• Energy Research
• KR close

The ‘4 per mille Soils for Food Security and Climate’ was launched at the COP21 with an aspiration to increase global soil organic matter stocks by 4 per 1000 (or 0.4 %) per year as a compensation for the global emissions of greenhouse gases by anthropogenic sources. This paper surveyed the soil organic carbon (SOC) stock estimates and sequestration potentials from 20 regions in the world (New Zealand, Chile, South Africa, Australia, Tanzania, Indonesia, Kenya, Nigeria, India, China Taiwan, South Korea, China Mainland, United States of America, France, Canada, Belgium, England & Wales, Ireland, Scotland, and Russia). We asked whether the 4 per mille initiative is feasible for the region. The outcomes highlight region specific efforts and scopes for soil carbon sequestration. Reported soil C sequestration rates globally show that under best management practices, 4 per mille or even higher sequestration rates can be accomplished. High C sequestration rates (up to 10 per mille) can be achieved for soils with low initial SOC stock (topsoil less than 30 t C ha− 1), and at the first twenty years after implementation of best management practices. In addition, areas which have reached equilibrium will not be able to further increase their sequestration. We found that most studies on SOC sequestration only consider topsoil (up to 0.3 m depth), as it is considered to be most affected by management techniques. The 4 per mille number was based on a blanket calculation of the whole global soil profile C stock, however the potential to increase SOC is mostly on managed agricultural lands. If we consider 4 per mille in the top 1m of global agricultural soils, SOC sequestration is between 2-3 Gt C year− 1, which effectively offset 20–35% of global anthropogenic greenhouse gas emissions. As a strategy for climate change mitigation, soil carbon sequestration buys time over the next ten to twenty years while other effective sequestration and low carbon technologies become viable. The challenge for cropping farmers is to find disruptive technologies that will further improve soil condition and deliver increased soil carbon. Progress in 4 per mille requires collaboration and communication between scientists, farmers, policy makers, and marketeers.

Turbulence and pressure fluctuations are key elements in the bed protection design of hydraulic structures. However, their roles in a hydraulic jump are not yet fully understood, and the nature of their relationships are not conclusive. In order to better understand the relationships between pressure fluctuations and flow characteristics of a hydraulic jump downstream of a weir, detailed measurements of flow kinematics using the nonintrusive techniques of particle image velocimetry and bubble image velocimetry and pressure using voltage-type pressure gauges were carried out in this study. The physical modeling of the hydraulic jump was carried out using the simultaneous measurements of pressure and turbulent flow properties. The distributions of flow properties, such as water level and velocity, were assessed in each case. Based on the measurements, the correlations between the pressure fluctuations and the variables were investigated by coupling the statistical values of the variables at the same points. The analysis results show that the water level and turbulence intensity are the main factors influencing the pressure fluctuations in the hydraulic jump. Using these factors, an empirical formula and dimensionless numbers are proposed to show that the pressure fluctuations depend on the bubble flow behavior.

AbstractA novel multifunctional conjugated polymer (RCP‐1) composed of an electron‐donating backbone (carbazole) and an electron‐accepting side chain (cyanoacetic acid) connected through conjugated vinylene and terthiophene has been synthesized and tested as a photosensitizer in two major molecule‐based solar cells, namely dye sensitized solar cells (DSSCs) and organic photovoltaic cells (OPVs). Promising initial results on overall power conversion efficiencies of 4.11% and 1.04% are obtained from the basic structure of DSSCs and OPVs based on RCP‐1, respectively. The well‐defined donor (D)‐acceptor (A) structure of RCP‐1 has made it possible, for the first time, to reach over 4% of power conversion efficiency in DSSCs with an organic polymer sensitizer and good operation stability.

