• Energy Research
• 13. Climate action close
• 15. Life on land close
• 14. Life underwater close
• US close
• GR close
• Energies close

We analyzed the peak spring tidal current speeds, annual mean tidal power densities ( T P D ) and annual energy production ( A E P ) obtained from experiment 06.1, referred as the “HYCOM model” throughout, of the three dimensional (3D), global model HYCOM in an area covering the Baja California Pacific and the Gulf of California. The HYCOM model is forced with astronomical tides and surface winds alone, and therefore is particularly suitable to assess the tidal current and wind-driven current contribution to in-stream energy resources. We find two areas within the Gulf of California, one in the Great Island Region and one in the Upper Gulf of California, where peak spring tidal flows reach speeds of 1.1 m per second. Second to fifth-generation tidal stream devices would be suitable for deployment in these two areas, which are very similar in terms of tidal in-stream energy resources. However, they are also very different in terms of sediment type and range in water depth, posing different challenges for in-stream technologies. The highest mean T P D value when excluding TPDs equal or less than 50 W m−2 (corresponding to the minimum velocity threshold for energy production) is of 172.8 W m−2, and is found near the town of San Felipe, at (lat lon) = (31.006–114.64); here energy would be produced during 39.00% of the time. Finally, wind-driven currents contribute very little to the mean T P D and the total A E P . Therefore, the device, the grid, and any energy storage plans need to take into account the periodic tidal current fluctuations, for optimal exploitation of the resources.

Nowadays, the imperative need for the reduction of Greenhouse Gas (GHG) emissions leads to the wider adoption of environmentally friendly transportation means. As a result, various policies underpinning the Electric Vehicle (EV) deployment are legislated globally, and several technical advances contributing to the electrification of the transportation sector are pursued. In this paper, a comprehensive overview of the current status of the infrastructure utilized for the realization of both conductive and contactless (wireless) charging of an EV battery is conducted. Furthermore, the issue of EV integration in conventional distribution networks, as well as in future power system architectures, is discussed in detail. Particular focus is given to wireless (i.e., inductive) charging. A detailed presentation of the respective standards and charging levels, as well as the magnetic couplers and the compensation network configurations, is carried out. Moreover, innovative concepts such as dynamic and quasi-dynamic wireless charging, as well as future challenges and opportunities, are presented and discussed. Finally, smart control and communication techniques applicable to EV charging are presented in the context of the future Internet of Energy (IoE) concept.

Hydrogen, as a maritime fuel, is one of the solutions that will assist the shipping sector in addressing the challenges regarding decarbonization, taking into consideration the targets set for 2030 and 2050. The extensive utilization of hydrogen requires massive production of green hydrogen and the development of proper infrastructure to support a sustainable supply chain. An alternative solution is based on the on-board production of hydrogen, where production units are installed on-board the vessel. Along these lines, the HYMAR project aims to test the utilization of a hydrogen production unit for on-board use. The article deals with the use of hydrogen as a fuel for internal combustion engines, taking into consideration reports from literature and the preliminary results of the HYMAR project, focusing on the environmental impact and the reduction in emissions. Experimental investigation on a marine auxiliary engine for power generation, under the HYMAR project, leads to promising results regarding the environmental footprint of the internal combustion engine when hydrogen is added in the fuel mix with increasing percentages.

In China, the power sector is currently the largest carbon emitter and the transportation sector is the fastest-growing carbon emitter. This paper proposes a model of solar-powered charging stations for electric vehicles to mitigate problems encountered in China’s renewable energy utilization processes and to cope with the increasing power demand by electric vehicles for the near future. This study applies the proposed model to Shenzhen City to verify its technical and economic feasibility. Modeling results showed that the total net present value of a photovoltaic power charging station that meets the daily electricity demand of 4500 kWh is $3,579,236 and that the cost of energy of the combined energy system is $0.098/kWh. In addition, the photovoltaic powered electric vehicle model has pollutant reduction potentials of 99.8%, 99.7% and 100% for carbon dioxide, sulfur dioxide, and nitrogen oxides, respectively, compared with a traditional gasoline-fueled car. Sensitivity analysis results indicated that interest rate has a relatively strong influence on COE (Cost of Energy). An increase in the interest rate from 0% to 6% increases COE from $0.027/kWh to $0.097/kWh. This analysis also suggests that carbon pricing promotes renewable energy only when the price of carbon is above $20/t.

