• Energy Research
• Closed Access close
• GB close
• BE close

Abstract This paper addresses the problem of how to synthesize mass and heat exchange processes, in which stream flowrates and their inlet compositions and temperatures may vary according to a set of discrete values. A unified hyperstructure representation of mass and heat exchange alternatives is introduced to account for all mass and heat integration possibilities. A multiperiod mixed integer nonlinear programming (MINLP) model is then developed, where a total annualized cost is minimized by balancing capital investment cost (of the heat and mass exchange equipment and their interconnections) to operating cost (of the hot-cold utilities, mass separating agents, etc.). As illustrated with the example problems, the proposed model can be effectively employed for the synthesis of flexible heat exchanger networks (HENs) and mass exchanger networks (MENs) separately or, for the synthesis of separation processes involving both heat and mass transfer.

Turbulent spots were generated artificially to simulate natural spots in the transitional boundary layer. The spots at the final stage under zero and adverse pressure gradients were measured using conventional hotwire anemometry technique. Ensemble averages of the velocity traces were calculated and velocity profiles through the spots and the surrounding region were plotted. The spots are represented by the ensemble average of the velocity perturbations. The integral boundary layer properties are derived and compared through the spots. The effect of the pressure gradient on the turbulent spots is analysed with the structure of the spots and the ‘calmed region’ following the spots.

Genuine Savings (GS), also known as ‘net adjusted savings’, is a composite indicator of the sustainability of economic development. Genuine Savings reflects year-on-year changes in the total wealth or capital of a country, including net investment in produced capita, investment in human capital, depletion of natural resources, and damage caused by pollution. A negative Genuine Savings rate suggests that the stock of national wealth is declining and that future utility must be less than current utility, indicating that economic development is non-sustainable (Hamilton and Clemens, 1999). We make use of data over a 150 year period to examine the relationship between Genuine Savings and a number of indicators of well-being over time, and compare the relative changes in human, produced, and components of natural capital over the period. Overall, we find that the magnitude of genuine savings is positively related to changes in future consumption, with some evidence of a cointegrating relationship. However, the relationships between genuine savings and infant mortality or average heights are less clear.

A data correction method to eliminate the effect of local tissue-accelerometer vibration from surface measurements of vibration over the spine has been developed and compared with previous direct measurements. A single degree-of-freedom linear model for the local tissue-accelerometer system in the vertical and the fore-and-aft axes is assumed. The natural frequency and the damping ratio of the local system are estimated so as to form a correction frequency function, using spectral analysis of the free vibration response of the local system caused by transient displacements of the accelerometer attached to the body surface. Accelerometers were attached to the skin over the spinous process of the vertebra L3 and on the abdominal wall. For four different masses and each site, correction frequency functions were computed. Seated subjects were then exposed to vertical random vibration (0.5-35 Hz) and acceleration transfer functions from the seat to each accelerometer were calculated. Different transfer functions were obtained with different additional masses but the differences were eliminated by the correction method so as to indicate the transfer functions to the spine and the viscera. For vertical responses, the correction method was effective at frequencies below the estimated natural frequencies of the local system. Fore-and-aft response over the spine did not require correction at frequencies below 35 Hz.

Economic and environmental regeneration of post-industrial landscapes frequently involves some element of re-afforestation or tree planting. We report field trials that evaluate whether woody biomass production is compatible with managing residual trace element contamination in brownfield soils. Large-scale mapping of contamination showed a heterogenous dispersion of metals and arsenic, and highly localised within-site hotspots. Yields of Salix, Populus and Alnus were economically viable, showing that short-rotation coppice has a potentially valuable role in community forestry. Mass balance modelling demonstrated that phytoextraction potentially could reduce contamination hotspots of more mobile elements (Cd and Zn) within a 25-30-year life cycle of the crops. Cd and Zn in stems and foliage of Salix were 4-13 times higher than EDTA-extractable soil concentrations. Lability of other trace elements (As, Pb, Cu, Ni) was not increased 3 years after planting the coppice; woody biomass may provide an effective reduction of exposure (phyto-stabilization) to these less mobile contaminants.

Abstract Exergy analysis is very helpful for reducing irreversibility and rising the efficiency of solar collectors. The major objective of the present study is to organize a review on exergy analysis of different parabolic solar collectors. The effects of various flows and geometrical parameters of parabolic thermal collectors on the exergy efficiency were presented and discussed. In addition, comparative study was carried out to select the best solar thermal system for maximum exergy efficiency with minimal thermal losses. This study indicated that the hybrid nanofluids enhanced the exergy efficiency significantly as compared to without hybrid nanofluids. Passive techniques comprising twisted tape inserts, fins and insertion of swirl devices in the stream for changing the stream patterns causes to interrupt the thermal boundary layer and accordingly high exergy efficiency. This review would also throw light on the scope for further research and recommendation for improvement in the existing solar thermal collectors. Finally, this work will be beneficial for the scholars working on exergy analyses of solar parabolic collectors.

Abstract The practice of stepping a conveying line is not new and there are many examples in industry; however, the details of the flow behaviour at the step have not been extensively studied. Three step geometries were modelled: an ‘abrupt’ step and two ‘gradual’ step-up geometries from a pipe bore of 75–100 mm. The flow behaviour of a single plug of material passing through these geometries was investigated using the ‘Eulerian’ CFD model from Fluent. Solids volume fractions were recorded at 0.01 s time steps at several point locations, and visualised throughout the pipe.

The deposition of ash - combustion residues - on superheaters and heat exchanger surfaces reduce their efficiency; this phenomenon was investigated for a large-scale waste-to-energy incineration facility. Over a period of six months, ash samples were collected from the plant, which included the bottom ash and deposits from the superheater, as well as flyash from the convective heat exchanger, the economiser and fabric filters. These were analysed for particle size, unburned carbon, elemental composition and surface morphology. Element partitioning was evident in the different combustion residues, as volatile metals, such as cadmium, antimony and arsenic, were found to be depleted in the bottom ash by the high combustion temperatures (1000+°C) and concentrated/enriched in the fabric filter ash (transferred by evaporation). Non-volatile elements by contrast were distributed equally in all locations (transported by particle entrainment). The heat exchanger deposits and fabric filter ash had elevated levels of alkali metals. 82% of flyash particles from the fabric filter were in the submicron range.

In a recent paper Huntington lays some of the groundwork for more meaningful discussions between economists and technologists on the apparent underinvestment in energy efficiency. In a discussion illustrated by a production function, he points out that the technical efficiency of economic actors should be treated as an empirical question. Huntington's groundwork can be further extended by observing that there is a close relationship between production functions and conservation supply curves, an analytical tool routinely used by technologists. Here we show that a conservation supply curve can be obtained from a production function by a simple transformation.