• Energy Research
• engineering and technology close
• 12. Responsible consumption close
• RU close
• BG close

Torrefaction is considered as a method for producing biofuels with improved characteristics compared to those of the “raw” biomass (higher calorific value, moisture resistance, better grindability). The torrefaction process is an endothermic process that is usually carried out in a gaseous atmosphere in the absence of oxygen. To reduce the required heat input, it is proposed to employ the oxidative torrefaction and conduct the process in a fluidized bed agitated with flue gases containing less than 6% oxygen. Preliminary studies of the oxidative torrefaction of sunflower husks, including thermogravimetric analysis of the treated material, have shown that the heat treatment time for the biomass should be at least 5 min. A fluidized bed is a reactor with ideal mixing of the treated material where uniform treatment of raw material particles cannot generally be attained. To overcome this disadvantage of the fluidization technique and achieve the required residence time for biomass in a fluidized bed during a continuous torrefaction process, it was proposed to equip a torrefaction reactor with a series of vertical baffles spaced at 50 mm. These baffles induce a loop-like flow of the processed biomass from the inlet to the outlet of the reactor. To investigate the residence time for husk particles in the reactor, a tracer, which was colored to husk particles' color with a water-soluble dye which did not change the weight and size of the particles, was injected into the bed of uncolored particles. Tracer samples were taken every 30 s at the outlet of the reactor and were analyzed using a special procedure to determine the fraction of colored particles in each sample. This enabled us to gauge the time during which the colored particles injected into the fluidized bed reached the point of their discharge from the bed. Studies performed in a “cold” model of the reactor showed that a series of vertical baffles in the bed can provide the required residence time for biomass in a reactor including commercial reactors. Plates can provide the necessary biomass residence time in the reactor.

The European Geosciences Union (EGU) brings together geoscientists from all over the world covering all disciplines of the Earth, planetary and space sciences. This geoscientific interdisciplinarity is needed to tackle the challenges of the future. One major challenge for humankind is to provide adequate and reliable supplies of affordable energy and other resources in efficient and environmentally sustainable ways. This Energy Procedia issue provides an overview of the contributions of the Division on Energy, Resources & the Environment (ERE) at the EGU General Assembly 2017.

AbstractNowadays, researchers are focusing on the methods of using recycled industrial/agricultural wastes as raw materials, which are not only economically but also environmentally useful. In the recent years, many scholars have conducted research on the rational use of rice husks (RHs) and found that RHs are rich in inorganic/organic components and used in combination with the certain building materials to produce new green composite building materials. This paper studies the method of using RH processed products and the sodium silicate solution (liquid glass) made from RH ash to produce cheap wood substitute composite materials, which can be improved the insulation performance of the wall greatly. Obtained results are determined by comparing with the properties of standard polymer composite materials such as particleboards, chipboards, and medium‐density fiberboards (MDF). The significance of the work is pointing out by solving the problem of recycling large‐tonnage agricultural waste and reproduce products with the consumer's value.

Is it true that a nuclear technology approach to generate electric energy offers a clean, safe, reliable and affordable, i.e., sustainable option? In principle yes, however a technology impact on the environment strongly depends on the actual implementation bearing residual risks due to technical failures, human factors, or natural catastrophes. A full response is thus difficult and can be given first when the wicked multi-disciplinary issues get well formulated and “resolved”. These problems are lying at the interface between: the necessary R&D effort, the industrial deployment and the technology impact in view of the environmental sustainability including the management of produced hazardous waste. As such, this problem is clearly of multi-dimensional nature. This enormous complexity indicates that just a description of the problem might cause a dilemma. The paper proposes a novel holistic approach applying Multi-Criteria Decision Analysis to assess the potential of nuclear energy systems with respect to a sustainable performance. It shows how to establish a multi-level criteria structure tree and examines the trading-off techniques for scoring and ranking of options. The presented framework allows multi-criteria and multi-group treatment. The methodology can be applied to support any pre-decisional process launched in a country to find the best nuclear and/or non-nuclear option according to national preferences and priorities. The approach addresses major aspects of the environmental footprint of nuclear energy systems. As a case study, advanced nuclear fuel cycles are analyzed, which were previously investigated by the Nuclear Energy Agency (NEA/OECD) expert group WASTEMAN. Sustainability facets of waste management, resource utilization and economics are in focus.

