• Energy Research
• 6. Clean water close
• PL close
• IT close
• EU close
• Energies close

Microbial electrochemical technologies (METs) constitute the core of a number of emerging technologies with a high potential for treating urban wastewater due to a fascinating reaction mechanism—the electron transfer between bacteria and electrodes to transform metabolism into electrical current. In the current work, we focus on the model electroactive microorganism Geobacter sulfurreducens to explore both the design of new start-up procedures and electrochemical operations. Our chemostat-grown plug and play cells, were able to reduce the start-up period by 20-fold while enhancing chemical oxygen demand (COD) removal by more than 6-fold during this period. Moreover, a filter-press based bioreactor was successfully tested for both acetate-supplemented synthetic wastewater and real urban wastewater. This proof-of-concept pre-pilot treatment included a microbial electrolysis cell (MEC) followed in time by a microbial fuel cell (MFC) to finally generate electrical current of ca. 20 A·m−2 with a power of 10 W·m−2 while removing 42 g COD day−1·m−2. The effective removal of acetate suggests a potential use of this modular technology for treating acetogenic wastewater where Geobacter sulfurreducens outcompetes other organisms.

The choice of optimal plant species for phytoremediation and organic fertilization plays an important role in stabilizing the functions of soils contaminated with heavy metals. The influence of nickel, cobalt and cadmium on the biomass yield and calorific value of Festuca rubra, heavy metal concentrations in soil and plants and the microbiological, biochemical and physicochemical proprieties of soil were analyzed in a pot experiment. The tolerance index (TI) describing Festuca rubra’s ability to tolerate heavy metals, as well as the translocation (TF), accumulation (AF) and bioaccumulation (BF) factors of heavy metals in Festuca rubra were calculated. The experiment was conducted in two series: In soil fertilized and not fertilized with compost. Nickel and cobalt significantly inhibited the growth and development of Festuca rubra. The experiment demonstrated that this plant species can be grown on soil contaminated with heavy metals. Festuca rubra contained on average 46.05% C, 34.59% O, 5.91% H, 3.49% N, 0.19% S and 9.76% ash. Festuca rubra has a stable calorific value which is not affected by heavy metals; therefore, biomass harvested from heavy metal-polluted soil can be used for energy generation. The calorific value of Festuca rubra ranged from 15.924 to 16.790 MJ kg−1 plant d.m., and the heat of combustion from 17.696 to 18.576 MJ kg−1. It has a stable calorific value which is not affected by heavy metals, therefore biomass harvested from heavy metal-polluted soil can be used for energy generation. Festuca rubra is particularly useful for the phytostabilization of soil contaminated with cadmium and cobalt. Compost minimizes the adverse effects of heavy metal pollution on the microbiological, biochemical and physicochemical properties of soil.

A natural radioactivity in thermal water was investigated based on 19 selected thermal waters from Poland. The analysed results show that the radionuclides’ concentrations in the study waters vary over a wide range. The temperature of the waters varies from above 20 °C to above 80 °C. The waters are characterised by different mineralisation, chemical compositions, and belong to different hydrochemical types. There is a good correlation between the water temperature and the depths of the aquifer formations occurrence, suggesting the thermal energy originates from the thermal geogradient. The concentration of radium is well correlated with the water mineralisation. The ratio of radium activity (226Ra/228Ra) in groundwater relates not only the ratio of uranium activity to that of thorium (238U/232Th) in aquifer formation, but also depends on the physical and chemical water properties. Based on the concentration of radon and its transport model, the radiation exposures due to inhalation of 222Rn and its progeny for employees and clients of the spa were assessed. The use of the thermal waters as a drinking resource may be problematic due to the possibility of exceeding the recommended annual committed effective dose 0.1 mSv.

