• Energy Research
• 7. Clean energy close
• 1. No poverty close
• IN close
• AU close
• BE close

This paper describes the application of IoT Technology for monitoring different parameters of battery of electric vehicle. Electric vehicle totally depends upon the source of energy from the battery. In this project, the idea of monitoring the performance of the vehicle using IoT techniques is proposed, so that monitoring can be done easily and directly. The objective of the project is to promote green power and to improve smartness of electric vehicle by monitoring the battery parameters such as voltage, temperature, current and charge avaibility. Also, these values displayed in cloud, which brings the concept of Internet of Things (IoT). The IoT based battery monitoring system consist of two major parts i) Monitoring device and ii) User interface. Based on experimental results, the system is capable to detect battery performance.

This paper presents a comparative study in predicting the monthly average solar radiation for Darwin, Australia (latitude 12.46 deg S longitude 130.84 deg E). The city of Darwin, Northern Territory (NT), has the highest and most consistent sunshine duration among all the other Australian states. This unique climate presents an opportunity for photovoltaic (PV) applications. Reliable and accurate predictions of solar radiation enable potential site locations, which exhibit high solar radiations and sunshine hours, to be identified for PV installation. Three predictive models were investigated in this study—the linear regression (LR), Angstrom–Prescott–Page (APP), and the artificial neural network (ANN) models. The mean global solar radiation coupled with the climate data (mean minimum and maximum temperatures, mean rainfall, mean evaporation, and sunshine fraction) obtained from the Australian Bureau of Meteorology (BoM) formed the basis of the dataset. Using simple and easily obtainable climate data presents an added advantage by reducing model complexity. Predictive results showed the root mean square errors (RMSEs) obtained were 6.72%, 13.29%, and 8.11% for the LR, APP, and ANN models, respectively. The predicted solar exposure from the LR model was then compared with the satellite-derived data to assess the accuracy of the LR method.

Abstract Designing a high-performance hydrofoil is a fundamental challenge for the current turbine blade designers. In this paper, the performance of S1210 hydrofoil, commonly used in the tidal current turbine blades, in presence of (i) Vortex Generators (VGs), and (ii) modified trailing edge is numerically studied. The results show that attaching counter-rotating VGs near the trailing edge of the foil can increase the lift coefficient by 17% and delay the stall angle from 10° to 12°. Constructing a rounded and thicker trailing edge can help to improve the hydrodynamic performance by increasing the lift coefficient by 13.5%. The combination of VGs (located near the trailing edge) and rounded trailing edge can increase the glide ratio significantly. These observations have been explained by plotting the pressure coefficients and velocity profiles at different locations on the foil surface. The findings will be useful to manufacture a stronger blade profile and extract more power from the current turbines that operate at wide current speed variation.

Longitudinal flow through central subchannel structures in an array of fuel rods in a nuclear reactor plays an important role in removing the heat generated inside the fuel rods. In this paper, an entropy generation analysis has been carried out for assessment of the performance of an infinite triangular as well as a square subchannel for single-phase forced turbulent flow. The performance is evaluated with the objective function being the overall entropy generation in a central subchannel. Various constraints such as dimensionless flow area subtended by the array of rods, pitch to diameter ratio for the configuration of rod bundles and volumetric heat generation to power density ratio of the subchannel imposed by power restrictions have been considered. The parameters include the dimensionless wall heat flux, duty parameter, length to diameter ratio for fuel rods, Reynolds number etc. It has been observed that for a pitch to diameter ratio constraint the square subchannel generates lesser amount of entropy and thus more acceptable compared to triangular structure. For the same constraint the optimum Reynolds number shifts towards higher value compared to triangular one. For dimensionless flow area constraint, on the other hand, the analysis reveals completely reverse phenomenon.

Abstract Thermal energy storage systems based on Phase change materials (PCM) are an attractive option to bridge the temporal and spatial gap between the energy demand and supply. But, these systems possess poor thermal conductivity causing reduced rate of heat transfer. The objective of the present study is to numerically analyze the melting process in an optimized finned latent heat storage system dispersed with varying volume fraction of Graphene nano plates (GNP). The individual effect of incorporating fins, GNP and a combination of both at different volume fraction has been studied. Effective thermal conductivity of nano-composite PCM has been theoretically evaluated including the effect of aspect ratio, interfacial thermal resistance, anisotropy, non-linear effects as well as concentration for the dispersed GNP. In this work, Dynamic differential scanning calorimetry tests are performed to evaluate the phase change temperature, latent heat and specific heat of the sugar alcohol (d- mannitol). Transient variation of liquid fraction, average temperature and radial/longitudinal temperature differentials are presented which would be useful for designing medium temperature (160–200 °C) storage systems for various applications. Fin height is varied to obtain an optimum fin size such that natural convection currents are not impeded. Various heat transfer models (including natural convection) are analysed using the actual plant data of a double effect solar absorption system at different arrangements of fins and GNP. Effect of Reynolds number and inlet temperature of HTF on the system performance have also been studied. A reduction of 68% in total melting time is observed in finned LHSS with 5% GNP as compared to a conventional system.

