• Energy Research
• NL close
• CN close
• English close

Currently active suspension system is more applicable than passive for improving the suspension performance, ensuring the stability and passenger safety in modern automotive suspension system. However, high energy consumption is one of the main disadvantages of implementing this system in real applications. In this paper, the energy consumption of electromagnetic actuators used for an active suspension system controlled by proportional-integral-derivative (PID), fuzzy adaptive PID, and neuron adaptive PID are investigated through simulation studies. Based on the energy consumption and the performance analysis, it has found that it is potential to develop a vibration energy recovery system to achieve the energy balance requirement in active suspension systems.

The EU has set out to reduce negative impacts from electricity generation on the environment, human health and towards our dependence on fossil fuels. As the fastest growing renewable source of electricity, photovoltaics plays an important role in the energy transition. The manufacturing of photovoltaic modules requires materials classified as critical, making them prone to supply disruptions. Although these materials are essential to the EU economy, they are not sufficiently recovered at the end of a photovoltaic module’s life. An alternative intermediate solution could be to extend the lifespan of existing modules, to slow down demand for these materials in the future. The aim of this study was to analyse the theoretical options and practical examples of product life extension strategies for photovoltaics. The R-Ladder was used as a guiding framework, which provided examples of life extension strategies. These include Reuse, Repair, Refurbishment, Remanufacture and Repurpose. Aspects for each of these strategies were analysed to find potential benefits and challenges related to four aspects: economics, environment, energy, and materials. The approach of this study includes a literature review to identify the life extension strategies discussed specifically for photovoltaics in the context of the circular economy. This was followed by a multi-case study on practical applications of Reuse, Repair and Repurposing of photovoltaic modules. Findings from literature and the case study were further supplemented with the insights from six experts. These experts had diverse backgrounds in research, manufacturing, and procurement to offer a variety of insights and perspectives on life extension strategies for photovoltaics. Finally, two scenarios were created for possible life extension pathways for used photovoltaic modules to illustrate the potential impacts compared to a commonplace premature replacement scenario. Economics and module performance are key factors in decision-making and acquisition of a photovoltaic ...

This deliverable includes the methodology in EnergyPROSPECTS for an in-depth study of energy citizenship. It features the criteria used for selecting the cases for indepth study, the list of cases selected for in-depth study as well as key research foci and empirical research questions.

Исследование ландшафтов всегда было традиционным научным направлением географии. В России подобная направленность исследований остаётся актуальной, несмотря на то, что термины «геоэкология» и «ландшафтная экология» сегодня более распространены в англоязычном научном сообществе. Наш краткий обзор показывает значительное ускорение антропогенных ландшафтных изменений в Европе, Центральной Азии и азиатской части России за последние пять десятилетий. Ландшафтные исследования в антропоцене должны быть направлены на достижение и сохранение устойчивости ландшафта при его высокой производительности, что включает в себя прекращение деградации ландшафтов, развитие культурных и сохранение природных ландшафтов. Чистая вода и чистый воздух, плодородные и здоровые почвы для производства продуктов питания и других экосистемных услуг, а также биологически разнообразная зеленая среда являются атрибутами ландшафтов, обеспечивающих выживание и благополучие населения. Дисциплинарные и междисциплинарные исследования должны генерировать знания, инновации и правила принятия действенных решений. Генерация знаний в глобализованном мире основана на сборе больших массивов данных и моделировании сценариев. Международные длительные полевые опыты и системы агроэкологического мониторинга будут предоставлять данные для экосистемных моделей и систем поддержки принимаемых решений. Landscape research has been a traditional scientific discipline of geography. This is still the case in Russia, whilst the terms geo-ecology and landscape ecology have become established in the English speaking scientific community. Our short review reveals huge and accelerating anthropogenic landscape transformations in Europe, Central Asia and Asian Russia since the end the 1960s. Landscape research in the Anthropocene has to focus on achieving landscape sustainability at high productivity. This includes halting landscape degradation, developing cultural landscapes, and maintaining semi-natural landscapes. Clean water and air, fertile and healthy soils for food and other ecosystem services and a green and bio-diverse environment are attributes of landscapes for the survival and well-being of humans. Research has to generate knowledge, innovations and decision rules by disciplinary, interdisciplinary and trans-disciplinary work. Knowledge generation in a globalized world is based on big data gathering and scenario modelling. International long-term experiments and agri-environmental monitoring systems will deliver data for ecosystem models and decision support systems.