Bioenergy production from animal waste can be a key driver to achieving bio-economy goals. Developing a bio-economy sector could help to create opportunities for a circular system where not only people and the planet will be benefited, but it will also provide economic profitability to farmers, especially in the post-Covid period. To this end, manure production, its nutrient content, and bioenergy potential were estimated, along with their spatial distribution in the Lubelskie province, Poland. Farm-level data were processed and aggregated at the municipality level. Material balance equations were used to calculate the theoretical potential of livestock manure and bioenergy for different use scenarios: (1) Baseline (BC): direct manure application to land, which was compared against (2) Anaerobic Digestion (AD): anaerobic digestion to biogas with digestate returned to the fields (3) AD + Separation (AD + Sep): mechanical separation followed by anaerobic digestion, and (4) Surplus + AD: surplus manure (after application to the fields) is sent to anaerobic digestion. Manure, biogas, electricity, and thermal energy production of the AD scenario were estimated to be 7.5 Mt y−1, 378 Mm3 y−1, 907 GWe y−1, and 997.8 GWth y−1, respectively. The scenario, including mechanical separation followed by anaerobic digestion (AD + Sep), contributed to avoiding emissions to the largest extent (1 Mt CO2 eq), whereas AD outperformed the others in avoiding costs of fertilization. According to the estimated potential and the environmental cost-effectiveness of AD, new plants can be established that will recycle manure through bioenergy production, and, subsequently, the digestate can be applied as organic fertilizer, closing the nutrients cycle.

(1) Background: sewage sludge is a by-product of wastewater treatment, which needs to be managed appropriately, e.g., in composting processes. The application of municipal sewage sludge composts (MSSCs) as a soil amendment is a potential way to effectively manage sewage sludge. (2) Methods: this paper presents the results of a vegetation pot experiment undertaken to assess the suitability of Dactylis glomerata L. and MSSC in the aided phytostabilization technique when applied on soils from an area effected by industrial pressure; this is characterized by high levels of heavy metal (HM). The contents of HMs in the test plant (the roots and above-ground parts), as well as in the soil and MSSC, were determined via an atomic spectrometry method. (3) Results: the application of MSSC positively contributed to an increased production of plant biomass and an increase in the pH in the soil. Concentrations of Cu, Cd, Pb, Zn, and Cr were higher in the roots than in the above-ground parts of Dactylis glomerata L. The addition of MSSC contributed most significantly to the considerable reduction in Ni, Pb, and Zn contents in the soil after the experiment. (4) Conclusions: MSSC can support the phytostabilization of soils contaminated with high levels of HMs.

With the increasing needs of clean water supplies, the use of biomass wastes and residues for environmental remediation is essential for environmental sustainability. In this study, the residues from winery and citrus juice industries, namely grape skin and orange peel, respectively, were first converted to hydrochars by hydrothermal carbonization (HTC) and then a cationic dye (methylene blue) adsorption was studied on hydrochars. Hydrochars from both feedstocks were produced at three different temperatures (180, 220, and 250 °C) and a fixed residence time (1 h) to evaluate the hydrochar’s performance on the dye adsorption. The hydrochars were characterized in terms of their pH, pH at point of zero charge (pHPZC), surface functionalities, and surface area. A batch adsorption study of the dye was carried out with variable adsorbate concentration, pH, and temperature. Two adsorption isotherms namely Langmuir and Freundlich models were fitted at 4, 20, and 36 °C. The thermodynamic properties of adsorption (Gibbs free energy (ΔG), enthalpy (ΔH) and entropy (ΔS)) were evaluated from the isotherms fittings. Results showed that the dye adsorption on both hydrochars was significant and followed Langmuir isotherm. The maximum adsorption capacity on citrus waste hydrochar was higher than the winery waste hydrochar at any corresponding HTC temperature. Although hydrochars showed the lowest surface area (46.16 ± 0.11 and 34.08 ± 1.23 m2/g for citrus and winery wastes, respectively) at 180 °C, their adsorption was the highest, owing to their maximum density of total oxygen functional groups (23.24 ± 0.22 and 32.69 ± 1.39 µmol/m2 for citrus and winery wastes, respectively), which decreased with the increase in HTC temperature. This research shows a sustainable route for the production of highly effective adsorbent materials at lower HTC temperatures from citrus and winery wastes.