• Energy Research
• 6. Clean water close
• IN close
• AU close
• BE close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

A natural holm oak forest was selectively thinned to test thinning as a tool to reduce tree mortality, increase productivity, and reverse the recent regression of the dominant species (Quercus ilex) induced by climate change. Thinning increased aboveground productivity and reduced stem mortality in this Mediterranean forest during four years just after thinning, contributing to the maintenance of forest functioning under changing climatic conditions. Q. ilex was the only species positively affected by the thinning: stem growth increased for all stem sizes, and mortality was significantly lower in thinned plots. On the contrary, mortality rates of Phillyrea latifolia and Arbutus unedo were not significantly lower. Stem growth increased for P. latifolia only in the smallest stem-size class. Our results highlight the suitability of selective thinning for improving the forest productivity and ensuring the conservation of Mediterranean coppices. Other benefits of selective thinning, such as a decrease in the risk of fire dispersion and an increase in the water supply for human populations, are also discussed.

Considerable interest is being shown in using biochar production from waste biomass with a variety of disciplines to address the most pressing environmental challenges. Biochar produced by the thermal decomposition of biomass under oxygen-limited conditions is gaining popularity as a low-cost amendment for agro-ecosystems. The efficiency of biochar formation is affected by temperature, heating rate, feedstock type, particle size and reactor conditions. Properties such as pH, surface area and ash content of produced biochar increases with increasing temperatures. Biochar produced at lower heating rates may have high porosity and be beneficial for morphological changes in the soil. Biochar can help to enhance soil health and fertility as well as improve agricultural yield. As a result, biochar can assist in increasing food security by promoting sustainable agricultural systems and preserving an eco-friendly environment. Biochar is also widely being used as a sorbent for organic and inorganic pollutants, owing to its large surface area, allowing it to be immobilized from soil with ease. The functional groups and charges present on the surface of biochar play an important role in pollutants removal. This review focuses on the mechanisms of biochar production using different waste materials as a feed stock, factors that influence biochar quality as well as application of biochar in agricultural soil and their reclamation as well. This article also discusses knowledge gaps and future perspectives in the field of biochar-based toxic-pollution remediation.

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

In a study of the electrochemical behavior of low-cyanide silver plating baths and of the properties of the deposits obtained, it was found that the current-potential curve obtained with a solid electrode showed a two-step reduction wave, the height of the first being 1/5 that of the second. Analysis of the results of polarographic and rotating disk electrode measurmenents sugests that the rate-controlling steps wereAgCN+e-_??_Ag+CN-……(1)Ag(CN)2-+e-_??_Ag+2CN-……(2)for the first and second waves respectively. The Tafel plots of the two waves showed linear relationships at their rising portions, and the reactions are accordingly concluded to be slow chargetransfer controlled.In baths to which selenocyanate ion was added, the increase in current was markedly greater for the second wave than for the first, and the wave was shifted to the positive side. Potential decay curves for the baths containing selenocyanate ion obtained by the current interrupter method showed lower differential capacities than those for baths that were free of selenocyanate ion. This indicates that the selenocyanate ions were adsorbed preferentially at the electrode, suppress the adsorption of cyanide ions and enhancing the silver deposition reaction.Deposits obtained by jet plating were matt at current densities lower than 50A/dm2, and their appearance was not affected by the addition of selenocyanate ion. At above 50A/dm2, deposits obtained from selenocyanate-free baths were burnt, but deposits obtained from baths with selenocyanate ion added were mirror-bright with a strong (200) orientation up to around 150A/dm2.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

Abstract There are instances in remote areas where heat is being wasted, e.g., in internal combustion, engines, etc. Some of this heat can be recovered to produce distilled water in solar stills. The solar still replaces the cooling tower, ponds, or radiators normally used to control the engine temperature. The diesel cooling water in such a system remains separate from the saline water in the solar still. The advantages of using such a system compared with a conventional solar still are: 1. (a) water costs are very much reduced 2. (b) the area occupied is much less, i.e., about 1 5 th 3. (c) production has much less seasonal variation 4. (d) the efficiency of the solar still is improved due to the higher operating temperatures. From experiments conducted at Highett using a Mk VI solar still fitted with a simple heat exchanger and a separate electrically-heated source of hot water to simulate the waste heat, design data are not available for application to working systems. The information required to match a solar still to a diesel's cooling requirement is: 1. (a) engine efficiency 2. (b) hourly fuel consumption 3. (c) hourly solar radiation 4. (d) hourly ambient temperatures. A by-product of this work has been the production of a “solar water heater” which costs less than that of the cheapest conventional system. This “solar” hot water system uses a heat exchanger similar to what is used to transfer the waste heat to the saline water. It is envisaged to have hot water productions approximately the same as the distilled water productions. The influence of hot water production on the output of the waste heat solar still is discussed.

River deltas and estuaries are disproportionally-significant coastal landforms that are inhabited by nearly 600 M people globally. In recent history, rapid socio-economic development has dramatically changed many of the World's mega deltas, which have typically undergone agricultural intensification and expansion, land-use change, urbanization, water resources engineering and exploitation of natural resources. As a result, mega deltas have evolved into complex and potentially vulnerable socio-ecological systems with unique threats and coping capabilities. The goal of this research was to establish a holistic understanding of threats, resilience, and adaptation for four mega deltas of variable geography and levels of socio-economic development, namely the Mekong, Yellow River, Yangtze, and Rhine deltas. Compiling this kind of information is critical for managing and developing these complex coastal areas sustainably but is typically hindered by a lack of consistent quantitative data across the ecological, social and economic sectors. To overcome this limitation, we adopted a qualitative approach, where delta characteristics across all sectors were assessed through systematic expert surveys. This approach enabled us to generate a comparative assessment of threats, resilience, and resilience-strengthening adaptation across the four deltas. Our assessment provides novel insights into the various components that dominate the overall risk situation in each delta and, for the first time, illustrates how each of these components differ across the four mega deltas. As such, our findings can guide a more detailed, sector specific, risk assessment or assist in better targeting the implementation of risk mitigation and adaptation strategies.