The level of advancement in the understanding of the mechanical properties of volcanic rocks is comparatively lower than that of sedimentary rocks. As part of the SUCCEED Project (Synergetic Utilisation of CO2 Storage Coupled with Geothermal Energy Deployment), which aims to investigate the feasibility of injecting captured and produced CO2 into the reservoirs to enhance geothermal production and achieve permanent CO2 storage at the Hellisheiði Geothermal Field in Iceland, this experimental research provides significant insights into the petrophysical and mechanical properties of the volcanic rocks collected from surface outcrops. The subsurface in Hellisheiði is mainly built up of hyaloclastite formations and interglacial basaltic lavas. During a field campaign samples were collected in different outcrops, ensuring that the samples were of high quality and sufficiently diverse to enable comprehensive analysis. Four samples per block and rock type have been prepared from the collected blocks, and they have been subjected to different laboratory tests to evaluate their petrophysical properties, such as porosity, density, and permeability, and their geomechanical behavior, using Unconfined Compression Test (UCS), Active-Source Acoustic Test, and Splitting Tensile Strength Test. Additionally, laboratory experiments have been conducted to investigate the impact of rapid cooling on rock damage due to thermal fracturing. The results show that there are interdependent relationships between porosity, bulk density, ultimate strength, Young's modulus, and wave velocities that can be observed when considering average values per rock. The rocks studied showed a negative correlation between porosity and other parameters and a direct correlation between ultimate strength and Young's Modulus. When examining individual rock samples, no significant correlations were observed between porosity and other parameters, however, those correlations where evident when comparing between different rock types, emphasizing the importance of ...

Global endeavors to reduce emissions in the shipping industry are accelerating the interest in fuel cell systems. This paper explores the application of different fuel cell types (LT-PEMFC, HT-PEMFC and SOFC) in combination with different fuels (LH2, LNG,MeOH and NH3) in expedition cruise ships. An impact model is developed for the first design phase. The goal of this paper is to evaluate the impact of the combination of fuel cell system implementation and operational profile on expedition cruise vessels. Impact is expressed in ship size, capital cost, operational cost and emissions. The model takes into account: fuel storage, on-board fuel processing, fuel cell system characteristics, balance of plant components, fuel cost over operational lifetime and all onboard emissions. In the research, seven different fuel cell systems and three different hybridization strategies are considered. For the six best performing combinations of fuel cell system and hybridization strategy, the range, endurance and capacity requirements are systematically varied to determine whether the best performing option depends on these requirements. Finally, hybrid option 2 (using diesel generators to support during long transits) combined with a methanol fueled LT-PEMFC system results in the lowest newbuild price. This option does comply with emission regulations and CO2 goals for 2030. Hybrid option 2 combined with an LNG fueled LT-PEMFC system results in the lowest total cost (newbuild price and fuel cost). This option does comply with emission regulations, but does not meet CO2 goals for 2030. When it is desired to reach this CO2 target, hybrid option 2 with methanol fueled LT-PEMFC is also recommended from a total cost perspective. ; Marine Technology

River systems play an important role in the filling of sedimentary basins and record the history of external forcing processes, such as climate, tectonics and sea-level change, acting on them. They are potential reservoirs for oil, gas and water, and can host coal and placer mineral deposits. Because of the complex interplay between the external forcing processes, however, understanding of the genesis of the stratigraphy of river systems and interpreting the stratigraphy correctly is far from straightforward. Current conceptual models are oversimplified, and more insight into the impact of external forcing processes must be gained to improve these models. The aim of this study was to assess the impact of climate (i.e., discharge and sediment influx) on the development of the large-scale stratigraphic architecture of river systems, in isolation and in conjunction with sea-level fluctuations, through an analogue modelling approach. Analogue physical models reproduce the long-term average effects and products of the transport processes in a river system, rather than the transport processes themselves. An advantage of analogue modelling over numerical modelling is that it is hard to make the model fit preconceived notions about the results, making it possible to test and develop conceptual models. The impact of climate (i.e., discharge and sediment influx) on the large-scale stratigraphic architecture of river-delta-shelf-basin systems appears not to be as dominant as the impact of sea-level change, but it does significantly affect the smaller scale stratigraphic architecture, such as the relative size of systems tracts and the rate and extent of erosion. Furthermore, we found a fundamental difference between the impact of changes in discharge and the impact of changes in sediment influx on the yield and mass accumulation at the mouth of a river system. River systems can act as buffers for rapid changes in sediment influx, while they react very rapidly to changes in discharge. Thus, the small-scale stratigraphy at the river mouth is controlled mainly by changes in discharge, and the large-scale stratigraphy is controlled by changes in sediment influx (and sea-level fluctuations). Also, because the response of the river gradient to an increase in discharge is the opposite to its response to an increase in sediment influx (and vice versa), the mass accumulation at the river mouth, combined with the overall stratigraphic architecture of the system, can be used to constrain paleo-discharge and paleo-sediment influx scenarios. Finally, our experiments show that a complex stratigraphic architecture is not necessarily the result of complex forcing, but can result from very simple changes in discharge. To assess the development of the stratigraphy in physical models, a new method for processing the data obtained in the experiments was developed. Series of subsequent digital elevation models of the surface of the model are converted, using custom-made software, into synthetic three-dimensional stratigraphy, containing true isochronous surfaces. This data set contains the development of the system through time in three dimensions, and can be presented in various formats, such as geological maps, geological sections and Wheeler diagrams.