• Energy Research
• 7. Clean energy close
• GB close
• IN close
• Renewable Energy close

A new sizing approach is applied in this paper to stand-alone PV systems design, which is based on systems configurations without shedding load. The investigation is based on a detailed study of the minimum storage requirement and an analysis of the sizing curves. The analysis reveals the importance of using daily series of measured solar radiation data instead of monthly average values. For high-reliability systems, it is important that these data series are as long as possible, while the configuration of large generator and small battery seems to deal better with the unpredictability of solar radiation.

Abstract In some shelf sea regions of the world, the tidal range is sufficient to convert the potential energy of the tides into electricity via tidal range power plants. As an island continent, Australia is one such region – a previous study estimated that Australia hosts up to 30% of the world’s resource. Here, we make use of a gridded tidal dataset (TPXO9) to characterize the tidal range resource of Australia. We examine the theoretical resource, and we also investigate the technical resource through 0D modelling with tidal range power plant operation. We find that the tidal range resource of Australia is 2004 TWh/yr, or about 22% of the global resource. This exceeds Australia’s total energy consumption for 2018/2019 (1721 TWh/yr), suggesting tidal range energy has the potential to make a substantial contribution to Australia’s electricity generation (265 TWh/yr in 2018/2019). Due to local resonance, the resource is concentrated in the sparsely populated Kimberley region of Western Australia. However, the tidal range resource in this region presents a renewable energy export opportunity, connecting to markets in southeast Asia. Combining the electricity from two complementary sites, with some degree of optimization tidal range schemes in this region can produce electricity for 45% of the year.

Abstract Sugarcane is a major crop cultivated globally and the residue left over after the crop harvest and extraction of juice is a good biomass source that can be used for the production of several useful chemicals. The sugarcane bagasse is an excellent substrate for the production of various biochemicals and enzymes through fermentation. Now major interest is focused on the utilization of these residue for biofuel production. The sugarcane crop residue is rich in cellulose and hemicellulose, hence it can be used for the production of bioethanol and other liquid transportation fuels. The present review gives a detailed account of the availability of sugarcane residue and various commercially important products that can be produced from this residue. It also provides recent developments in R&D on the bioconversion of sugarcane crop residue for value added products.

Abstract A vapour absorption refrigeration system (VARS) in which a transfer tank replaces the conventional solution pump is analysed. Six fluid pairs with R22 as the refrigerant and different absorbents: DMA; DMF; DMETEG; DMETrEG; DMEDEG; and NMP are considered. Variations in COP, circulation ratio, percent mass of generated vapour utilised for transfer-tank operation, and minimum generator temperature are compared over a wide range of operating conditions. In general, R22-DMA, R22-DMF, and R22-DMETrEG are preferable for a transfer-tank operated VARS. At high generator temperatures or low condenser temperatures, R22-DMA gives the best overall performance. When the temperatures of the evaporator, absorber, and condenser are high, one may prefer R22-DMF as the working fluid.

Small-scale wind turbine operations within the urban environment are exposed to high levels of gusts and turbulence compared to flows over less rough surfaces. There is therefore a need for such systems to not only cope with, but to thrive under such fluctuating flow conditions. This paper addresses the potential importance of gust tracking technologies within the urban environment via the analysis of the additional energy present in the gusty wind resource using high resolution measurements at two urban roof-top locations. Results demonstrate significant additional energy present in the gusty wind resource at high temporal resolution. This energy is usually under-represented by the use of mean wind speeds in quantifying the power in the wind over longer averaging times. The results support the promise of capturing a portion of this extra energy through gust tracking solutions. The sensitivity of this “additional” wind energy to averaging time interval is also explored, providing useful information for the design of gust tracking or dynamic control algorithms for small-scale turbines. Relationships between turbulence intensity and excess energy available are drawn. Thus, an analytical model is proposed which may prove useful in predicting the excess energy available across wide areas from, for example, boundary layer turbulence models.

Abstract Climate change could substantially impact the performance of the buildings in providing thermal comfort to occupants. Recently launched UK climate projections (UKCP09), clearly indicate that all areas of the UK will get warmer in future with the possibility of more frequent and severe extreme events, such as heat waves. This study, as part of the Low Carbon Futures (LCF) Project, explores the consequent risk of overheating and the vulnerability of a building to extreme events. A simple statistical model proposed by the LCF project elsewhere has been employed to emulate the outputs of the dynamic building simulator (ESP-r) which cannot feasibly be used itself with thousands of available probabilistic climate database. Impact of climate change on the daily external and internal temperature profiles has been illustrated by means of 3D plots over the entire overheating period (May–October) and over 3000 equally probable future climates. Frequency of extreme heat events in changing climate and its impact on overheating issues for a virtual case study domestic house has been analyzed. Results are presented relative to a baseline climate (1961–1990) for three future timelines (2030s, 2050s, and 2080s) and three emission scenarios (Low, Medium, and High).

Abstract For the past few decades, the drastic increase in the installed capacity of wind farms (WFs) has necessitated a computationally efficient dynamic equivalent model of a WF, which can be used for accurate power network simulations. Various doubly-fed induction generators (DFIGs) with sophisticated power control, rotor, and grid side converter control based models for wind turbine (WT) exist in the literature. However, these models are computationally burdensome and restrict their application for modeling large WFs. Thus, an equivalent DFIG based model of a WF, with the rotor circuit modeled as a constant current source, is proposed in this paper. The proposed model is simple and computationally efficient as no rotor measurements are required, and voltage and current measurements at the point of common coupling (PCC) of the WF are used in extended Kalman filter (EKF) to evaluate the dynamic parameters of the equivalent DFIG. A Y b u s based reduction is also proposed for the equivalent collector system’s impedance. Simulation results on a test WF in MATLAB Simulink and DIgSILENT prove the proposed model’s efficacy over the existing equivalent models for different operating conditions like wake effect and contingencies in the interconnected power system network.

Abstract In this paper, a strategy is proposed in order to introduce in a realistic way wind generation into a transmission power system non sequential Monte Carlo adequacy study with economic dispatch. Thanks to the implemented solution, wind generation is consequently confronted to operational constraints related to high powered thermal units, nuclear parks or thermal machines with technical minimum value. Moreover, during each simulated system state, a DC load flow is also calculated in order to evaluate reinforcements optimizing the large scale integration of wind power production. The simulation tool modified during the present work is called Scanner© and is the property of Tractebel Engineering (Gaz de France – Suez) company. It has been here applied to an academic test system: the Roy Billinton Test System (RBTS).

Abstract The high viscosity of fish oil leads to problem in pumping and spray characteristics. The inefficient mixing of fish oil with air leads to incomplete combustion. The best way to use fish oil as fuel in compression ignition (CI) engines is to convert it into biodiesel. It can be used in CI engines with very little or no engine modifications. This is because it has properties similar to mineral diesel. Combustion tests for methyl ester of fish oil and its blends with diesel fuel were performed in a kirloskar H394 DI diesel engine, to evaluate fish biodiesel as an alternative fuel for diesel engine, at constant speed of 1500 rpm under variable load conditions. The tests showed no major deviations in diesel engine's combustion as well as no significant changes in the engine performance and reduction of main noxious emissions with the exception on NOx. Overall fish biodiesel showed good combustion properties and environmental benefits.