One of main concepts involved in regional small nuclear reactors is unmanned remote control. Internet-based virtual private networks provide environments for the remote monitoring and control of geographically-dispersed systems, and with the advances in communication technologies, the potential of networks for real time control and automation becomes enormous. However, networked control has some problems. The most critical is delay in signal transmission, which degrades system stability and performance. Therefore, a networked control system should be designed to account for delay. This paper proposes some design approaches for a delay-tolerant system that can guarantee predetermined stability margins and performance. To accomplish this, the reactor plant is modeled with consideration of uncertainties. With this model, three kinds of controllers are developed using different methods. The designed systems are compared with respect to stability and performance, and a second-order controller designed using the table lookup method was found to give the most satisfactory results.

Abstract Energy harvesting in natural environment has attracted a great deal of attention to generate stable and continuous electrical energy. In this work, we proposed an advanced pyroelectric energy harvesting system by using form-stable phase change material (PCM) composites. The PCM composite connected pyro-electrode generated electrical polarization due to the change of external environment. Polyethylene glycol (PEG) and 1-tetradecanol (1-TD) composites with different phase transition field induced the temperature difference during light-on/-off process. Poly(vinylidene difluoride) (PVDF) was utilized for pyroelectric energy harvesting. The PVDF based pyro-electrode was applied changing the conditions of solar light irradiation and heat air flow. The PCM composites controlled the temperature fluctuation effectively and generated stable output electrical voltage and current. Numerical simulation was carried out to provided in-depth insight into the underlying physics of the system. We envisage that the developed thermal energy harvesting system can pave a way towards high-throughput and sustainable energy harvesting.

Abstract In this work, earth-abundant CZTSSe thin film solar cells were fabricated by sulfo-selenization of the Mo/Zn/Cu/Sn/Cu metallic precursors. The influences of morphological and compositional properties of the absorbers on performance of solar cells were investigated by tuning Cu content in the films. The Raman analysis showed that absorbers consist of a kesterite CZTSSe phase with ZnSe as a minor secondary phase. X-ray photoelectron spectroscopy (XPS) analyses revealed that the surfaces are Cu depleted and Zn enriched compared with the bulk composition of the absorbers. The results indicate that during sulfo-selenization the Cu diffused into the film and the Zn towards the film surface. The performance of the solar cells initially improved with the increasing of the Cu content and then decreased. By tuning the Cu content in the absorbers, the minority-carrier life time improved from 0.8 to 1.6 ns. The power conversion efficiency increased from 5.1 to 8.03% with fine controlling of Cu composition of the CZTSSe absorbers. The diode-ideality factors are higher than 2, suggesting an increased interfacial recombination in the devices. The high ideality-factors A and low minority carrier life times may originate from surface and bulk related defects, which in turn limits the Voc and the achievable high conversion efficiency for the CZTSSe thin film solar cells.

Several methods were known to observe the cloud height. Since the meteorological administration mainly has been using human eye method, an automatic cloud height observer is proposed to reduce human errors.The proposed cloud observer system is for the cloud automatic observation system which has been operating at weathers stations in Korea since 1993. The high hand camera is adapted to get high resolution images without a capture board that has the low resolution. And the man-made passive filter for extracting sky reign is replaced by the active filter using image processing. The famous BRISK matching is selected instead of the block mating to get more precise disparity form a pair of stereo image.The Cloud cover announced by the Korean Meteorological Agency is the eye observation result nowadays, even though an intelligent cloud observation system was supplied. The reason is the impermissible error in the observed data of the automatic observation system. The current system is applied a man-made passive filter has to be changed periodically due to the boundary transition, but the proposed system is maintenance-free, since the active filter using edge detection algorithm automatically adjusts itself. The measuring of disparity which is important to analyze spatial information, has improved up to the resolution of observing height is 100m by getting image data directly form the high resolution camera, the old resolution from the capture board. Also, the disparity analyzing method is changed to the BRISK matching algorithm instead of the block mating algorism to get more deliberate disparity analysis since the dimension of the block is too big relatively compare to the cloud in the stereo all sky image. The test results are acceptable range which is human observation value ± 10% since the resolution of observing height is 100m at lower cloud in the sky. The proposed system is conducting the comparison research to compare with the result of reading satellite images and ceilometer.