Freshwater scarcity is a significant concern due to climate change in some regions of Brazil; likewise, evaporation rates have increased over the years. Floating photovoltaic systems can reduce water evaporation from reservoirs by suppressing the evaporating area on the water surface. This work evaluated the effects of floating photovoltaic systems on water evaporation rates in the Passaúna Reservoir, southeastern Brazil. Meteorological data such as temperature, humidity, wind speed, and solar radiation were used to estimate the rate of water evaporation using FAO Penman–Monteith, Linacre, Hargreaves–Samani, Rohwer, and Valiantzas methods. The methods were tested with the Kruskal–Wallis test, including measured evaporation from the nearest meteorological station to determine whether there were significant differences between the medians of the methods considering a 95% confidence level for hypothesis testing. All methods differed from the standard method recommended by the FAO Penman–Monteith. Simulations with more extensive coverage areas of the floating photovoltaic system were carried out to verify the relationship between the surface water coverage area and the evaporation reduction efficiency provided by the system and to obtain the avoided water evaporation volume. For the floating photovoltaic system with a coverage area of 1265.14 m2, an efficiency of 60.20% was obtained in reducing water evaporation; future expansions of the FPS were simulated with coverage areas corresponding to energy production capacities of 1 MWp, 2.5 MWp, and 5 MWp. The results indicated that for a floating photovoltaic system coverage area corresponding to 5 MWp of energy production capacity, the saved water volume would be enough to supply over 196 people for a year. More significant areas, such as covering up the entire available surface area of the Passaúna reservoir with a floating photovoltaic system, could save up to 2.69 hm3 of water volume annually, representing a more significant value for the public management of water resources.

Hydrogen sulfide (H2S) is a corrosive trace gas present in biogas produced from anaerobic digestion systems that should be removed to reduce engine-generator set maintenance costs. This study was conducted to provide a more complete understanding of two H2S scrubbers in terms of efficiency, operational and maintenance parameters, capital and operational costs, and the effect of scrubber management on sustained H2S reduction potential. For this work, biogas H2S, CO2, O2, and CH4 concentrations were quantified for two existing H2S scrubbing systems (iron-oxide scrubber, and biological oxidation using air injection) located on two rural dairy farms. In the micro-aerated digester, the variability in biogas H2S concentration (average: 1938 ± 65 ppm) correlated with the O2 concentration (average: 0.030 ± 0.004%). For the iron-oxide scrubber, there was no significant difference in the H2S concentrations in the pre-scrubbed (450 ± 42 ppm) and post-scrubbed (430 ± 41 ppm) biogas due to the use of scrap iron and steel wool instead of proprietary iron oxide-based adsorbents often used for biogas desulfurization. Even though the capital and operating costs for the two scrubbing systems were low (<$1500/year), the lack of dedicated operators led to inefficient performance for the two scrubbing systems.

Energy is required for socioeconomic development, and the world’s energy needs have significantly increased in the last decades. The lack of energy can have severe impacts on a person’s well-being; therefore, energy access should be ensured for everyone in the world. Energy poverty usually refers to a situation where a household cannot be kept adequately warm, but it is a complex issue with many more aspects. This paper aims to present a comprehensive review of the energy poverty problem, particularly presenting various definitions given in the literature that capture the multi-dimensional nature of the problem and analyzing the different ways of measuring energy poverty (expenditure approach and consensual approach). In addition, the impacts of the problem are identified, including health, socioeconomic, and environmental impacts, as well as the drivers that can worsen energy poverty conditions, such as several household characteristics and various socioeconomic and environmental factors. The situation occurring currently in the world is also presented, including studies that focus on different world regions, and the different solutions that can help address the problem are discussed, including changes to the living environments and the use of new technologies.

The advent of various initiatives around the globe in shaping an energy transition towards a “greener” energy production future sparked a research interest towards the determinants that will shape their success. In this paper, we depart from the relevant literature evaluating the potential effect of geopolitical tensions on renewable energy investments, building on an explicit quantitative approach that provides clear empirical evidence. In doing so, we compile a large panel of 171 economies and measure the effect of geopolitical risk on “green” investing as measured by popular geopolitical risk indices, while controlling for all major variables proposed by literature. Our flexible Autoregressive Distributed Lag model with heterogenous effects across economies suggests that geopolitical risk has a significantly measurable effect on green investments both in the short and the long run. In fact, our results suggest that proper model specification is robust across alternate risk assessments. Overall, our study has direct policy implications suggesting that renewable energy could be an important part of our energy mix only if we take into account its linkages with geopolitical tensions.

Crops for biofuels squanders cropland, water, and energy resources vital for food production needed for people.

Costs to permit Marine Energy projects are poorly understood. In this paper we examine environmental compliance and permitting costs for 19 projects in the U.S., covering the last 2 decades. Guided discussions were conducted with developers over a 3-year period to obtain historical and ongoing project cost data relative to environmental studies (e.g., baseline or pre-project site characterization as well as post-installation effects monitoring), stakeholder outreach, and mitigation, as well as qualitative experience of the permitting process. Data are organized in categories of technology type, permitted capacity, pre- and post-installation, geographic location, and funding types. We also compare our findings with earlier logic models created for the Department of Energy (i.e., Reference Models). Environmental studies most commonly performed were for Fish and Fisheries, Noise, Marine Habitat/Benthic Studies and Marine Mammals. Studies for tidal projects were more expensive than those performed for wave projects and the range of reported project costs tended to be wider than ranges predicted by logic models. For eight projects reporting full project costs, from project start to FERC or USACE permit, the average amount for environmental permitting compliance was 14.6%.