Abstract Integration of solar photovoltaic (PV) and battery storage systems is an upward trend for residential sector to achieve major targets like minimizing the electricity bill, grid dependency, emission and so forth. In recent years, there has been a rapid deployment of PV and battery installation in residential sector. In this regard, optimal planning of PV-battery systems is a critical issue for the designers, consumers, and network operators due to high number of parameters that can affect the optimization problem. This paper aims to present a comprehensive and critical review on the effective parameters in optimal planning process of solar PV and battery storage system for grid-connected residential sector. The key parameters in process of optimal planning for PV-battery system are recognized and explained. These parameters are economic and technical data, objective functions, energy management systems, design constraints, optimization algorithms, and electricity pricing programs. A timely review on the state-of-the-art studies in PV-battery optimal planning is presented. The challenges, trends and latest developments in the topic are discussed. At the end, scopes for future studies are developed. It is found that new guidelines should be provided for the customers based on various electricity rates and demand response programs. Also, several design considerations like grid dependency and resiliency need further investigation in the optimal planning of PV-battery systems.

Abstract Hybrid nanofluids are a novel class of colloidal fluids which have drawn significant attention due to potential tailoring of their thermo-physical properties for heat transfer enhancement by a combination of more than one nano-additive to meet specific requirements of an application. In the present work, ceramic copper oxide/carbon (SiO2-CuO/C) nanoparticles in 80:20 (wt%) composition were prepared by ultrasonic-assisted wet mixing technique. The hybrid nanofluid was formulated by dispersing the nanoparticles into a base fluid mixture of 60:40 (% by mass) glycerol and ethylene glycol (G/EG) using the two-steps method. The influence of nanoparticles on the augmentation of specific heat, thermal conductivity and viscosity was examined in the volume concentration range of 0.5–2.0% in the temperature range of 303.15–353.15 K. The results demonstrate that the synthesized SiO2-CuO/C hybrid nanoparticles enhanced the thermo-physical properties of the base fluid mixture which is higher than using SiO2 alone. In the case of SiO2–G/EG nanofluid, the specific heat capacity decremented by a maximum value of 5.7% whereas the thermal conductivity and viscosity incremented by 6.9% and 1.33-times as compared with G/EG at maximum volume concentration of 2.0% at a temperature of 353.15 K. Comparatively, a reinforcement of 80% SiO2 with 20% CuO/C in G/EG mixture led to thermal conductivity and viscosity enhancement by 26.9% and 1.15-times, respectively with a significant reduction of specific heat by 21.1%. New empirical correlations were proposed based on the experimental data for evaluation of thermophysical properties.

Abstract The upward energy demand, along with the depletion of conventional energy sources, demands improved utilization of renewable energy resources. Among all renewable energy resources, solar energy is the most appropriate alternative to conventional energy sources owing to its inexhaustibility and green property. Solar collectors are devices that convert solar radiation into heat or energy. However, the efficiency of the solar collector is still not adequate. The competent step to enhance the efficiency of the solar collector is to use nanofluids. This study is carried out different phases viz. characterization and stabilization while both qualitative and quantitative methods used to evaluate the stability of nanofluids thermophysical properties of Al2O3 and CNC nanofluids such as thermal conductivity measured at four different temperature using KD2 Pro, viscosity and specific heat determined at similar temperature range by viscometer and differential scanning calorimetry respectively. The experiment is executed with a fixed flow rate and in steady-state conditions under extensive solar radiation. The experimental study has revealed that up to 2.48% and 8.46% efficiency of solar collector enhanced by using 0.5% Al2O3 and 0.5% CNC nanofluids respectively. Moreover, nanofluids show good to moderate stability performance. Besides, the thermal conductivity of nanofluids increased while viscosity is in a decreasing trend with increasing temperature. Nanofluids could enhance the efficiency of a flat-plate solar collector.

Abstract It is well known that Espinosa-parades et al. (Espinosa-Paredes et al., 2011) proposed a fractional neutron point kinetic (FNPK) model with multi-group of delayed neutrons to describe dynamic behavior in a nuclear reactor. In (Aboanber and Nahla, 2016b), Aboanber and Nahla presented an extension of Espinosa-parades et al. FNPK model. This new model is called as the corrected fractional neutron point kinetic (CFNPK) model. The present study is concerned with the numerical solution of the CFNPK model (Aboanber and Nahla, 2016b) with six groups of delayed neutron precursors. The fractional derivative is described in the sense of Grunwald-Letnikov. An implicit finite difference method (FDM) is constructed for the solution of CFNPK model. The stability analysis of the method is carried out. We analyze the results of neutron density for different values of anomalous diffusion order, reactivity function, relaxation time and time step size. In addition, we compare the results corresponding to CFNPK model (Aboanber and Nahla, 2016b) with the results corresponding to the FNPK model proposed by Espinosa-parades et al. (Espinosa-Paredes et al., 2011). It is shown that as anomalous diffusion order decreases or simulation time increases the difference between the values of neutron density increases. We have investigated the effects of each term of the CFNPK.