• Energy Research
• 12. Responsible consumption close
• 11. Sustainability close
• KR close
• Bioresource Technology close

The current status and challenges associated with the production and utilization of cellulosic ethanol in Korea are reviewed in this paper. Cellulosic ethanol has emerged as a promising option for mitigating Korea's CO(2) emissions and enhancing its energy security. Korea's limited biomass resources is the most critical barrier to achieving its implementation targets for cellulosic ethanol. Efforts to identify new suitable biomass resources for cellulosic ethanol production are ongoing and intensive. Aquatic biomasses including macroalgae and plantation wastes collected in the Southeast Asia region have been found to have great potential as feedstocks for the production of cellulosic ethanol. R&D explorations into the development of technologies that can convert biomass materials to ethanol more efficiently also are underway. It is expected that cellulosic ethanol will be in supply from 2020 and that, by 2030, its use will have effectively reduced Korea's total gasoline consumption by 10%.

Sustainable aviation fuels (SAFs) can contribute reduce greenhouse gas emissions compared to conventional fuel. With the increasing SAFs demand, various generations of resources have been shifted from the 1st generation (oil crops), the 2nd generation (agricultural waste), to the 3rd generation (microalgae). Microalgae are the most suitable feedstock for jet biofuel production than other resources because of their productivity and capability to capture carbon dioxide. However, microalgae-based biofuel has a limitation of high freezing point. Recently, a jet biofuel derived from Euglena wax ester has been paying attention due to its low freezing point. Challenges still remain to enhance production yields in both upstream and downstream processes. Studies on downstream processes as well as techno-economic analysis on biofuel production using Euglena are highly limited to date. Economic aspects for the biofuel production will be ensured via valorization of industrial byproducts such as food wastes.

The macroalgal industry is expanding, and the quest for novel ingredients to improve and develop innovative products is crucial. Consumers are increasingly looking for natural-derived ingredients in cosmetic products that have been proven to be effective and safe. Macroalgae-derived compounds have growing popularity in skincare products as they are natural, abundant, biocompatible, and renewable. Due to their high biomass yields, rapid growth rates, and cultivation process, they are gaining widespread recognition as potentially sustainable resources better suited for biorefinery processes. This review demonstrates macroalgae metabolites and their industrial applications in moisturizers, anti-aging, skin whitening, hair, and oral care products. These chemicals can be obtained in combination with energy products to increase the value of macroalgae from an industrial perspective with a zero-waste approach by linking multiple refineries. The key challenges, bottlenecks, and future perspectives in the operation and outlook of macroalgal biorefineries were also discussed.

The co-digestion of multiple substrates is a promising method to increase methane production during anaerobic digestion. However, limited reliable data are available on the anaerobic co-digestion of food waste leachate with microalgal biomass. This report evaluated methane production by the anaerobic co-digestion of different mixtures of food waste leachate, algal biomass, and raw sludge. Co-digestion of substrate mixture containing equal amounts of three substrates had higher methane production than anaerobic digestion of individual substrates. This was possibly due to a proliferation of methanogens over the entire digestion period induced by multistage digestion of different substrates with different degrees of degradability. Thus, the co-digestion of food waste, microalgal biomass, and raw sludge appears to be a feasible and efficient method for energy conversion from waste resources.

Rhodococcus sp. YHY01 was studied to utilize various lignin derived aromatic compounds. It was able to utilize p-coumaric acid, cresol, and 2,6 dimethoxyphenol and resulted in biomass production i.e. 0.38 g dcw/L, 0.25 g dcw/L and 0.1 g dcw/L, and lipid accumulation i.e. 49%, 40%, 30%, respectively. The half maximal inhibitory concentration (IC50) value for p-coumaric acid (13.4 mM), cresol (7.9 mM), and 2,6 dimethoxyphenol (3.4 mM) was analyzed. Dimethyl sulfoxide (DMSO) solubilized barley straw lignin fraction was used as a carbon source for Rhodococcus sp. YHY01 and resulted in 0.130 g dcw/L with 39% w/w lipid accumulation. Major fatty acids were palmitic acid (C16:0) 51.87%, palmitoleic acid (C16:l) 14.90%, and oleic acid (C18:1) 13.76%, respectively. Properties of biodiesel produced from barley straw lignin were as iodine value (IV) 27.25, cetane number (CN) 65.57, cold filter plugging point (CFPP) 14.36, viscosity (υ) 3.81, and density (ρ) 0.86.

This study employed a simultaneous gas feeding and cell-recycled reaction (SGCR) system to ferment CO using Eubacterium limosum KIST612. A bubble column reactor was equipped with an ex-situ hollow fiber membrane module to enable cell recycling. The internal gas circulation rate was adjusted by controlling the pump speed to provide sufficient gas supplement to the microorganism. Gas feedings were conducted by either the use of a gas-tight bag (Batch), a pressurized gas cylinder (Continuous), or a sequential combination of the two (Mixed feeding). Mixed feeding mode achieved higher biomass (9.7 g/L) and acetate (9.8 g/L) concentrations than Batch mode (3.2 g/L biomass and 7.0 g/L acetate) or Continuous mode (5.0 g/L biomass and 8.1 g/L acetate). The high acetate titer in Mixed feeding mode was achieved due to the high concentration of cells secured in a short time at the initial operation stage and maintaining a high specific growth rate.

In recent years, lignocellulosic biomass has emerged as one of the most versatile energy sources among the research community for the production of biofuels and value-added chemicals. However, biomass pretreatment plays an important role in reducing the recalcitrant properties of lignocellulose, leading to superior quality of target products in bioenergy production. Among existing pretreatment techniques, liquid hot water (LHW) pretreatment has several outstanding advantages compared to others including minimum formation of monomeric sugars, significant removal of hemicellulose, and positive environmental impacts; however, several constraints of LHW pretreatment should be clarified. This contribution aims to provide a comprehensive analysis of reaction mechanism, reactor characteristics, influencing factors, techno-economic aspects, challenges, and prospects for LHW-based biomass pretreatment. Generally, LHW pretreatment could be widely employed in bioenergy processing from biomass, but circular economy-based advanced pretreatment techniques should be further studied in the future to achieve maximum efficiency, and minimum cost and drawbacks.

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

Lignocellulosic biomass is projected as a prospective renewable alternative to petroleum for the production of fuel and chemicals. Pretreatment is necessary to disrupt the lignocellulosic structure for extraction of cellulose. Biomass after pretreatment is segregated into cellulose rich solid fraction and black liquor (lignin and hemicelluloses) as a liquid stream. The plant polysaccharide-based industry primarily utilizes the cellulosic fraction as raw material, and carbon rich black liquor discarded as waste or burnt for energy recovery. This review highlights the recent advancements in the biological and chemical valorization of black liquor into fuels and chemicals. The recent research attempted for bioconversion of black liquor into Bioplastic, Biohydrogen, Biogas, and chemicals has been discussed. In addition, the efforts to replace the conventional energy recovery method with the advanced chemical process along with their modifications have been reviewed that will decide the sustainability of the lignocellulosic biomass-based industry.