• Energy Research
• natural sciences close
• IN close
• Sustainability close

Removal of Reactive Black 5 (RB5) dye from an aqueous solution was studied by its adsorption on banana peel biochars (BPBs). The factors affecting RB5 dye adsorption such as pH, exposure time, RB5 dye concentration, adsorbent dose, particle size and temperature were investigated. Maximum 97% RB5 dye removal was obtained at pH 3 with 75 mg/L adsorbate concentration by banana peel biochars. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) were used to characterize the adsorbent material. The data of equilibrium were analyzed by Langmuir and Freundlich isotherm models. The experimental results were best reflected by Langmuir isotherm with maximum 7.58 mg/g adsorption capacity. Kinetic parameters were explored and pseudo-second order was found suitable which reflected that rate of adsorption was controlled by physisorption. Thermodynamic variables exhibited that the sorption process was feasible, spontaneous, and exothermic in nature. Banana peel biochar showed excellent regeneration efficiency up to five cycles of successive adsorption-desorption. Banana peel biochar maintained >38% sorption potential of RB5 dye even after five cycles of adsorption-desorption. The phytotoxic study exhibited the benign nature of BPB-treated RB5 dye on tomato seeds.

The study aimed to determine Aluminum sludge composition and structure for its valorisation as an alternative natural material for heavy metals removal from wastewater for further reuse as treated water in different applications. The study was conducted to investigate the introduction of Al-bearing sludge composition. The physical and chemical properties were examined using X-ray diffraction tests (XRD), scanning electron microscope tests (SEM), Fourier-transform infrared tests (FTIR), and Brunauer-Emmett-Teller tests (BET). Furthermore, the heavy metal concentrations of synthetic wastewater were measured using the spectrophotometry method. The experimental procedure is based on testing different pH limits and amounts of aluminum sludge to find the optimum conditions for copper (Cu) and zinc (Zn) removal. The results demonstrated a high removal efficiency where its value reached up to 97.4% and 96.6% for Zn and Cu, respectively, in an acidic medium (pH = 6) using a relatively high amount of sludge (1400 mg). Nevertheless, a low efficiency was obtained in the strongly acidic medium (pH = 4) and a smaller sludge amount of about 480 mg.

Saffron, also known as “the golden spice”, is one of the most expensive crops in the world. The expensiveness of saffron comes from its rarity, the tedious harvesting process, and its nutritional and medicinal value. Different countries of the world are making great economic growth due to saffron export. In India, it is cultivated mostly in regions of Kashmir owing to its climate and soil composition. The economic value generated by saffron export can be increased manyfold by studying the agronomical factors of saffron and developing a model for artificial cultivation of saffron in any season and anywhere by monitoring and controlling the conditions of its growth. This paper presents a detailed study of all the agronomical variables of saffron that have a direct or indirect impact on its growth. It was found that, out of all the agronomical variables, the important ones having an impact on growth include corm size, temperature, water availability, and minerals. It was also observed that the use of IoT for the sustainable cultivation of saffron in smart cities has been discussed only by very few research papers. An IoT-based framework has also been proposed, which can be used for controlling and monitoring all the important growth parameters of saffron for its cultivation.

Soil salinity and the use of saline groundwater are two major constraints in crop production, which covers a ~1.0 billion ha area of arid and semi-arid regions. The improved drainage function of soil can modify the salty growing environment for higher agricultural production. The present study evaluated the effectiveness of cut-soiler-constructed rice residue-filled preferential shallow subsurface drainage (PSSD) to improve the drainage function and its effect on the yield, quality and plant–water relations of mustard over 2019–2021. Cut-soiler-simulated drains were made in a semi-controlled lysimeter (2 × 2 × 3; L*W*H m) as the main plot treatment in a double replicated split–split experiment with two soil types (subplot) and three irrigation water salinities (4, 8 and 12 dS m−1) as the sub-sub-plot treatment. The drainage volume of variable salinity (EC), dependent on the total water input, was substantially higher in the rainy season (April to October), i.e., 16.6, 7.76 and 12.0% during 2018, 2019 and 2020, with 1.7, 0.32 and 0.77 kg salt removal per lysimeter, compared to the post-rainy season. The mustard seed, straw and biological yields were improved by 31.4, 14.41 and 18.08%, respectively, due to a positive effect on plant–water relations. The mustard seeds produced in the cut-soiler-treated plots recorded higher oil, crude fiber and protein contents and a lower erucic acid content. The increase in salt load, by higher-salinity irrigation water, was also efficiently managed by using cut-soiler PSSD. It was found that the saline irrigation water up to 12.0 dS m−1 can be used under such PSSD without any extra salt loading. The present study showed the potential of cut-soiler PSSD in root zone salinity management by improving drainage in salt-affected arid regions.

