• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• Embargo close
• 11. Sustainability close
• 6. Clean water close
• DE close
• JP close

This paper presents a multi-objective optimization model for a long-term generation mix in Indonesia. The objective of this work is to assess the economic, environment, and adequacy of local energy sources. The model includes two competing objective functions to seek the lowest cost of generation and the lowest CO2 emissions while considering technology diffusion. The scenarios include the use of fossil reserves with or without the constraints of the reserve to production ratio and exports. The results indicate that Indonesia should develop all renewable energy and requires imported coal and natural gas. If all fossil resources were upgraded to reserves, electricity demand in 2050 could be met by domestic energy sources. The maximum share of renewable energy that can be achieved in 2050 is 33% with and 80% without technology diffusion. The least cost optimization produces lower generation costs than the least CO2 emissions, as well as the combined scenario. Total CO2 emissions in 2050 are five to six times as large as current emissions. The least CO2 emissions scenario can reduce almost half of the CO2 emissions of the least cost scenario by 2050. The proposed multi-objective optimization model leads some optimal solutions for a more sustainable electricity system.

Abstract Light wells in the centers of high-rise apartment buildings in Japan are called ‘Voids’. Gas water-heaters built into Voids discharge exhaust gas so a large enough opening has to be designed at the bottom of a Void to keep the indoor air quality (IAQ) acceptable. In order to secure the IAQ in the Void from contamination, a simple calculation method of the ventilation rate induced by wind force and thermal buoyancy through openings at the bottom, along with heat sources such as water-heaters, is presented. The accuracy of this calculation method was examined by wind tunnel testing. As a result, it turned out that the simple calculation methods introduced in this study were valid for predicting the vertical temperature distribution and ventilation rates in Voids.

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

Abstract A variety of novel, recyclable and reusable, construction materials has already been studied within literature during the past years, aiming at improving the overall energy efficiency ranking of the building envelope. However, several studies show that a delicate control of indoor climating elements can lead to a significant performance improvement by exploiting the building’s savings potential via smart adaptive HVAC regulation to exogenous uncertain disturbances (e.g. weather, occupancy). Building Optimization and Control (BOC) systems can be categorized into two different groups: centralized (requiring high data transmission rates at a central node from every corner of the overall system) and decentralized 1 (assuming an intercommunication among neighboring constituent systems). Moreover, both approaches can be further divided into two subcategories, respectively: model-assisted (usually introducing modeling oversimplifications) and model-free (typically presenting poor stability and very slow convergence rates). This paper presents the application of a novel, decentralized, agent-based , model-free BOC methodology (abbreviated as L4GPCAO) to a modern non-residential building (E.ON. Energy Research Center’s main building), equipped with controllable HVAC systems and renewable energy sources by utilizing the existing Building Management System (BES). The building testbed is located inside the RWTH Aachen University campus in Aachen, Germany. A combined rule criterion composed of the non-renewable energy consumption (NREC) and the thermal comfort index – aligned to international comfort standards – was adopted in all cases presented herein. Besides the limited availability of the specified building testbed, real-life experiments demonstrated operational effectiveness of the proposed approach in BOC applications with complex, emerging dynamics arising from the building’s occupancy and thermal characteristics. L4GPCAO outperformed the control strategy that was designed by the planers and system provider, in a conventional manner, requiring no more than five test days.

SummaryThe German government has adopted a law that requires sewage plants to go beyond the recovery of phosphorus from wastewater and to promote recycling. We argue that there is no physical global short‐ or mid‐term phosphorus scarcity. However, we also argue that there are legitimate reasons for policies such as those of Germany, including: precaution as a way to ensure future generations’ long‐term supply security, promotion of technologies for closed‐loop economics in a promising stage of technology development, and decrease in the current supply risk with a new resource pool.

Abstract A small reverse osmoisis (RO) plant supplied by a photovoltaic (PV) power supply has been installed at the island of Gran Canaria. On behalf of this system the feasibility of small PV-RO systems (1 m3/d) is investigated. The RO-plant is described in detail concerning its technical specifications, its operation constraints and its energy demand. Furthermore the photovoltaic power supply is described in detail. With simulations it is shown how the system is designed to guarantee a reliability of more than 96% in the water supply. A brief economic analysis shows that the water production costs are still high (about 16 $/m3) but can be lowered in future.

Nuclear power generation is now one of the most important technologies in the energy supply in Japan. The operational experience of nuclear power plants for more than 20 years in Japan has shown that water chemistry is a key technology for safer and more economical operation of nuclear power plants. Extensive efforts have been made in the field of water chemistry to achieve the targets of radiation field control, to keep the integrities of piping and fuel elements and to reduce the radioactive waste generation. This paper briefly describes the present status of Japanese water chemistry technology with the main emphasis placed on BWRs.

Abstract Since the adoption of the Kyoto protocol in 1997 and its entry into force in 2005, as well its aftermath such as the Doha amendment and Paris agreement, national policies have become more conscious of the usage of clean energy, mostly the different forms of renewable energy and nuclear energy. Ratifying countries and signatories had committed themselves to binding targets for the reduction of greenhouse emissions by 8% with respect to 1990 levels until 2012, also based on the particular contribution to global emissions from each country. This paper examines the integrational properties of clean energy consumption from eight emerging economies which are also high greenhouse gas emitters. The empirical results show that the clean energy consumption is stationarity for Brazil and Philippines by using a quantile unit root test without smooth breaks (Koenker and Xiao, 2004). However, after capturing the smooth breaks (Bahmani-Oskooee et al., 2018), we find the clean energy consumption of China, Pakistan and Thailand are stationary. The time-varying deterministic trend with smooth breaks is more fitted to the path of clean energy consumption in comparison to the deterministic trend without smooth breaks. The paper suggests economic insights useful for policy making.

With the spotlight on smart grid development around the world, it is critical to recognize the key factors contributing to changing power system characteristics. This is more apparent in distribution systems with the integration of renewable energy sources, energy storage, and microgrid development. Utilities are also focusing on the reliability and resiliency of the grid. These activities require distribution automation (DA) strategies that take advantage of available technologies while promoting newer solutions. It is necessary to create a roadmap for holistic DA strategies in a smarter grid. Sustainable and resilient grid development is a paradigm shift requiring a new line of thinking in the engineering, operation, and maintenance of the power system. International perspectives on DA are also addressed, with the understanding that one solution will not fit all. Integrating technical, business, and policy decisions into the challenges will generate the development of technologies, standards, and implementation of the overall solution. The challenges in the development of industry standards are also discussed. This paper explores the challenges and opportunities in the changing landscape of the distribution systems. Evolution of technologies and the business case for infrastructure investment in distribution systems are covered in another paper by the same authors.