• Energy Research
• Restricted close
• IT close

Landfill gas (LFG) tends to escape from the landfill surface even when LFG collecting systems are installed. Since LFG leaks are generally a noticeable percentage of the total production of LFG, the optimisation of the collection system is a fundamental step for both energy recovery and environmental impact mitigation. In this work, we suggest to take into account the results of direct measurements of gas fluxes at the air-cover interface to achieve this goal.During the last 5 years (2004-2009), 11 soil gas emission surveys have been carried out at the Municipal Solid Waste landfill of Legoli (Peccioli municipality, Pisa Province, Italy) by means of the accumulation chamber method. Direct and simultaneous measurements of CH(4) and CO(2) fluxes from the landfill cover (about 140,000 m(2)) have been performed to estimate the total output of both gases discharged into the atmosphere. Three different data processing have been applied and compared: Arithmetic mean of raw data (AMRD), sequential Gaussian conditional simulations (SGCS) and turning bands conditional simulations (TBCS). The total amount of LFG (captured and not captured) obtained from processing of direct measurements has been compared with the corresponding outcomes of three different numerical models (LandGEM, IPCC waste model and GasSim).Measured fluxes vary from undetectable values (<0.05 mol m(-2) day(-1) for CH(4) and <0.02 mol m(-2) day(-1) for CO(2)) to 246 mol m(-2) day(-1) for CH(4) and 275 mol m(-2) day(-1) for CO(2). The specific CH(4) and CO(2) fluxes (flux per surface unit) vary from 1.8 to 7.9 mol m(-2) day(-1) and from 2.4 to 7.8 mol m(-2) day(-1), respectively.The three different estimation methodologies (AMRD, SGCS and TBCS) used to evaluate the total output of diffused CO(2) and CH(4) fluxes from soil provide similar estimations, whereas there are some mismatches between these results and those of numerical LFG production models. Isoflux maps show a non-uniform spatial distribution, with high-flux zones not always corresponding with high-temperature areas shown by thermographic images.The average value estimated over the 5-year period for the Legoli landfill is 245 mol min(-1) for CH(4) and 379 mol min(-1) for CO(2), whereas the volume percentage of CH(4) in the total gas discharged into the atmosphere varies from 29% to 51%, with a mean value of 39%. The estimated yearly emissions from the landfill cover is about 1.29 x 10(8) mol annum(-1) (2,100 t year(-1)) of CH(4) and 1.99 x 10(8) mol annum(-1) (8,800 t year(-1)) of CO(2). Considering that the CH(4) global warming potential is 63 times greater than that of CO(2) (20 a time horizon, Lashof and Ahuja 1990), the emission of methane corresponds to 130,000 t annum(-1) of CO(2).The importance of these studies is to provide data for the worldwide inventory of CH(4) and CO(2) emissions from landfills, with the ultimate aim of determining the contribution of waste disposal to global warming. This kind of studies could be extended to other gas species, like the volatile organic compounds.

MILD combustion is a very attractive technology in energy production from diluted gas deriving from bio or thermochemical degradation of biomass for its intrinsic features. An effective use of such a technology for diluted fuel needs a thorough analysis of ignition and oxidation behavior to highlight the potential effects of the different fuel components on the basis of temperature and diluent/oxygen/fuel mixture composition. In this work ignition and oxidation of a model gas surrogating the gaseous fraction of biomass pyrolysis products containing C1-C2 species, CO and CO2 were experimentally and numerically studied in a wide range of temperature and overall composition in presence of large amount of CO2 or H2O. Experimental results showed that such species significantly alter the evolution of the ignition process in dependence on temperature range and mixture composition. Several kinetic models were tested to simulate experimental results. Significant discrepancies occur especially in case of steam dilution. Numerical analyses suggest that such diluents mainly act as third body species at low temperatures, conditioning both radicals production pathways and the relative weight of C1 oxidation/recombination routes, while strongly interact with the H2/O2 high temperature branching mechanisms at high temperatures. Further analyses are mandatory to improve the model ability to reduce the discrepancy between numerical and experimental data obtained in non standard conditions.

Clean combustion technologies, based on reactant dilution, have shown very peculiar and innovative characteristics. Reduction of light and noise emission and uniformity of temperature and composition distribution inside the combustion chamber, related to an extension of the reaction zone, make these processes very promising in several technological fields. Analysis of combustion in very diluted conditions is needed for a general understanding of these processes, which remain unknown from many aspects. The study is also useful for the identification of practical constraints which define the most suitable reactor configurations and working parameters for process reliability. The present work deals with a theoretical analysis of methane oxidation in diluted conditions using one of the detailed kinetic schemes available in the literature. A well-stirred reactor (WSR) configuration has been considered as a first attempt of process schematization. This choice is consistent with the experimental characterization of the flameless combustion processes. The influence of residence time, C/O ratio, and inlet temperature on the steady state was studied for an oxygen molar fraction (0.05), chosen as representative of flameless combustion processes. It has been pointed out that only rich conditions (C/O ? 0.25) are possible for WSR creation, because they allow partial methane conversion. Three kinetic regimes, related to different temperature ranges, have been identified on the basis of product distribution analysis. Both the oxidation and pyrolitic regimes, occurring respectively in low- and high-temperature ranges, are the most interesting working conditions for diluted combustion. The former, leading to CO and H2O as main reaction products, is suitable for reburning technology. The latter, which corresponds to large production of CO and H2, has been shown to be a reasonable explanation of flameless combustion. Advantages and potentials of this innovative process are analyzed, taking into account the kinetic pathway followed in the different working conditions.

