• Energy Research
• 13. Climate action close
• 6. Clean water close
• DE close
• IN close
• Energy Procedia close

AbstractAlthough the road-map of the oxy-fuel process seems to be very advanced, there are still plenty of open questions. One of the significant ones is the corrosive behaviour of the heat exchanger surfaces. The Institute of Combustion and Power Plant Technology, University of Stuttgart, performs research on the fireside corrosion under oxy-fuel and conventional combustion conditions for the current and supercritical power plants considering the influence of combustion modus, gas atmosphere and fly ash deposits on the waterwall and superheater surfaces. Since the oxy-fuel-combustion atmosphere is composed of recirculated flue gases and pure oxygen, significantly higher concentrations of CO2, SO2 and H2O are present compared to the conventional combustion of coal with air as an oxidizer. In the here presented study the influence of an oxy-fuel combustion of a hard-coal on the surface of selected superheater materials is discussed and compared to the results obtained for lignite. Especially the interactions between the flue gas atmosphere, ash deposits and heat exchanger materials are studied in detail. The investigation encompassed in this paper has been focused on impacts of oxide-scale growth, carbon enrichment of the materials and sulphur-induced corrosion.Increased sulphur-induced corrosion has been observed in samples exposed to the oxy-combustion atmosphere. The noticed higher depth of corrosive attack of the oxy-fuel samples might be explained by a higher partial pressure of SO2 which is characteristic for oxy-fuel process. Moreover in certain cases the sulphur might be released by the deposits. Beside that, the oxy-fuel samples were exposed to much higher partial pressures of carbon dioxide comparing to the air-case leading apparently to rapid and massive internal carbon enrichment in the oxide scale. Moreover dependence between the chromium content and oxidation ability of the austenitic materials surfaces was noticed under oxy-fuel conditions.

AbstractThe future European energy supply system will have a high share of renewable energy sources (RES) to meet the greenhouse gas emission policy of the European Commission. Such a system is characterized by the need for a strongly interconnected energy transport grid as well as a high demand of energy storage capacities to compensate the time fluctuating characteristic of most RE generation technologies. With the RE generators at the location of high harvest potential, the appropriate dimension of storage and transmission system between different regions, a cost efficient system can be achieved. To find the preferred target system, the optimization tool GENESYS (Genetic Optimization of a European Energy System) was developed. The example calculations under the assumption of 100% self-supply, show a need of about 2,500 GW RES in total, a storage capacity of about 240,000 GWh, corresponding to 6% of the annual energy demand, and a HVDC transmission grid of 375,000 GWkm. The combined cost for generation, storage and transmission excluding distribution, was estimated to be 6.87 ct/kWh.

The European Geosciences Union (EGU) brings together geoscientists from all over the world covering all disciplines of the Earth, planetary and space sciences. This geoscientific interdisciplinarity is needed to tackle the challenges of the future. One major challenge for humankind is to provide adequate and reliable supplies of affordable energy and other resources in efficient and environmentally sustainable ways. This Energy Procedia issue provides an overview of the contributions of the Division on Energy, Resources & the Environment (ERE) at the EGU General Assembly 2017.

Abstract Global primary energy consumption will continue to increase with a high rate to 2050, which will be a big challenge for countries to meet both global and regional energy demand. Pumped storage stations (PSS) integrated to a hybrid power system (HPS) with solar and wind power for China are under construction to tussle with this challenge. Historically, modeling of a PSS integrated HPS has been ignored the interaction effect between the shaft vibration and the governing strategies, which will increase the dynamic risk of PSS disconnected immediately to HPS. Here we unify the models of the hydro-turbine governing system and hydro-turbine generator units with a novel expression of hydraulic forces. We quantize all the parameter’s interaction contributions of PSS integration to HPS and validate this model with the existing models. Finally, we show the feasibility of PSS’s model in integrating of a HPS under steady and fault scenarios.

