• Energy Research
• 7. Clean energy close
• 11. Sustainability close
• 12. Responsible consumption close
• CN close
• IN close
• DE close

Flexible butyl interconnection segments are synthetically incorporated into an electronically conductive poly(pyrene methacrylate) homopolymer and its copolymer. The insertion of butyl segment makes the pyrene polymer more flexible, and can better accommodate deformation. This new class of flexible and conductive polymers can be used as a polymer binder and adhesive to facilitate the electrochemical performance of a silicon/graphene composite anode material for lithium ion battery application. They act like a “spring” to maintain the electrode mechanical and electrical integrity. High mass loading and high areal capacity, which are critical design requirements of high energy batteries, have been achieved in the electrodes composed of the novel binders and silicon/graphene composite material. A remarkable area capacity of over 5 mAh/cm2 and volumetric capacity of over 1700 Ah/L have been reached at a high current rate of 333 mA/g.

AbstractTo estimate the life cycle cost of thermal power equipments in engineering, this paper established a comprehensive evaluation model of life cycle cost with the life cycle breakdown and cost breakdown structure. Based on the model, this paper defined the cost elements of the thermal power equipment, analyzed influences of the thermal power equipment. Finally, the model is applied to an instance to estimate various cost categories in each life phase, which were summed up to the life cycle cost of the thermal power equipment.

A template‐agent can affect defect formation as well as influence interface properties, due to the rapid growth of perovskite film from the solution. Herein, diethylammonium iodide (DAI) is used as an effective template‐agent to control the perovskite crystallization during preparation. It is found that a very small amount of DAI in chlorobenzene (CB) can slow down the perovskite growth of the CH3NH3PbI3 (MAPbI3) film with more large grain size and compacted crystal‐grains resulting in the lesser grain boundaries (GBs) in favor of carrier transport in perovskite solar cells (PSCs). Moreover, some redundant PbI2 can be digested to form DA2PbI4. One part of DA2PbI4 can form the sub‐grains with the composition of (DA2PbI4)0.2(PbI2)0.8 to passivate the GB defects, and other part can cover the surface to passivate the surface defects in large MAPbI3 grains. Using an optimized DAI concentration of 0.5 mg mL−1 in CB solution, the corrsponding MAPbI3 PSC achieves an increased power conversion efficiency of 20.31% with suppressed current–voltage hysteresis. This DAI passivation strategy provides a simple approach to effectively assist the grain‐growth for improved device performance.

The rapid development of advanced metering infrastructure provides a new data source—building electrical load profiles with high temporal resolution. Electric load profile characterization can generate useful information to enhance building energy modeling and provide metrics to represent patterns and variability of load profiles. Such characterizations can be used to identify changes to building electricity demand due to operations or faulty equipment and controls. In this study, we proposed a two-path approach to analyze high temporal resolution building electrical load profiles: (1) time-domain analysis and (2) frequency-domain analysis. The commonly adopted time-domain analysis can extract and quantify the distribution of key parameters characterizing load shape such as peak-base load ratio and morning rise time, while a frequency-domain analysis can identify major periodic fluctuations and quantify load variability. We implemented and evaluated both paths using whole-year 15-minute interval smart meter data of 188 commercial office building in Northern California. The results from these two paths are consistent with each other and complementary to represent full dynamics of load profiles. The time- and frequency-domain analyses can be used to enhance building energy modeling by: (1) providing more realistic assumptions about building operation schedules, and (2) validating the simulated electric load profiles using the developed variability metrics against the real building load data.

Abstract The prime purpose of this work is to prepare a novel kind of Pickering interfacial solid catalysts for biodiesel production to meet the requirements of highly efficiency and environmental benign. To achieve this goal, the core–shell P[xSPA-yDABCO]@SiO2@Fe3O4 composite materials with a shell of photo-responsive and base catalytic sites were manufactured by means of layer-by-layer fabrication method. The modified materials, entirely characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectra, X-ray powder diffraction (XRD) and magnetization versus magnetic (VSM) techniques, demonstrated sufficient catalytic active sites and photo-responsive sites. Among all the so-prepared catalysts, P[3SPA-2DABCO]@SiO2@Fe3O4 performs extremely well and can stabilize soybean oil-in-methanol Pickering emulsion for 24 h, achieving a biodiesel yield up to 98.2% at a catalyst dosage of 5 wt% after the reaction time of 5 h at 60 °C. Furthermore, the double responsive solid catalyst can be readily separated from the mixture of reaction by an external magnet and UV irradiation, and still presented superior catalytic activity after 6 cycles.

The distribution feeders often gets overload under peak power demands. This situation is generally countered by load shading, which leads to financial losses to utilities and individual users. This paper presents the new methodology to support the real and reactive power demand through energy storage (ES) to avoid the load shading situation. The compensation of real / reactive power not only provides the voltage profile improvement but also ensures the sustain power to the consumers. A control scheme incorporated also maintains the unity power factor on source side. This relieves the existing distribution network from the extra reactive loading hence the line is having extra capacity for real power transfer to its maximum thermal limit. This additional capacity availability adds more customer base to justify the energy storage investment. The operational features are presented through a simulation of a realistic urban feeder data. The financial analysis is also presented to justify the energy storages with the distribution networks.

The electro-hydraulic servo pump control system (EHSPCS) is a volume control system that uses a permanent magnet synchronous motor (PMSM) with a fixed displacement pump to directly drive and control the hydraulic cylinder. The energy transmission law of the system is very complicated due to the transformation of electrical, mechanical and hydraulic energy as well as other energy fields, and qualitative analysis of the energy transfer efficiency is difficult. Energy transfer analysis of the EHSPCS under different working conditions and loads is proposed in this paper. First, the energy flow transfer mechanism was analyzed, and the mathematical and energy transfer models of the key components of the system were established to explore the energy characteristic state transition rule. Second, a power bond diagram model was built, its state equation and state matrix were deduced, and a system simulation model was built. Finally, combined with the EHSPCS experimental platform, simulation experiments were carried out on the dynamic position following and steady-state position holding conditions of the system, and the variation rules of the power of each energy characteristic state and the system energy transfer efficiency under different loads were obtained. The research results provide a foundation for the study of power matching and energy-saving mechanism of the EHSPCS.

Abstract In this paper, we analyze the rationale for an energy policy mix when the European Emissions Trading Scheme (ETS) is considered from a public choice perspective. That is, we argue that the economic textbook model of the ETS implausibly assumes (1) efficient policy design and (2) climate protection as the single objective of policy intervention. Contrary to these assumptions, we propose that the ETS originates from a political bargaining game within a context of multiple policy objectives. In particular, the emissions cap is negotiated between regulators and emitters with the emitters' abatement costs as crucial bargaining variable. This public choice view yields striking implications for an optimal policy mix comprising RES supporting policies. Whereas the textbook model implies that the ETS alone provides sufficient climate protection, our analysis suggests that support for renewable energies (1) contributes to a more effective ETS-design and (2) may even increase the overall efficiency of climate and energy policy if other externalities and policy objectives besides climate protection are considered. Thus, our analysis also shows that a public choice view not necessarily entails negative evaluations concerning efficiency and effectiveness of a policy mix.