The need for European concertation in the area of open archives will continue beyond the term of this project, whether through the continuation of the Open Archives Forum, or by some other means. This report documents a set of sustainability recommendations that have been planned by the project members and discussed with the OAI in US.

The transition to a low carbon future is starting to affect landscapes around the world. In order for this landscape transformation to be sustainable, renewable energy technologies should not cause critical trade-offs between the provision of energy and that of other ecosystem services such as food production. This literature review advances the body of knowledge on sustainable energy transition with special focus on ecosystem services-based approaches and methods. Two key issues emerge from this review: only one sixth of the published applications on the relation between renewable energy and landscape make use of the ecosystem service framework. Secondly, the applications that do address ecosystem services for landscape planning and design lack efficient methods and spatial reference systems that accommodate both cultural and regulating ecosystem services. Future research efforts should be directed to further advancing the spatial reference systems, the use of participatory mapping and landscape visualizations tools for cultural ecosystem services and the elaboration of landscape design principles.

Internal combustion engines are still the energy conversion units of choice in transport and distributed energy generation. Due to the fuel mix, spark ignition (SI) engines represent a viable solution that features improved fuel flexibility with respect to their compression ignition counterparts. Therefore, manufacturers are continuously trying to increase their performance and reduce emissions through experimental and numerical investigations. A growing trend in engine improvement is the application of simulations on a wider scale in order to contain development costs. Combustion is the most complex part of the working cycle and for SI power units, modeling flame propagation represents an essential feature of predictive numerical investigations. Within this context, the present study was aimed at better understanding the mass transfer between unburned and reacting gas, as well as characteristic reaction time scales within the reaction zone. A OD model with three zones was applied for different engine speed, load, air-fuel ratio and spark timing settings, chosen as representative for mid-road load automotive use. Combined in-cylinder pressure measurements and flame imaging were used for validating the essential concept of fresh charge entrainment and burn-up process. One major conclusion of the work was that there is a definite stratification of chemical species within the burned-reacting gas that can be well captured by the entrainment model. The fact that the calibration coefficients require different values for accurate prediction of the pressure traces during flame propagation, emphasizes the complexity of the combustion process, as well as the limitations of considering flames as laminar even at local scale. The study also identified the scale at which mass transfer takes place as an essential factor for correct turbulent combustion modeling. (C) 2015 Elsevier Ltd. All rights reserved.

Abstract The Mediterranean region is one of the most vulnerable regions to climate change. The majority of climate models forecast a rise in temperatures and less rainfall, which have been observed in recent decades. These changes will affect several vegetation properties, especially phenological dynamics and traits, by increasing drought intensity and recurrence. In this climate change context, the present study aims to assess the evolution of vegetation state and its relation with the climate dynamics in the Mediterranean forest region of northeast Tunisia using Land Surface Phenology (LSP) metrics and the vegetation index (NDVI) analysis from 2000 to 2017. To conduct this work, we used precipitation and temperature data from the two closest weather stations and 16-day NDVI composite images from the MODIS satellite source, with 250-m spatial resolution. Three phenological metrics— start of season (SOS), end of season (EOS), and length of season (LOS) — were obtained and compared for different vegetation types. The LSP variation in response to climatic metrics was also analyzed. The results showed that the LSP in our study area changed significantly during the 2000–2017 period, which includes an average 7.8 days delay in the SOS, an average advance in the EOS by 5 days, and LOS shortened by an average 12.8 days. Autumn (Pr_9) and spring (Pr_3 and P3_4) precipitations, as well as maximum temperature (Tx9+10), represent the best climate parameters to explain the changes in LSP. Both the NDVI and SPEI showed a significant high correlation (p

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.

The use of plastic materials in agriculture causes the serious drawback of huge quantities of waste. The introduction of biodegradable materials, which can be disposed directly into the soil, can be one possible solution to this problem. Biodegradable materials are actually innovative materials; therefore, their physical properties must be evaluated in relation to their functionality during the use in field. In the present research results of experimental tests carried out on biodegradable films used in strawberries protected cultivation are presented. The decay of some relevant physical parameters of biodegradable films during the cultivation period was monitored by laboratory tests (SEM analysis, mechanical tensile tests and infrared reflectance spectroscopy). Infrared spectroscopy clearly indicated that the mechanical degradation starts from the starch component of the material. Tensile tests showed that the value of elongation at break of biodegradable materials decreased in some cases by 300% after 10 days of field application