• Energy Research
• physical sciences close
• CN close
• GB close
• FR close

Characteristics of Tm:YAG ceramic for high efficient 2-μm lasers are analyzed. Efficient diode end-pumped continuous-wave and Q-switched Tm:YAG ceramic lasers are demonstrated. At the absorbed pump power of 53.2W, the maximum continuous wave (cw) output power of 17.2 W around 2016 nm was obtained with the output transmission of 5%. The optical conversion efficiency is 32.3%, corresponding to a slope efficiency of 36.5%. For Q-switched operation, the shortest width of 69 ns was achieved with the pulse repetition frequency of 500 Hz and single pulse energy of 20.4 mJ, which indicates excellent energy storage capability of the Tm:YAG ceramic.

Abstract Constructal theory has been used in several scientific fields since it has been established a decade ago. It mainly treats of the “area to point” flow problem, which has been first-written in the frame of the cooling of a finite-size volume generating heat. This problem, widely discussed in literature, has been optimized thanks to constructal theory formulated by Bejan, with a deterministic approach. However, some of the physical and mathematical assumptions made to simplify the problem are questionable, especially the ones regarding the high-conductivity material constituting the tree-shaped structure. In this paper, the performances of constructal designs are evaluated using a finite volume method, which allows making a comparison between different constructal geometries. An algorithm has been developed which has the ability for restraining constructal networks inside a finite-size area, without overconstraining the structure. All things considered, this paper examines constructal theory from a new point of view thanks to analytical and numerical investigations, in the frame of a finite-size volume generating heat.

Abstract The molten droplet fragmentation dominated by hydrodynamic mechanisms is the key process at the stage of pressure propagation in the process of the fuel–coolant interaction (FCI) which may occur during the course of a severe accident in a light water reactor (LWR). However, due to complication of the process, hydrodynamic fragmentation cannot be described by a particular mechanism, and there is no sufficient experimental studies under high pressure shock condition for this kind of fragmentation evaluation. In this paper, a multi-phase thermal hydraulic code with the Volume of Fluid Method (VOF) is developed, Continuum surface force (CSF) model is employed to compute the surface tension. The breakup process of a molten droplet under sudden accelerations is numerically analyzed to investigate the mechanism of fragmentation in vapor explosion. The results show that the breakup process experiences two stages: deformation and disintegration, which agrees with the simulation by Duan et al. (2003) using Moving Particle Semi-implicit (MPS) method. It is found that an increase in intensity of pressure pulse will accelerate the completion of breakup process and the dimensionless breakup time from the simulation is not strongly affected by Bond number ( Bo ). The simulation results suggest that the deformation imposed by the external hydrodynamic pressure distribution should be the dominant factor in breakup process for molten droplets in liquid–liquid system simulated in this paper.

Safety and Security Science

AbstractWe study the propagation of cosmological gravitational wave (GW) backgrounds from the early radiation era until the present day in modified theories of gravity. Comparing to general relativity (GR), we study the effects that modified gravity parameters, such as the GW friction αMand the tensor speed excessαT, have on the present-day GW spectrum. We use both the WKB estimate, which provides an analytical description but fails at superhorizon scales, and numerical simulations that allow us to go beyond the WKB approximation. We show that a constantαTmakes relatively insignificant changes to the GR solution, especially taking into account the constraints on its value from GW observations by the LIGO-Virgo collaboration, whileαMcan introduce modifications to the spectral slopes of the GW energy spectrum in the low-frequency regime depending on the considered time evolution ofαM. The latter effect is additional to the damping or growth occurring equally at all scales that can be predicted by the WKB approximation. In light of the recent observations by pulsar timing array (PTA) collaborations, and the potential observations by future detectors such as SKA, LISA, DECIGO, BBO, or ET, we show that, in most of the cases, constraints cannot be placed on the effects ofαMand the initial GW energy density ℰ*GWseparately, but only on the combined effects of the two, unless the signal is observed at different frequency ranges. In particular, we provide some constraints on the combined effects from the reported PTA observations.

Aluminium powder is of major interest in many applications but it presents a risk due to its high explosibility, particularly when dispersed in air. The safety is directly linked to the particles oxidation because the Minimum Ignition Energy (MIE), which is required to initiate an Al dust explosion, increases with the oxide layer thickness. This study provides a controlled method to furnish reproducible homogeneous set of powder for such safety studies. Thanks to a new experimental bench, the influence on the oxidation rate of seven treatment parameters is investigated (current density, time of treatment, acid concentration, mass of powder, particles size, stirring, neutralisation by ammonia solution). The oxide content is plotted versus the current density, the time and the acid concentration to provide reference curves for further elaboration of oxidised powder. The particles size of sieved powder is measured before and after treatment by different methods (optical and Scanning Electron Microscopes, laser measurement). A high refinement of the powder in terms of size distribution is achieved thanks to the employed sieving. The present bench and the elaborated procedure are of great interest to provide well-calibrated oxidised powder directly available for safety studies. The time must be adjusted, depending on the wanted oxide content--from 2 to 18 wt.% - and the other treatment parameters must be kept constant: acid concentration (5 wt.%), current density (1 Adm(-2)), treated powder (20 g). In these conditions, the ratio of the oxide layer thickness on the particles diameter is found to be constant for a given oxide content whatever the particles size.

Abstract In this work, we propose an acoustic energy harvesting metamaterial consisting of an array of silicone rubber pillars and a PZT patch deposited on an ultrathin aluminum plate with several holes based on locally resonant mechanism. The resonance is formed by removing four pillars, drilling a few of holes and attaching the PZT patch on the aluminum plate. The strain energy originating from an incident acoustic wave is centralized in the resonant region, and the PZT patch is used to convert the elastic strain energy into electrical power. Numerical analysis and experimental results show that the proposed millimeter-scale harvester with holes obviously improves the effect of acoustic energy harvesting while performing at the subwavelength scale for sonic low-frequency environment (less than 1150 Hz). In addition, the experimental results demonstrate that the maximum output voltage and power of the proposed acoustic energy harvesting system with 16 holes of 2 mm radius are 3 and 10 times higher than those without holes at the resonant mode for 2 Pa of incident acoustic pressure. Both the number and size of holes have a significant effect on the performance of acoustic energy harvesting. The advantages of the proposed structure are easy-to-machine and full of practicality, and it can be used in broad applications for low-frequency acoustic energy harvesting.