• Energy Research
• Open Access close
• Restricted close
• Embargo close
• 6. Clean water close
• 1. No poverty close
• PK close
• DK close

Microbial electrochemical technologies (METs) constitute the core of a number of emerging technologies with a high potential for treating urban wastewater due to a fascinating reaction mechanism—the electron transfer between bacteria and electrodes to transform metabolism into electrical current. In the current work, we focus on the model electroactive microorganism Geobacter sulfurreducens to explore both the design of new start-up procedures and electrochemical operations. Our chemostat-grown plug and play cells, were able to reduce the start-up period by 20-fold while enhancing chemical oxygen demand (COD) removal by more than 6-fold during this period. Moreover, a filter-press based bioreactor was successfully tested for both acetate-supplemented synthetic wastewater and real urban wastewater. This proof-of-concept pre-pilot treatment included a microbial electrolysis cell (MEC) followed in time by a microbial fuel cell (MFC) to finally generate electrical current of ca. 20 A·m−2 with a power of 10 W·m−2 while removing 42 g COD day−1·m−2. The effective removal of acetate suggests a potential use of this modular technology for treating acetogenic wastewater where Geobacter sulfurreducens outcompetes other organisms.

Evaporation experiments are frequently used to identify the hydraulic properties of soils by inverse simulations with the Richards equation or simplified calculation methods. Evaporation experiments with an extended instrumentation were conducted in a temperature-controlled lab. Evaporation rates were measured gravimetrically, soil water pressure head was measured using mini-tensiometers and relative humidity sensors, and soil temperature was measured using thermocouples. The measurements were evaluated by inverse modeling with the Richards equation and the soil hydraulic properties, i.e. the water retention and hydraulic conductivity curves, were identified. The dataset contains all experimental data and the results of the inverse simulation, i.e. fitted time series of pressure head and the identified soil hydraulic properties of two soils (sand and silt loam).

Microbial fuel cell (MFC) has received much attention in the last decade as a promising technology to simultaneously generate electricity and decontaminate wastewater. This study aims to quantitatively review the published literature on MFC, published in the period of 1970–2020, based on the Web of Science (WoS) database. For the first time in literature, a comprehensive quantitative review of MFC has been conducted by employing the technique of bibliometric and content analyses. A total of 11,397 publications have been retrieved from WoS, out of which 81.6% are research articles. The evaluation in the field of MFC has been mapped in various categories, such as publication history, publication distribution, subject category distribution, leading journals, leading countries and leading organizations in MFC research. Additionally, content analysis has been conducted to unearth the research trends in MFC; and some hot research topics in MFC have been spotted. Results depict that the period 2011–2020 has been the most appreciating era for MFC research, as it contributed 87% of the total publications. Among the subject categories, energy fuel and microbiology lead with contributions of 26.5% for each, butthe overall growth of the energy fuel category in the last decade has been the highest. Out of 1,147 journals publishing MFC research, Bioresource Technology is the leading one; and countries like China, USA and India are the main hub of MFC research with 26.47%, 16.95% and 7.69% contributions in publications, respectively. The hottest topics in MFC research are nanoparticles, catalysts, air electrodes, graphene electrodes, power enhancement, air cathode and nitrogen removal. Moreover, major research areas are engineering, energy fuels and biotechnology with each contribution 26.5% of the total publications.

Abstract This paper investigates the impact of urbanization on energy consumption by applying the Stochastic Impacts by Regression on Population, Affluence and Technology (STIRPAT) in case of Malaysia. The study covers the time period of 1970Q1–2011Q4. The unit root test and the ARDL bounds testing approach have been applied to examine integrating properties and long run relationship in the presence of structural breaks. Our results validated the existence of cointegration and exposed that urbanization is a major contributor in energy consumption. Affluence raises energy demand. Capital stock boosts energy consumption. Trade openness leads to affluence and hence increases energy consumption. The causality analysis finds that urbanization Granger causes energy consumption. The feedback effect is found between energy consumption and affluence and, energy consumption and capital. The bidirectional causality exists between trade openness and energy consumption.