Developing a low-carbon economy is the only way for countries to achieve sustainable development. Carbon emission reduction policies and low-carbon technology (LCT) innovation play key roles in developing low-carbon economy. Under government reward and punishment regulations, based on the bilateral matching and evolutionary theories, this paper constructs an evolution model consisting of a manufacturer investing LCT and a supplier offering LCT to analyze multi-phase LCT investment strategies. Firstly, the profit optimization model of a green supply chain is constructed from the perspectives of centralized-matching (CM), decentralized-matching (DM), and mismatching (MM), and the spatial information internal evolution law of multi-phase LCT investment is described by the Markov chain. Then, a bilateral matching algorithm is proposed to solve the equilibrium solutions, and the evolution process of the three modes is analyzed by numerical simulation. Finally, based on the product green degree, we analyze the impact of subsidies and taxes on investment-production decisions. Analytical results show that the matching mechanism proposed in this paper can help supply chain firms to obtain stable matching and has a significant effect on the realization of "triple wins" of society, economy, and environment. The investment utility of CM is higher than that of DM and MM. Manufacturers are inclined to adopt LCT, and the investment level tends to be stable over time. Government reward and punishment regulations are helpful to motivate supply chain firms to invest in LCT, and the synergistic effect of subsidies and taxes is better than that of a single policy.

Abstract We present a production-theoretical approach to decomposing the change of aggregate CO2 emissions over time using the Shephard input distance functions and the environmental data envelopment analysis (DEA) technology in production theory. Application of the proposed approach requires only some aggregate data and the change of aggregate CO2 emissions can be decomposed into contributions from seven factors. These contributions are obtained through solving a series of DEA models. The key features of the proposed approach are the use of panel data to estimate the production frontier and the inclusion of several production technology related components. Using the proposed approach, we present two application studies on decomposing the CO2 emissions for world regions and OECD countries. A comparison between the proposed approach and other decomposition analysis methods is also presented.

The object of the study is the water supply and sanitation system of an industrial enterprise. Currently, many enterprises do not use the treated industrial waste water in the water supply cycle. Therefore, the use of treated wastewater is of practical importance. The scheme of thermal treatment of waste water for obtaining pure condensate by evaporation is proposed. The main results of the study are the technical solution for the development of the enterprise's wastewater treatment complex. Pure condensate is obtained in an instant boiling evaporator. The research method is based on the calculation of energy costs in wastewater treatment for different types of waste water. The results of the study allow us to determine the optimal set of energy equipment for obtaining pure condensate and its further use. The specific practical significance lies in the development of a technical solution that helps the treatment of wastewater and the reduction of emissions into the water basin.

Nowadays, most countries of the world are implementing the transition to the low-carbon economy which implies the need to carry out a full-scale eco-modernization of the energy sector. Green energy may be identified as one of the core concerns of energy sector modernization as it allows a considerable decrease in emissions of harmful substances into the atmosphere. Therefore, nuclear and renewable energy may become key areas of global energy development in the near future, which is also in agreement with circular economy concepts. However, public opinion (and other controversial visions/aspects) is one of the barriers to their development. The purpose of this study is to analyze the relationship between attitudes towards nuclear and renewable energy in two countries: a EU country (Italy) and a non-EU country (Russia), considering the level of their development. The authors conducted a survey among residents regarding their attitude towards nuclear and renewable energy, as well as their attitude to the present energy policy. The cluster analysis technique was used to analyze the results. The obtained results confirmed the dependence between the level of development of nuclear and renewable energy and the public attitude towards it. The national energy policy also might influence public opinion on the development of nuclear or renewable energy. The authors identified public attitude as one of the key factors in the development of energy and the achievement of environmental and social sustainability.