AbstractThis paper presents the experimental plans and designs as well as examples of predictive modeling of a pilot-scale CO2 injection experiment at the Heletz site (Israel). The overall objective of the experiment is to find optimal ways to characterize CO2 -relevant in-situ medium properties, including field-scale residual and dissolution trapping, to explore ways of characterizing heterogeneity through joint analysis of different types of data, and to detect leakage. The experiment will involve two wells, an injection well and a monitoring well. Prior to the actual CO2 injection, hydraulic, thermal and tracer tests will be carried out for standard site characterization. The actual CO2 injection experiments will include (i) a single well injection-withdrawal experiment, with the main objective to estimate in-situ residual trapping and (ii) a two-well injection-withdrawal test with injection of CO2 in a dipole mode (injection of CO2 in one well with simultaneous withdrawal of water in the monitoring well), with the objective to understand the CO2 transport in heterogeneous geology as well as the associated dissolution and residual trapping. Tracers will be introduced in both experiments to further aid in detecting the development of the phase composition during CO2 transport. Geophysical monitoring will also be implemented. By means of modeling, different experimental sequences and injection/withdrawal patterns have been analyzed, as have parameter uncertainties. The objectives have been to (i) evaluate key aspects of the experimental design, (ii) to identify key parameters affecting the fate of the CO2 and (iii) to evaluate the relationships between measurable quantities and parameters of interest.

AbstractA metal-organic framework, UiO-66, has been evaluated as adsorbent in a post-combustion vacuum swing adsorption (VSA) process. Equilibrium isotherms of the most relevant gases (CO2 and N2) as well as breakthrough curves measured using synthetic flue gas containing 15 mol% CO2 without and with 9 mol% water vapor are reported. Based on the breakthrough data, a six step one-column VSA cycle is designed and the effects of adsorption and CO2 rinse times used on the CO2 recovery and CO2 purity are examined. With the chosen process configuration and cycle design CO2 purities around 60% and CO2 recoveries up to 70% are achieved. 50 cycle adsorption-desorption experiments show that the cyclic CO2 capacity is reduced by approximately 25% in the presence of water vapor. No reduction in cyclic capacity is observed with increased cycle number; there is rather a slight increase in cyclic capacity with cycle number indicating that a cyclic steady state still not has been reached after 50 cycles.

AbstractAmine based solvent used for CO2 capture can be lost during the process due to: degradation, vaporization, mechanical losses and aerosol (mist) formation. Only recently, studies have appeared pointing out that aerosols can dominate the total amine emission at pilot plant scale behind coal fired power plants. Future full scale amine scrubber installations will be imposed emission limit values (ELV) for a number of components including NH3 and the amine itself. Most likely these ELV will be expressed as maximum concentrations tolerated in the CO2 poor flue gas leaving the stack so it is important to prevent or cure amine aerosol emission. The study presents a novel combination of two existing measurement techniques, that measure: (i) amine emissions from the top of the absorber using FTIR and (ii) PSD of the incoming flue gas using the ELPI+. The study is the first to show how combining these two measurement techniques allows to predict the presence or absence of mist formation. This hypothesis is based on information obtained during several measurement campaigns on different pilot plants.

AbstractWorld-wide coal reserves can supply the global demand for primary energy for several centuries. However, low thickness and structural complexity may constrain the economic exploitation of many coal deposits. Taking into account these circumstances, underground coal gasification (UCG) can offer an economical and sustainable approach for coal exploitation and subsequent feedstock generation from the syngas. The UCG process produces a high-calorific synthesis gas mainly consisting of methane, hydrogen and carbon dioxide, which can be used for electricity generation or feedstock production at the surface. Considering the latter, the Urea process can be applied to establish the nitrogen based fertilizer carbamide (CH4N2O). The required feedstock for carbamide production in the Urea process can be supplied by UCG syngas. The aim of the present study was the development of an integrated carbon utilisation concept based on the coupled UCG-Urea process. A significant amount of carbon dioxide from the UCG synthesis gas is required for carbamide production in the Urea process, while the excessive carbon dioxide can be re-injected into the cavities resulting in the coal seams and surrounding strata after the gasification process. Thus, a new approach for utilisation of carbon dioxide resulting from coal combustion was developed to provide a coupled technology also comprising geological storage of excessive carbon dioxide. A theoretical feasibility study considering UCG-Urea process economics and potentials of UCG and carbon dioxide storage in the gasified strata was conducted for a selected study area in northern Bangladesh revealing the high competitiveness of the combined technology on the international feedstock markets.