Abstract Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 °C and for some experiments also at 37 °C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497, 487, 561, 582, 575, 359, 619 dm 3 kg −1 respectively, corresponding to 50–100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm −3 and 7 g N dm −3 respectively. Pretreatment (pasteurization: 70 °C, sterilization: 133 °C, and alkali hydrolysis (NaOH) had no effect on achieved methane yields. Mesophilic digestion was more stable than thermophilic digestion, and higher methane yield was noticed at high waste concentrations. The lower yield at thermophilic temperature and high waste concentration was due to ammonia inhibition. Co-digestion of 5% pork by-products mixed with pig manure at 37 °C showed 40% higher methane production compared to digestion of manure alone.

This work presents the characteristics of a solar thermal tower power plant in two different places (Seville and Dubai) using three different HTFs (NaNO3-KNO3, KCl-MgCl2 and Li2CO3-Na2CO3-K2CO3) and three different power cycles (Rankine, sCO2 Recompression and sCO2 Partial cooling cycles). An indirect configuration is considered for the Gemasolar power plant. Detailed modelling is carried out for the conversion of incident power on the heliostat to the output electricity. Optimization of the cycle is carried out to determine the most promising cycle configuration for efficiency. The results showed that for the Gemasolar power plant configuration, the performance of the KCl-MgCl2 based plant was poorest amongst all. NaNO3-KNO3 based plant has shown good performance with the Rankine cycle but plant having Li2CO3-Na2CO3-K2CO3 as HTF was best for all three cycles. Partial cooling was the best performing cycle at both locations with all three HTFs. Placing the Seville Plant in Dubai has improved the efficiency from 23.56% to 24.33%, a capacity factor improvement of 21 and 52 GW additional power is generated. The optimization of the plant in Dubai has shown further improvements. The efficiency is improved, the Capacity factor is increased by 31.2 and 77.8 GW of additional electricity is produced.

Pakistan is an energy deficient country with depleting energy reserves and increasing energy demand. Due to excessive population growth, the domestic and commercial energy sectors are experiencing rising demand. To meet the requisite demand, renewables are favored rather than conventional counterparts. In this study, we model hybrid power systems using solar, wind and biomass resources for electrifying remote areas. The four locations are chosen for the study around a developing country, Pakistan, where each site is designed according to an isolated microgrid with maximum indigenous resources potential as per the requisite demands. A survey is conducted for the load demand and biomass availability. Optimization is conducted across objectives of minimum levelized cost of the generated energy, least the net present cost and lesser payback period. The optimal results were achieved in-terms of required objectives across southern sites as compared to northern counterparts. The cost of generated energy is comparable to grid electricity and ensures 24 h power supply without cut off and load shedding to the un-electrified rural area. The hybrid power system has a low carbon footprint across emissions due to the use of renewable resources. All the estimated load of rural communities is met with the available resources and mid-career impact has also been conducted across 10 years of the project life to fulfill the increasing load demand of the communities after installation. The results are validated via comparative analysis and show the effectiveness of the proposed study.

Abstract Thermal stratification in a water storage tank can strongly increase the thermal performance of solar heating systems. Thermal stratification can be built up in a storage tank during charge, if the heated water enters through an inlet stratifier. Experiments with a test tank have been carried out in order to elucidate how well thermal stratification is established in the tank with differently designed inlet stratifiers under different controlled laboratory conditions. The investigated inlet stratifiers are from Solvis GmbH & Co KG and EyeCular Technologies ApS. The inlet stratifier from Solvis GmbH is a rigid plastic pipe with holes for each 30 cm. The holes are designed with flaps preventing counter flow into the pipe. The inlet stratifier from EyeCular Technologies ApS is made of a flexible polymer with openings all along the side and in the full length of the stratifier. The flexibility of the stratifier prevents counterflow. The tests have shown that both types of inlet stratifiers had an ability to create stratification in the test tank under the different test conditions. The stratifier from EyeCular Technologies ApS had a better performance at low flows of 1–2 l/min and the stratifier for Solvis GmbH & Co KG had a better performance at 4 l/min. In the intermediate charge test the stratifier from EyeCular Technologies ApS had a better performance in terms of maintaining the thermal stratification in the storage tank while charging with a relative low temperature.