in Cuba.

The expansion of irrigated agriculture has increased global crop production but resulted in widespread stress to freshwater resources. Ensuring that increases in irrigated production only occur in places where water is relatively abundant is a key objective of sustainable agriculture, and knowledge of how irrigated land has evolved is important for measuring progress towards water sustainability. Yet a spatially detailed understanding of the evolution of global area equipped for irrigation (AEI) is missing. Here we utilize the latest sub-national irrigation statistics (covering 17298 administrative units) from various official sources to develop a gridded (5 arc-min resolution) global product of AEI for the years 2000, 2005, 2010, and 2015. We find that AEI increased by 11% from 2000 (297 Mha) to 2015 (330 Mha) with locations of both substantial expansion (e.g., northwest India, northeast China) and decline (e.g., Russia). Combining these outputs with information on green (i.e., rainfall) and blue (i.e., surface and ground) water stress, we also examine to what extent irrigation has expanded unsustainably (i.e., in places already experiencing water stress). We find that more than half (52%) of irrigation expansion has taken place in regions that were already water stressed, with India alone accounting for 36% of global unsustainable expansion. These findings provide new insights into the evolving patterns of global irrigation with important implications for global water sustainability and food security. Recommended citation: Mehta, P., Siebert, S., Kummu, M. et al. Half of twenty-first century global irrigation expansion has been in water-stressed regions. Nat Water (2024). https://doi.org/10.1038/s44221-024-00206-9 Open-access peer reviewed publication available at https://www.nature.com/articles/s44221-024-00206-9 Files G_AEI_*.ASC were produced using the GMIA dataset[https://data.apps.fao.org/catalog/iso/f79213a0-88fd-11da-a88f-000d939bc5d8]. Files MEIER_G_AEI_*.ASC were produced using Meier et al. (2018) dataset [https://doi.pangaea.de/10.1594/PANGAEA.884744].

PurposeThe purpose of this paper is to outline a comprehensive picture of the coverage of various certification schemes and sustainability principles relating to the entire value‐added chain of biomass and bioenergy and comparing them accordingly.Design/methodology/approachA tri‐dimensional approach (sustainability issues; technical biomass conversion routes; physical trade flows) was developed for testing the coverage of various sustainability dimensions in different phases of the value‐added chain with the chosen certification schemes and sustainability principles.FindingsUsing the tri‐dimensional approach, a comparison of the chosen schemes and principles demonstrated that the application of existing schemes and the development of new ones have placed a major emphasis on the primary production of biomass. Economic and social dimensions related to biofuels and bioenergy processing and trade were either emphasised less or they were covered inadequately. In view of this, the schemes sometimes seem to ignore that the utilisation of renewable energy as such guarantee no positive or neutral climate impact and may not be economically sustainable, especially when bioenergy can often be more expensive than energy generated from fossil energy sources.Originality/valueThe analysis showed that the tri‐dimensional model is an applicable framework that could facilitate policy makers to formulate policies that comprehensively take into consideration the various sustainability dimensions throughout the entire value‐added chain, now and in the future. It can be applied to the future outlining and completion of certification schemes and sustainability principles for biomass and bioenergy, as well as in the testing of their applicability in the implementation.

Abstract As the part of a study to develop buparvaquone (BPQ) formulations for the treatment of cutaneous leishmaniasis, the topical delivery of BPQ and one of its prodrugs from a range of formulations was evaluated. In previous studies, BPQ and its prodrugs were shown to be potent antileishmanials in-vitro, with ED50 values in the nanomolar range. 3-Phosphono-oxymethyl-buparvaquone (3-POM-BPQ) was the most potent antileishmanial and was chosen, together with the parent drug, for further investigation. The ability of the parent and prodrug formulations to cross human and murine skin was tested in-vitro using the Franz diffusion cells. Formulations intended for topical application containing either BPQ or 3-POM-BPQ were developed using excipients that were either acceptable for topical use (GRAS or FDA inactive ingredients) or currently going through the regulatory process. BPQ was shown to penetrate both human epidermal membranes and full thickness BALB/c skin from a range of formulations (gels, emulsions). Similarly, 3-POM-BPQ penetrated full-thickness BALB/c skin from several gel formulations. In-vitro binding studies showed that BPQ bound melanin in a dose-dependent manner and preferably bound to delipidized skin over untreated BALB/c skin (on a weight to weight basis). The results confirm that BPQ and its prodrug 3-POM-BPQ can penetrate the skin from several formulations, making them potentially interesting candidates for further investigation of topical formulations using in-vivo models of cutaneous leishmaniasis.

With increasing concern over global climate change and rapid rise in energy consumption on the data-driven market, data centres are an important renewable energy target. As cooling contributes a substantial portion of the energy use of data centres, minimising the cooling energy demand in data centres is one of the main objectives for improving renewable energy. This paper investigates overall energy consumption and the energy efficiency of the cooling system for a data centre in Finland as a case study. The temporal energy consumption characteristics, cooling infrastructure and operation of the data centre are analysed. The main problems associated with cooling energy efficiency and the factors that may contribute toward higher efficiency are identified and further suggestions are put forward. Results are presented of an extensive evaluation of the energy performance of the study data centre with a view to energy recovery. The conclusion we can draw is that even though the analysed data centre demonstrat...