This study evaluated the efficacy of enzyme induced calcite precipitation (EICP) in restricting the mobility of heavy metals in soils. EICP is an environmentally friendly method that has wide ranging applications in the sustainable development of civil infrastructure. The study examined the desorption of three heavy metals from treated and untreated soils using ethylene diamine tetra-acetic acid (EDTA) and citric acid (C6H8O7) extractants under harsh conditions. Two natural soils spiked with cadmium (Cd), nickel (Ni), and lead (Pb) were studied in this research. The soils were treated with three types of enzyme solutions (ESs) to achieve EICP. A combination of urea of one molarity (M), 0.67 M calcium chloride, and urease enzyme (3 g/L) was mixed in deionized (DI) water to prepare enzyme solution 1 (ES1); non-fat milk powder (4 g/L) was added to ES1 to prepare enzyme solution 2 (ES2); and 0.37 M urea, 0.25 M calcium chloride, 0.85 g/L urease enzyme, and 4 g/L non-fat milk powder were mixed in DI water to prepare enzyme solution 3 (ES3). Ni, Cd, and Pb were added with load ratios of 50 and 100 mg/kg to both untreated and treated soils to study the effect of EICP on desorption rates of the heavy metals from soil. Desorption studies were performed after a curing period of 40 days. The curing period started after the soil samples were spiked with heavy metals. Soils treated with ESs were spiked with heavy metals after a curing period of 21 days and then further cured for 40 days. The amount of CaCO3 precipitated in the soil by the ESs was quantified using a gravimetric acid digestion test, which related the desorption of heavy metals to the amount of precipitated CaCO3. The order of desorption was as follows: Cd > Ni > Pb. It was observed that the average maximum removal efficiency of the untreated soil samples (irrespective of the load ratio and contaminants) was approximately 48% when extracted by EDTA and 46% when extracted by citric acid. The soil samples treated with ES2 exhibited average maximum removal efficiencies of 19% and 10% when extracted by EDTA and citric acid, respectively. It was observed that ES2 precipitated a maximum amount of calcium carbonate (CaCO3) when compared to ES1 and ES3 and retained the maximum amount of heavy metals in the soil by forming a CaCO3 shield on the heavy metals, thus decreasing their mobility. An approximate improvement of 30% in the retention of heavy metal ions was observed in soils treated with ESs when compared to untreated soil samples. Therefore, the study suggests that ESs can be an effective alternative in the remediation of soils contaminated with heavy metal ions.

Recent years have seen a rise in the frequency and severity of extreme rainstorm events, which have caused widespread damage and death in numerous cities. The manufacture and use of storm drainage materials result in numerous environmental concerns in the construction industry. Green materials for storm drainage networks are environmentally friendly compared to their traditional counterparts. Identifying and assessing sustainability criteria for green materials for storm drain networks has been challenging. This study aims to determine the critical criteria for selecting green materials for storm drainage networks using a stationary analysis approach. To this end, a questionnaire survey was administered to Egyptian storm engineers to assess their importance based on a selection criteria 29 green materials. From the results obtained, “Operation and maintenance cost” and “Use of local material” were seen to be the “stationary materials”. The obtained findings in this research pave the way for the Egyptian storm industry towards becoming environmentally friendly, which will in turn improve the functioning mechanism of sewer networks.

This work intended to explore some motivations that influence people’s eating habits towards sustainability. This was an observational, cross-sectional study, carried out by questionnaire survey on a non-probabilistic sample of 10,067 participants from 13 countries (Argentina, Brazil, Croatia, Greece, Hungary, Latvia, Lithuania, Poland, Portugal, Serbia, Slovenia, Romania and United States). Results indicated that people prefer fresh local foods from the season, being important because it allows transportation and storage to be reduced, which in many cases implies refrigeration systems and consequent energy expenditure. Although people avoid food waste at home, the awareness for the waste at restaurants still needs to be improved. Consumers seem to prefer foods that have been produced and packed in sustainable ways but still give importance to the package—understandable for food products. The results also indicated significant differences in the food choice motivations between groups for all sociodemographic variables tested (age, sex, marital status, education, professional area, living environment and country), but the association was high only for variable country. Additionally, a tree classification analysis allowed to identify the relative importance of the influential variables on the sustainable food choices, with country being the most important, followed by age and sex. Additionally, discriminant function analysis allowed establishing a model for the relation between country and six variables accounting for preservation of biodiversity, respect for life, save natural resources, save energy, reduce industrial pollution and minimal packaging. Although with some limitations, this study brings valuable insight into some aspects linked with sustainable food choices on a number of countries and how people shape their food choices according to some sustainability issues.

Air pollution is a major issue all over the world because of its impacts on the environment and human beings. The present review discussed the sources and impacts of pollutants on environmental and human health and the current research status on environmental pollution forecasting techniques in detail; this study presents a detailed discussion of the Artificial Intelligence methodologies and Machine learning (ML) algorithms used in environmental pollution forecasting and early-warning systems; moreover, the present work emphasizes more on Artificial Intelligence techniques (particularly Hybrid models) used for forecasting various major pollutants (e.g., PM2.5, PM10, O3, CO, SO2, NO2, CO2) in detail; moreover, focus is given to AI and ML techniques in predicting chronic airway diseases and the prediction of climate changes and heat waves. The hybrid model has better performance than single AI models and it has greater accuracy in prediction and warning systems. The performance evaluation error indexes like R2, RMSE, MAE and MAPE were highlighted in this study based on the performance of various AI models.